{
  "id": "SP-SLIM-01",
  "revision": "V5-R01",
  "date": "2026-10-16",
  "title": "Slim adult jumping-spider enclosure",
  "scope": "One adult Phidippus regius. Unbuilt review candidate. Not approved for juveniles, spiderlings or offspring.",
  "canonicalUnits": "mm",
  "coordinates": "X right, Y rear, Z up, origin front-left finished case bottom; GLB maps to X right Y up Z front, centred outside floor",
  "outsideMm": [
    304.8,
    203.2,
    304.8
  ],
  "outsideDefinition": "Finished wood case. Latches project 6.2 mm forward; service/open-door space additional.",
  "clearBoxMm": {
    "min": [
      27.94,
      25.4,
      31.75
    ],
    "max": [
      276.86,
      177.8,
      279.4
    ]
  },
  "usableMm": [
    248.92,
    152.4,
    247.65
  ],
  "usableDefinition": "Conservative uninterrupted box above up to 1/2-inch floor layer; excludes cleats, front stops and roof glazing. Furnishings reduce free volume further.",
  "preferredUsableMet": false,
  "parts": [
    {
      "id": "P01",
      "name": "Floor",
      "loMm": [
        0.762,
        0.762,
        0.762
      ],
      "sizeMm": [
        303.276,
        201.676,
        12.7
      ],
      "material": "plywood",
      "group": "floor",
      "grainAxis": 1,
      "holesMm": [],
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "V01",
      "name": "Floor balanced veneer/finish",
      "loMm": [
        0.0,
        0.0,
        0.0
      ],
      "sizeMm": [
        304.8,
        203.2,
        14.224
      ],
      "material": "veneer",
      "group": "floor",
      "grainAxis": 1,
      "holesMm": [],
      "notes": "Complete 0.030-inch reference stack, not vendor veneer thickness",
      "shellOf": "P01",
      "stackMm": 0.762
    },
    {
      "id": "P02",
      "name": "Roof surround",
      "loMm": [
        0.762,
        0.762,
        291.338
      ],
      "sizeMm": [
        303.276,
        201.676,
        12.7
      ],
      "material": "plywood",
      "group": "roof",
      "grainAxis": 0,
      "holesMm": [
        {
          "lo": [
            50.038,
            50.038,
            286.258
          ],
          "size": [
            204.724,
            103.124,
            26.924
          ]
        }
      ],
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "V02",
      "name": "Roof surround balanced veneer/finish",
      "loMm": [
        0.0,
        0.0,
        290.576
      ],
      "sizeMm": [
        304.8,
        203.2,
        14.224
      ],
      "material": "veneer",
      "group": "roof",
      "grainAxis": 0,
      "holesMm": [
        {
          "lo": [
            50.8,
            50.8,
            287.02
          ],
          "size": [
            203.2,
            101.6,
            25.4
          ]
        }
      ],
      "notes": "Complete 0.030-inch reference stack, not vendor veneer thickness",
      "shellOf": "P02",
      "stackMm": 0.762
    },
    {
      "id": "P03",
      "name": "Left wall",
      "loMm": [
        0.762,
        0.762,
        13.462
      ],
      "sizeMm": [
        12.7,
        201.676,
        277.876
      ],
      "material": "plywood",
      "group": "left",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            37.338,
            37.338
          ],
          "size": [
            309.88,
            128.524,
            26.924
          ]
        },
        {
          "lo": [
            -2.54,
            37.338,
            227.838
          ],
          "size": [
            309.88,
            128.524,
            26.924
          ]
        }
      ],
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "V03",
      "name": "Left wall balanced veneer/finish",
      "loMm": [
        0.0,
        0.0,
        12.7
      ],
      "sizeMm": [
        14.224,
        203.2,
        279.4
      ],
      "material": "veneer",
      "group": "left",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            38.1
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        },
        {
          "lo": [
            -2.54,
            38.1,
            228.6
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "Complete 0.030-inch reference stack, not vendor veneer thickness",
      "shellOf": "P03",
      "stackMm": 0.762
    },
    {
      "id": "P04",
      "name": "Right wall",
      "loMm": [
        291.338,
        0.762,
        13.462
      ],
      "sizeMm": [
        12.7,
        201.676,
        277.876
      ],
      "material": "plywood",
      "group": "right",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            37.338,
            37.338
          ],
          "size": [
            309.88,
            128.524,
            26.924
          ]
        },
        {
          "lo": [
            -2.54,
            37.338,
            227.838
          ],
          "size": [
            309.88,
            128.524,
            26.924
          ]
        }
      ],
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "V04",
      "name": "Right wall balanced veneer/finish",
      "loMm": [
        290.576,
        0.0,
        12.7
      ],
      "sizeMm": [
        14.224,
        203.2,
        279.4
      ],
      "material": "veneer",
      "group": "right",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            38.1
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        },
        {
          "lo": [
            -2.54,
            38.1,
            228.6
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "Complete 0.030-inch reference stack, not vendor veneer thickness",
      "shellOf": "P04",
      "stackMm": 0.762
    },
    {
      "id": "P05",
      "name": "Back",
      "loMm": [
        13.462,
        189.738,
        13.462
      ],
      "sizeMm": [
        277.876,
        12.7,
        277.876
      ],
      "material": "plywood",
      "group": "back",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "V05",
      "name": "Back balanced veneer/finish",
      "loMm": [
        12.7,
        188.976,
        12.7
      ],
      "sizeMm": [
        279.4,
        14.224,
        279.4
      ],
      "material": "veneer",
      "group": "back",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Complete 0.030-inch reference stack, not vendor veneer thickness",
      "shellOf": "P05",
      "stackMm": 0.762
    },
    {
      "id": "P06",
      "name": "Fixed front",
      "loMm": [
        13.462,
        0.762,
        13.462
      ],
      "sizeMm": [
        277.876,
        12.7,
        277.876
      ],
      "material": "plywood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            24.637999999999998,
            -3.302,
            24.637999999999998
          ],
          "size": [
            255.524,
            26.924,
            211.074
          ]
        },
        {
          "lo": [
            24.637999999999998,
            -3.302,
            246.888
          ],
          "size": [
            255.524,
            26.924,
            26.924
          ]
        }
      ],
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "V06",
      "name": "Fixed front balanced veneer/finish",
      "loMm": [
        12.7,
        0.0,
        12.7
      ],
      "sizeMm": [
        279.4,
        14.224,
        279.4
      ],
      "material": "veneer",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            25.4,
            -2.54,
            25.4
          ],
          "size": [
            254.0,
            25.4,
            209.55
          ]
        },
        {
          "lo": [
            25.4,
            -2.54,
            247.65
          ],
          "size": [
            254.0,
            25.4,
            25.4
          ]
        }
      ],
      "notes": "Complete 0.030-inch reference stack, not vendor veneer thickness",
      "shellOf": "P06",
      "stackMm": 0.762
    },
    {
      "id": "P07",
      "name": "Door frame",
      "loMm": [
        27.686,
        0.762,
        27.686
      ],
      "sizeMm": [
        249.428,
        12.7,
        204.978
      ],
      "material": "plywood",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            51.562,
            -3.302,
            51.562
          ],
          "size": [
            201.676,
            26.924,
            157.226
          ]
        }
      ],
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "V07",
      "name": "Door frame balanced veneer/finish",
      "loMm": [
        26.924,
        0.0,
        26.924
      ],
      "sizeMm": [
        250.952,
        14.224,
        206.502
      ],
      "material": "veneer",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            52.324,
            -2.54,
            52.324
          ],
          "size": [
            200.152,
            25.4,
            155.702
          ]
        }
      ],
      "notes": "Complete 0.030-inch reference stack, not vendor veneer thickness",
      "shellOf": "P07",
      "stackMm": 0.762
    },
    {
      "id": "CLB",
      "name": "L B side cleat",
      "loMm": [
        14.224,
        14.224,
        14.224
      ],
      "sizeMm": [
        9.525,
        174.752,
        9.525
      ],
      "material": "hardwood",
      "group": "left",
      "grainAxis": 1,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "CLT",
      "name": "L T side cleat",
      "loMm": [
        14.224,
        14.224,
        281.051
      ],
      "sizeMm": [
        9.525,
        174.752,
        9.525
      ],
      "material": "hardwood",
      "group": "left",
      "grainAxis": 1,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "CLF",
      "name": "L F corner cleat",
      "loMm": [
        14.224,
        14.224,
        23.749
      ],
      "sizeMm": [
        9.525,
        9.525,
        257.302
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "CLK",
      "name": "L K corner cleat",
      "loMm": [
        14.224,
        179.451,
        23.749
      ],
      "sizeMm": [
        9.525,
        9.525,
        257.302
      ],
      "material": "hardwood",
      "group": "back",
      "grainAxis": 2,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "CRB",
      "name": "R B side cleat",
      "loMm": [
        281.051,
        14.224,
        14.224
      ],
      "sizeMm": [
        9.525,
        174.752,
        9.525
      ],
      "material": "hardwood",
      "group": "right",
      "grainAxis": 1,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "CRT",
      "name": "R T side cleat",
      "loMm": [
        281.051,
        14.224,
        281.051
      ],
      "sizeMm": [
        9.525,
        174.752,
        9.525
      ],
      "material": "hardwood",
      "group": "right",
      "grainAxis": 1,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "CRF",
      "name": "R F corner cleat",
      "loMm": [
        281.051,
        14.224,
        23.749
      ],
      "sizeMm": [
        9.525,
        9.525,
        257.302
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "CRK",
      "name": "R K corner cleat",
      "loMm": [
        281.051,
        179.451,
        23.749
      ],
      "sizeMm": [
        9.525,
        9.525,
        257.302
      ],
      "material": "hardwood",
      "group": "back",
      "grainAxis": 2,
      "holesMm": [],
      "notes": ""
    },
    {
      "id": "A01",
      "name": "Floor splash panel",
      "loMm": [
        24.13,
        24.13,
        14.224
      ],
      "sizeMm": [
        256.54,
        154.94,
        3.0
      ],
      "material": "acrylic",
      "group": "floor",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "A02",
      "name": "Back splash panel",
      "loMm": [
        24.13,
        185.976,
        24.13
      ],
      "sizeMm": [
        256.54,
        3.0,
        256.54
      ],
      "material": "acrylic",
      "group": "back",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "AL",
      "name": "Side splash panel L",
      "loMm": [
        14.6812,
        24.13,
        24.13
      ],
      "sizeMm": [
        3.0,
        154.94,
        256.54
      ],
      "material": "acrylic",
      "group": "left",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            38.1
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        },
        {
          "lo": [
            -2.54,
            38.1,
            228.6
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "ML1",
      "name": "Fine mesh L1",
      "loMm": [
        14.224,
        29.21,
        29.21
      ],
      "sizeMm": [
        0.4572,
        144.78,
        43.18
      ],
      "material": "mesh",
      "group": "left",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "M01"
    },
    {
      "id": "RL1",
      "name": "Vent retaining ring L1",
      "loMm": [
        17.6812,
        26.67,
        26.67
      ],
      "sizeMm": [
        3.0,
        149.86,
        48.26
      ],
      "material": "acrylic",
      "group": "left",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            38.1
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "ML2",
      "name": "Fine mesh L2",
      "loMm": [
        14.224,
        29.21,
        219.71
      ],
      "sizeMm": [
        0.4572,
        144.78,
        43.18
      ],
      "material": "mesh",
      "group": "left",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "M01"
    },
    {
      "id": "RL2",
      "name": "Vent retaining ring L2",
      "loMm": [
        17.6812,
        26.67,
        217.17
      ],
      "sizeMm": [
        3.0,
        149.86,
        48.26
      ],
      "material": "acrylic",
      "group": "left",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            228.6
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "AR",
      "name": "Side splash panel R",
      "loMm": [
        287.1188,
        24.13,
        24.13
      ],
      "sizeMm": [
        3.0,
        154.94,
        256.54
      ],
      "material": "acrylic",
      "group": "right",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            38.1
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        },
        {
          "lo": [
            -2.54,
            38.1,
            228.6
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "MR1",
      "name": "Fine mesh R1",
      "loMm": [
        290.1188,
        29.21,
        29.21
      ],
      "sizeMm": [
        0.4572,
        144.78,
        43.18
      ],
      "material": "mesh",
      "group": "right",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "M01"
    },
    {
      "id": "RR1",
      "name": "Vent retaining ring R1",
      "loMm": [
        284.1188,
        26.67,
        26.67
      ],
      "sizeMm": [
        3.0,
        149.86,
        48.26
      ],
      "material": "acrylic",
      "group": "right",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            38.1
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "MR2",
      "name": "Fine mesh R2",
      "loMm": [
        290.1188,
        29.21,
        219.71
      ],
      "sizeMm": [
        0.4572,
        144.78,
        43.18
      ],
      "material": "mesh",
      "group": "right",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "M01"
    },
    {
      "id": "RR2",
      "name": "Vent retaining ring R2",
      "loMm": [
        284.1188,
        26.67,
        217.17
      ],
      "sizeMm": [
        3.0,
        149.86,
        48.26
      ],
      "material": "acrylic",
      "group": "right",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            -2.54,
            38.1,
            228.6
          ],
          "size": [
            309.88,
            127.0,
            25.4
          ]
        }
      ],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "A03",
      "name": "Fixed roof pane",
      "loMm": [
        38.1,
        38.1,
        287.576
      ],
      "sizeMm": [
        228.6,
        127.0,
        3.0
      ],
      "material": "acrylic",
      "group": "roof",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "A04",
      "name": "Fixed transom pane",
      "loMm": [
        17.78,
        14.224,
        236.22
      ],
      "sizeMm": [
        269.24,
        3.0,
        48.26
      ],
      "material": "acrylic",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "A05",
      "name": "Door glazing and seal face",
      "loMm": [
        26.924,
        14.224,
        26.924
      ],
      "sizeMm": [
        250.952,
        3.0,
        206.502
      ],
      "material": "acrylic",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "G01",
      "name": "One-piece door seal",
      "loMm": [
        29.21,
        17.224,
        29.21
      ],
      "sizeMm": [
        246.38,
        1.20015,
        201.93
      ],
      "material": "gasket",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            32.385,
            0.0,
            32.385
          ],
          "size": [
            240.03,
            50.8,
            195.58
          ]
        }
      ],
      "notes": "Nominal 25% compression; set support from measured free ring thickness; supplier die-cut tolerance held",
      "product": "G01"
    },
    {
      "id": "G01B",
      "name": "Enclosed converter-applied seal backing",
      "loMm": [
        29.21,
        18.42415,
        29.21
      ],
      "sizeMm": [
        246.38,
        0.127,
        201.93
      ],
      "material": "backing",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            32.385,
            0.0,
            32.385
          ],
          "size": [
            240.03,
            50.8,
            195.58
          ]
        }
      ],
      "notes": "0.005-inch planning envelope only. Converter must specify compatible PSA and delivered thickness; fully bonded back face, no exposed or loose adhesive edge",
      "product": "G01"
    },
    {
      "id": "A06",
      "name": "Adjustable continuous door stop",
      "loMm": [
        16.51,
        18.55115,
        16.51
      ],
      "sizeMm": [
        271.78,
        3.0,
        227.33
      ],
      "material": "acrylic",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [
        {
          "lo": [
            33.02,
            0.0,
            33.02
          ],
          "size": [
            238.76,
            50.8,
            194.31
          ]
        }
      ],
      "notes": "Stand-off spacers must be individually measured and fitted; do not fix to nominal position",
      "product": "A01"
    },
    {
      "id": "DCL1",
      "name": "Door glazing keeper 1",
      "loMm": [
        30.48,
        17.224,
        29.21
      ],
      "sizeMm": [
        243.84,
        3.0,
        6.35
      ],
      "material": "acrylic",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "DCL2",
      "name": "Door glazing keeper 2",
      "loMm": [
        30.48,
        17.224,
        224.79
      ],
      "sizeMm": [
        243.84,
        3.0,
        6.35
      ],
      "material": "acrylic",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "DCL3",
      "name": "Door glazing keeper 3",
      "loMm": [
        29.21,
        17.224,
        35.56
      ],
      "sizeMm": [
        6.35,
        3.0,
        189.23
      ],
      "material": "acrylic",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "DCL4",
      "name": "Door glazing keeper 4",
      "loMm": [
        269.24,
        17.224,
        35.56
      ],
      "sizeMm": [
        6.35,
        3.0,
        189.23
      ],
      "material": "acrylic",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "K1",
      "name": "Roof pane keeper K1",
      "loMm": [
        38.1,
        38.1,
        284.576
      ],
      "sizeMm": [
        12.7,
        127.0,
        3.0
      ],
      "material": "acrylic",
      "group": "roof",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "K2",
      "name": "Roof pane keeper K2",
      "loMm": [
        254.0,
        38.1,
        284.576
      ],
      "sizeMm": [
        12.7,
        127.0,
        3.0
      ],
      "material": "acrylic",
      "group": "roof",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "K3",
      "name": "Roof pane keeper K3",
      "loMm": [
        50.8,
        38.1,
        284.576
      ],
      "sizeMm": [
        203.2,
        12.7,
        3.0
      ],
      "material": "acrylic",
      "group": "roof",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "K4",
      "name": "Roof pane keeper K4",
      "loMm": [
        50.8,
        152.4,
        284.576
      ],
      "sizeMm": [
        203.2,
        12.7,
        3.0
      ],
      "material": "acrylic",
      "group": "roof",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "A01"
    },
    {
      "id": "H1fixed",
      "name": "Hinge 1 fixed leaf",
      "loMm": [
        17.78,
        -0.508,
        50.8
      ],
      "sizeMm": [
        7.62,
        1.143,
        38.1
      ],
      "material": "brass",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Envelope only; mortise/axis from received 00D0103",
      "product": "H01"
    },
    {
      "id": "H1moving",
      "name": "Hinge 1 moving leaf",
      "loMm": [
        26.416,
        -0.508,
        50.8
      ],
      "sizeMm": [
        7.62,
        1.143,
        38.1
      ],
      "material": "brass",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Envelope only; mortise/axis from received 00D0103",
      "product": "H01"
    },
    {
      "id": "HP1",
      "name": "Hinge 1 pin",
      "loMm": [
        25.4,
        -1.524,
        50.8
      ],
      "sizeMm": [
        1.524,
        1.524,
        38.1
      ],
      "material": "brass",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "H01",
      "cylinderAxis": 2
    },
    {
      "id": "H2fixed",
      "name": "Hinge 2 fixed leaf",
      "loMm": [
        17.78,
        -0.508,
        171.45
      ],
      "sizeMm": [
        7.62,
        1.143,
        38.1
      ],
      "material": "brass",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Envelope only; mortise/axis from received 00D0103",
      "product": "H01"
    },
    {
      "id": "H2moving",
      "name": "Hinge 2 moving leaf",
      "loMm": [
        26.416,
        -0.508,
        171.45
      ],
      "sizeMm": [
        7.62,
        1.143,
        38.1
      ],
      "material": "brass",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Envelope only; mortise/axis from received 00D0103",
      "product": "H01"
    },
    {
      "id": "HP2",
      "name": "Hinge 2 pin",
      "loMm": [
        25.4,
        -1.524,
        171.45
      ],
      "sizeMm": [
        1.524,
        1.524,
        38.1
      ],
      "material": "brass",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "H01",
      "cylinderAxis": 2
    },
    {
      "id": "LB1",
      "name": "SCC25 body 1",
      "loMm": [
        255.27,
        -6.2,
        69.45
      ],
      "sizeMm": [
        23.5,
        6.2,
        13.5
      ],
      "material": "steel",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "H02"
    },
    {
      "id": "LC1",
      "name": "SCC25 counterplate 1",
      "loMm": [
        280.035,
        -1.0,
        69.45
      ],
      "sizeMm": [
        7.6,
        1.0,
        13.5
      ],
      "material": "steel",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "H02"
    },
    {
      "id": "LB2",
      "name": "SCC25 body 2",
      "loMm": [
        255.27,
        -6.2,
        181.21
      ],
      "sizeMm": [
        23.5,
        6.2,
        13.5
      ],
      "material": "steel",
      "group": "door",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "H02"
    },
    {
      "id": "LC2",
      "name": "SCC25 counterplate 2",
      "loMm": [
        280.035,
        -1.0,
        181.21
      ],
      "sizeMm": [
        7.6,
        1.0,
        13.5
      ],
      "material": "steel",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "",
      "product": "H02"
    },
    {
      "id": "SP0",
      "name": "Measured door-stop spacer DS0",
      "loMm": [
        17.145,
        14.224,
        22.225
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP1",
      "name": "Measured door-stop spacer DS1",
      "loMm": [
        17.145,
        14.224,
        111.125
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP2",
      "name": "Measured door-stop spacer DS2",
      "loMm": [
        17.145,
        14.224,
        235.585
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP3",
      "name": "Measured door-stop spacer DS3",
      "loMm": [
        281.305,
        14.224,
        22.225
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP4",
      "name": "Measured door-stop spacer DS4",
      "loMm": [
        281.305,
        14.224,
        111.125
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP5",
      "name": "Measured door-stop spacer DS5",
      "loMm": [
        281.305,
        14.224,
        235.585
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP6",
      "name": "Measured door-stop spacer DS6",
      "loMm": [
        98.425,
        14.224,
        17.145
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP7",
      "name": "Measured door-stop spacer DS7",
      "loMm": [
        200.025,
        14.224,
        17.145
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP8",
      "name": "Measured door-stop spacer DS8",
      "loMm": [
        98.425,
        14.224,
        236.855
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP9",
      "name": "Measured door-stop spacer DS9",
      "loMm": [
        200.025,
        14.224,
        236.855
      ],
      "sizeMm": [
        6.35,
        4.32715,
        6.35
      ],
      "material": "hardwood",
      "group": "front",
      "grainAxis": 2,
      "holesMm": [],
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    }
  ],
  "stations": [
    {
      "id": "H1-front--0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "front",
      "receiver": "P06",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        21.082,
        -0.508,
        57.15
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H1-front-0",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "front",
      "receiver": "P06",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        21.082,
        -0.508,
        69.85
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H1-front-0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "front",
      "receiver": "P06",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        21.082,
        -0.508,
        82.55
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H1-door--0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "door",
      "receiver": "P07",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        30.48,
        -0.508,
        57.15
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H1-door-0",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "door",
      "receiver": "P07",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        30.48,
        -0.508,
        69.85
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H1-door-0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "door",
      "receiver": "P07",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        30.48,
        -0.508,
        82.55
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H2-front--0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "front",
      "receiver": "P06",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        21.082,
        -0.508,
        177.8
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H2-front-0",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "front",
      "receiver": "P06",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        21.082,
        -0.508,
        190.5
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H2-front-0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "front",
      "receiver": "P06",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        21.082,
        -0.508,
        203.2
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H2-door--0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "door",
      "receiver": "P07",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        30.48,
        -0.508,
        177.8
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H2-door-0",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "door",
      "receiver": "P07",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        30.48,
        -0.508,
        190.5
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "H2-door-0.5",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F2",
      "group": "door",
      "receiver": "P07",
      "status": "Provisional envelope: exact #2 pattern/length must match received hinge",
      "entryMm": [
        30.48,
        -0.508,
        203.2
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.1843999999999997,
      "throughMm": 1.1429999999999998,
      "penetrationMm": 8.381999999999998,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT1-0",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        283.845,
        0.0,
        72.2
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT1-1",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        283.845,
        0.0,
        80.2
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT1-2",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "door",
      "receiver": "P07",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        262.89,
        0.0,
        76.2
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT1-3",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "door",
      "receiver": "P07",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        274.39,
        0.0,
        76.2
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT2-0",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        283.845,
        0.0,
        183.96
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT2-1",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        283.845,
        0.0,
        191.96
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT2-2",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "door",
      "receiver": "P07",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        262.89,
        0.0,
        187.96
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "LT2-3",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4short",
      "group": "door",
      "receiver": "P07",
      "status": "Nominal transfer; catch position from compressed seal",
      "entryMm": [
        274.39,
        0.0,
        187.96
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 0.9999999999999999,
      "penetrationMm": 8.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-L-0.7475-1.25",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        23.749,
        31.75,
        18.9865
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-L-0.7475-4",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        23.749,
        101.6,
        18.9865
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-L-0.7475-6.75",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        23.749,
        171.45,
        18.9865
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-L-11.2525-1.25",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        23.749,
        31.75,
        285.8135
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-L-11.2525-4",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        23.749,
        101.6,
        285.8135
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-L-11.2525-6.75",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        23.749,
        171.45,
        285.8135
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-L-0.7475-1.5",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot",
      "entryMm": [
        23.749,
        18.9865,
        38.1
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-L-0.7475-5.5",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot",
      "entryMm": [
        23.749,
        18.9865,
        139.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-L-0.7475-10.5",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot",
      "entryMm": [
        23.749,
        18.9865,
        266.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-L-7.2525-1.5",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot",
      "entryMm": [
        23.749,
        184.2135,
        38.1
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-L-7.2525-5.5",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot",
      "entryMm": [
        23.749,
        184.2135,
        139.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-L-7.2525-10.5",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4long",
      "group": "left",
      "receiver": "P03",
      "status": "Coupon-selected pilot",
      "entryMm": [
        23.749,
        184.2135,
        266.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-L-0.935-2",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4long",
      "group": "front",
      "receiver": "P06",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        18.9865,
        23.749,
        50.8
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-L-0.935-6",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4long",
      "group": "front",
      "receiver": "P06",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        18.9865,
        23.749,
        152.4
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-L-0.935-10",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4long",
      "group": "front",
      "receiver": "P06",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        18.9865,
        23.749,
        254.0
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-L-7.065-2",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4long",
      "group": "back",
      "receiver": "P05",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        18.9865,
        179.451,
        50.8
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-L-7.065-6",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4long",
      "group": "back",
      "receiver": "P05",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        18.9865,
        179.451,
        152.4
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-L-7.065-10",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4long",
      "group": "back",
      "receiver": "P05",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        18.9865,
        179.451,
        254.0
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-L-0.935-1.5",
      "axis": [
        0,
        0,
        -1
      ],
      "product": "F4long",
      "group": "floor",
      "receiver": "P01",
      "status": "Coupon-selected pilot",
      "entryMm": [
        18.9865,
        38.1,
        23.749
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-L-0.935-4.25",
      "axis": [
        0,
        0,
        -1
      ],
      "product": "F4long",
      "group": "floor",
      "receiver": "P01",
      "status": "Coupon-selected pilot",
      "entryMm": [
        18.9865,
        107.95,
        23.749
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-L-0.935-6.5",
      "axis": [
        0,
        0,
        -1
      ],
      "product": "F4long",
      "group": "floor",
      "receiver": "P01",
      "status": "Coupon-selected pilot",
      "entryMm": [
        18.9865,
        165.1,
        23.749
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-L-11.065-1.5",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4long",
      "group": "roof",
      "receiver": "P02",
      "status": "Coupon-selected pilot",
      "entryMm": [
        18.9865,
        38.1,
        281.051
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-L-11.065-4.25",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4long",
      "group": "roof",
      "receiver": "P02",
      "status": "Coupon-selected pilot",
      "entryMm": [
        18.9865,
        107.95,
        281.051
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-L-11.065-6.5",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4long",
      "group": "roof",
      "receiver": "P02",
      "status": "Coupon-selected pilot",
      "entryMm": [
        18.9865,
        165.1,
        281.051
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-R-0.7475-1.25",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        281.051,
        31.75,
        18.9865
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-R-0.7475-4",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        281.051,
        101.6,
        18.9865
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-R-0.7475-6.75",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        281.051,
        171.45,
        18.9865
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-R-11.2525-1.25",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        281.051,
        31.75,
        285.8135
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-R-11.2525-4",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        281.051,
        101.6,
        285.8135
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CS-R-11.2525-6.75",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot; no exterior breakthrough",
      "entryMm": [
        281.051,
        171.45,
        285.8135
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-R-0.7475-1.5",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot",
      "entryMm": [
        281.051,
        18.9865,
        38.1
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-R-0.7475-5.5",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot",
      "entryMm": [
        281.051,
        18.9865,
        139.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-R-0.7475-10.5",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot",
      "entryMm": [
        281.051,
        18.9865,
        266.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-R-7.2525-1.5",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot",
      "entryMm": [
        281.051,
        184.2135,
        38.1
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-R-7.2525-5.5",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot",
      "entryMm": [
        281.051,
        184.2135,
        139.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CV-R-7.2525-10.5",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4long",
      "group": "right",
      "receiver": "P04",
      "status": "Coupon-selected pilot",
      "entryMm": [
        281.051,
        184.2135,
        266.7
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-R-0.935-2",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4long",
      "group": "front",
      "receiver": "P06",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        285.8135,
        23.749,
        50.8
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-R-0.935-6",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4long",
      "group": "front",
      "receiver": "P06",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        285.8135,
        23.749,
        152.4
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-R-0.935-10",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4long",
      "group": "front",
      "receiver": "P06",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        285.8135,
        23.749,
        254.0
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-R-7.065-2",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4long",
      "group": "back",
      "receiver": "P05",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        285.8135,
        179.451,
        50.8
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-R-7.065-6",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4long",
      "group": "back",
      "receiver": "P05",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        285.8135,
        179.451,
        152.4
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CB-R-7.065-10",
      "axis": [
        0,
        1,
        0
      ],
      "product": "F4long",
      "group": "back",
      "receiver": "P05",
      "status": "Coupon-selected pilot; staggered from perpendicular side screw",
      "entryMm": [
        285.8135,
        179.451,
        254.0
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-R-0.935-1.5",
      "axis": [
        0,
        0,
        -1
      ],
      "product": "F4long",
      "group": "floor",
      "receiver": "P01",
      "status": "Coupon-selected pilot",
      "entryMm": [
        285.8135,
        38.1,
        23.749
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-R-0.935-4.25",
      "axis": [
        0,
        0,
        -1
      ],
      "product": "F4long",
      "group": "floor",
      "receiver": "P01",
      "status": "Coupon-selected pilot",
      "entryMm": [
        285.8135,
        107.95,
        23.749
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-R-0.935-6.5",
      "axis": [
        0,
        0,
        -1
      ],
      "product": "F4long",
      "group": "floor",
      "receiver": "P01",
      "status": "Coupon-selected pilot",
      "entryMm": [
        285.8135,
        165.1,
        23.749
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-R-11.065-1.5",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4long",
      "group": "roof",
      "receiver": "P02",
      "status": "Coupon-selected pilot",
      "entryMm": [
        285.8135,
        38.1,
        281.051
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-R-11.065-4.25",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4long",
      "group": "roof",
      "receiver": "P02",
      "status": "Coupon-selected pilot",
      "entryMm": [
        285.8135,
        107.95,
        281.051
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "CF-R-11.065-6.5",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4long",
      "group": "roof",
      "receiver": "P02",
      "status": "Coupon-selected pilot",
      "entryMm": [
        285.8135,
        165.1,
        281.051
      ],
      "lengthMm": 19.049999999999997,
      "diameterMm": 2.8447999999999998,
      "throughMm": 9.524999999999999,
      "penetrationMm": 9.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-1.275-1.275",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        32.385,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-1.275-2.725",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        32.385,
        69.215
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-4-1.275",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        101.6,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-4-2.725",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        101.6,
        69.215
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-6.725-1.275",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        170.815,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-6.725-2.725",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        170.815,
        69.215
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-1.275-8.775",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        32.385,
        222.885
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-1.275-10.225",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        32.385,
        259.715
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-4-8.775",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        101.6,
        222.885
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-4-10.225",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        101.6,
        259.715
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-6.725-8.775",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        170.815,
        222.885
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-L-6.725-10.225",
      "axis": [
        -1,
        0,
        0
      ],
      "product": "F4med",
      "group": "left",
      "receiver": "P03",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        20.6812,
        170.815,
        259.715
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-1.275-1.275",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        32.385,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-1.275-2.725",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        32.385,
        69.215
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-4-1.275",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        101.6,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-4-2.725",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        101.6,
        69.215
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-6.725-1.275",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        170.815,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-6.725-2.725",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        170.815,
        69.215
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-1.275-8.775",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        32.385,
        222.885
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-1.275-10.225",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        32.385,
        259.715
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-4-8.775",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        101.6,
        222.885
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-4-10.225",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        101.6,
        259.715
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-6.725-8.775",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        170.815,
        222.885
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "VR-R-6.725-10.225",
      "axis": [
        1,
        0,
        0
      ],
      "product": "F4med",
      "group": "right",
      "receiver": "P04",
      "status": "Flat-head counterbore in keeper only; pan head accepted inside if coupon demands",
      "entryMm": [
        284.1188,
        170.815,
        259.715
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.4572,
      "penetrationMm": 6.242799999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG0",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        33.02,
        20.224,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG1",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        101.6,
        20.224,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG2",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        203.2,
        20.224,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG3",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        271.78,
        20.224,
        32.385
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG4",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        33.02,
        20.224,
        227.965
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG5",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        101.6,
        20.224,
        227.965
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG6",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        203.2,
        20.224,
        227.965
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG7",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        271.78,
        20.224,
        227.965
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG8",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        32.385,
        20.224,
        114.3
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DG9",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4med",
      "group": "door",
      "receiver": "P07",
      "status": "Pane and keeper clearance holes; no force-fit screw in acrylic",
      "entryMm": [
        272.415,
        20.224,
        114.3
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS0",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        20.32,
        21.55115,
        25.4
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS1",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        20.32,
        21.55115,
        114.3
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS2",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        20.32,
        21.55115,
        238.76
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS3",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        284.48,
        21.55115,
        25.4
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS4",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        284.48,
        21.55115,
        114.3
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS5",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        284.48,
        21.55115,
        238.76
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS6",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        101.6,
        21.55115,
        20.32
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS7",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        203.2,
        21.55115,
        20.32
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS8",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        101.6,
        21.55115,
        240.03
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "DS9",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4stop",
      "group": "front",
      "receiver": "P06",
      "status": "Measured spacers support stop without bending it; clearance holes in acrylic",
      "entryMm": [
        203.2,
        21.55115,
        240.03
      ],
      "lengthMm": 15.875,
      "diameterMm": 2.8447999999999998,
      "throughMm": 7.3271500000000005,
      "penetrationMm": 8.54785,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK0",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        44.45,
        50.8,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK1",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        44.45,
        101.6,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK2",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        44.45,
        152.4,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK3",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        260.35,
        50.8,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK4",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        260.35,
        101.6,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK5",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        260.35,
        152.4,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK6",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        101.6,
        44.45,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK7",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        203.2,
        44.45,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK8",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        101.6,
        158.75,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "RK9",
      "axis": [
        0,
        0,
        1
      ],
      "product": "F4med",
      "group": "roof",
      "receiver": "P02",
      "status": "Mechanical roof pane retainers; clearance holes in acrylic",
      "entryMm": [
        203.2,
        158.75,
        284.576
      ],
      "lengthMm": 12.7,
      "diameterMm": 2.8447999999999998,
      "throughMm": 6.0,
      "penetrationMm": 6.699999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG0",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        25.4,
        17.224,
        241.3
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG1",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        101.6,
        17.224,
        241.3
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG2",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        203.2,
        17.224,
        241.3
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG3",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        279.4,
        17.224,
        241.3
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG4",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        25.4,
        17.224,
        279.4
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG5",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        101.6,
        17.224,
        279.4
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG6",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        203.2,
        17.224,
        279.4
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    },
    {
      "id": "TG7",
      "axis": [
        0,
        -1,
        0
      ],
      "product": "F4short",
      "group": "front",
      "receiver": "P06",
      "status": "Pane clearance holes, washers; do not squeeze acrylic",
      "entryMm": [
        279.4,
        17.224,
        279.4
      ],
      "lengthMm": 9.524999999999999,
      "diameterMm": 2.8447999999999998,
      "throughMm": 3.0,
      "penetrationMm": 6.524999999999999,
      "head": "flush on exterior hardware; inside countersink only after coupon; no exposed point"
    }
  ],
  "cuts": [
    {
      "id": "P01",
      "name": "Floor",
      "material": "plywood",
      "quantity": 1,
      "finishedMm": [
        303.276,
        201.676,
        12.7
      ],
      "roughMm": [
        309.62600000000003,
        208.02599999999998,
        12.7
      ],
      "axes": [
        0,
        1,
        2
      ],
      "grainAxis": 1,
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "P02",
      "name": "Roof surround",
      "material": "plywood",
      "quantity": 1,
      "finishedMm": [
        303.276,
        201.676,
        12.7
      ],
      "roughMm": [
        309.62600000000003,
        208.02599999999998,
        12.7
      ],
      "axes": [
        0,
        1,
        2
      ],
      "grainAxis": 0,
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "P03",
      "name": "Left wall",
      "material": "plywood",
      "quantity": 1,
      "finishedMm": [
        277.876,
        201.676,
        12.7
      ],
      "roughMm": [
        284.226,
        208.02599999999998,
        12.7
      ],
      "axes": [
        2,
        1,
        0
      ],
      "grainAxis": 2,
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "P04",
      "name": "Right wall",
      "material": "plywood",
      "quantity": 1,
      "finishedMm": [
        277.876,
        201.676,
        12.7
      ],
      "roughMm": [
        284.226,
        208.02599999999998,
        12.7
      ],
      "axes": [
        2,
        1,
        0
      ],
      "grainAxis": 2,
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "P05",
      "name": "Back",
      "material": "plywood",
      "quantity": 1,
      "finishedMm": [
        277.876,
        277.876,
        12.7
      ],
      "roughMm": [
        284.226,
        284.226,
        12.7
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "P06",
      "name": "Fixed front",
      "material": "plywood",
      "quantity": 1,
      "finishedMm": [
        277.876,
        277.876,
        12.7
      ],
      "roughMm": [
        284.226,
        284.226,
        12.7
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "P07",
      "name": "Door frame",
      "material": "plywood",
      "quantity": 1,
      "finishedMm": [
        249.428,
        204.978,
        12.7
      ],
      "roughMm": [
        255.778,
        211.328,
        12.7
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference 1/2-inch core; receive thickness before releasing cuts"
    },
    {
      "id": "CLB",
      "name": "L B side cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        174.752,
        9.525,
        9.525
      ],
      "roughMm": [
        181.102,
        15.875,
        9.525
      ],
      "axes": [
        1,
        0,
        2
      ],
      "grainAxis": 1,
      "notes": ""
    },
    {
      "id": "CLT",
      "name": "L T side cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        174.752,
        9.525,
        9.525
      ],
      "roughMm": [
        181.102,
        15.875,
        9.525
      ],
      "axes": [
        1,
        0,
        2
      ],
      "grainAxis": 1,
      "notes": ""
    },
    {
      "id": "CLF",
      "name": "L F corner cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        257.302,
        9.525,
        9.525
      ],
      "roughMm": [
        263.65200000000004,
        15.875,
        9.525
      ],
      "axes": [
        2,
        0,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "CLK",
      "name": "L K corner cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        257.302,
        9.525,
        9.525
      ],
      "roughMm": [
        263.65200000000004,
        15.875,
        9.525
      ],
      "axes": [
        2,
        0,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "CRB",
      "name": "R B side cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        174.752,
        9.525,
        9.525
      ],
      "roughMm": [
        181.102,
        15.875,
        9.525
      ],
      "axes": [
        1,
        0,
        2
      ],
      "grainAxis": 1,
      "notes": ""
    },
    {
      "id": "CRT",
      "name": "R T side cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        174.752,
        9.525,
        9.525
      ],
      "roughMm": [
        181.102,
        15.875,
        9.525
      ],
      "axes": [
        1,
        0,
        2
      ],
      "grainAxis": 1,
      "notes": ""
    },
    {
      "id": "CRF",
      "name": "R F corner cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        257.302,
        9.525,
        9.525
      ],
      "roughMm": [
        263.65200000000004,
        15.875,
        9.525
      ],
      "axes": [
        2,
        0,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "CRK",
      "name": "R K corner cleat",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        257.302,
        9.525,
        9.525
      ],
      "roughMm": [
        263.65200000000004,
        15.875,
        9.525
      ],
      "axes": [
        2,
        0,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "A01",
      "name": "Floor splash panel",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        256.54,
        154.94,
        3.0
      ],
      "roughMm": [
        262.89000000000004,
        161.29,
        3.0
      ],
      "axes": [
        0,
        1,
        2
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "A02",
      "name": "Back splash panel",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        256.54,
        256.54,
        3.0
      ],
      "roughMm": [
        262.89000000000004,
        262.89000000000004,
        3.0
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "AL",
      "name": "Side splash panel L",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        256.54,
        154.94,
        3.0
      ],
      "roughMm": [
        262.89000000000004,
        161.29,
        3.0
      ],
      "axes": [
        2,
        1,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "ML1",
      "name": "Fine mesh L1",
      "material": "mesh",
      "quantity": 1,
      "finishedMm": [
        144.78,
        43.18,
        0.4572
      ],
      "roughMm": [
        151.13,
        49.53,
        0.4572
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "RL1",
      "name": "Vent retaining ring L1",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        149.86,
        48.26,
        3.0
      ],
      "roughMm": [
        156.21,
        54.61,
        3.0
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "ML2",
      "name": "Fine mesh L2",
      "material": "mesh",
      "quantity": 1,
      "finishedMm": [
        144.78,
        43.18,
        0.4572
      ],
      "roughMm": [
        151.13,
        49.53,
        0.4572
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "RL2",
      "name": "Vent retaining ring L2",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        149.86,
        48.26,
        3.0
      ],
      "roughMm": [
        156.21,
        54.61,
        3.0
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "AR",
      "name": "Side splash panel R",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        256.54,
        154.94,
        3.0
      ],
      "roughMm": [
        262.89000000000004,
        161.29,
        3.0
      ],
      "axes": [
        2,
        1,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "MR1",
      "name": "Fine mesh R1",
      "material": "mesh",
      "quantity": 1,
      "finishedMm": [
        144.78,
        43.18,
        0.4572
      ],
      "roughMm": [
        151.13,
        49.53,
        0.4572
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "RR1",
      "name": "Vent retaining ring R1",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        149.86,
        48.26,
        3.0
      ],
      "roughMm": [
        156.21,
        54.61,
        3.0
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "MR2",
      "name": "Fine mesh R2",
      "material": "mesh",
      "quantity": 1,
      "finishedMm": [
        144.78,
        43.18,
        0.4572
      ],
      "roughMm": [
        151.13,
        49.53,
        0.4572
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "RR2",
      "name": "Vent retaining ring R2",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        149.86,
        48.26,
        3.0
      ],
      "roughMm": [
        156.21,
        54.61,
        3.0
      ],
      "axes": [
        1,
        2,
        0
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "A03",
      "name": "Fixed roof pane",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        228.6,
        127.0,
        3.0
      ],
      "roughMm": [
        234.95,
        133.35,
        3.0
      ],
      "axes": [
        0,
        1,
        2
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "A04",
      "name": "Fixed transom pane",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        269.24,
        48.26,
        3.0
      ],
      "roughMm": [
        275.59000000000003,
        54.61,
        3.0
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "A05",
      "name": "Door glazing and seal face",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        250.952,
        206.502,
        3.0
      ],
      "roughMm": [
        257.302,
        212.852,
        3.0
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "G01",
      "name": "One-piece door seal",
      "material": "gasket",
      "quantity": 1,
      "finishedMm": [
        246.38,
        201.93,
        1.6002
      ],
      "roughMm": [
        252.73,
        208.28,
        1.6002
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Nominal 25% compression; set support from measured free ring thickness; supplier die-cut tolerance held"
    },
    {
      "id": "A06",
      "name": "Adjustable continuous door stop",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        271.78,
        227.33,
        3.0
      ],
      "roughMm": [
        278.13,
        233.68,
        3.0
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Stand-off spacers must be individually measured and fitted; do not fix to nominal position"
    },
    {
      "id": "DCL1",
      "name": "Door glazing keeper 1",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        243.84,
        6.35,
        3.0
      ],
      "roughMm": [
        250.19,
        12.7,
        3.0
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "DCL2",
      "name": "Door glazing keeper 2",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        243.84,
        6.35,
        3.0
      ],
      "roughMm": [
        250.19,
        12.7,
        3.0
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "DCL3",
      "name": "Door glazing keeper 3",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        189.23,
        6.35,
        3.0
      ],
      "roughMm": [
        195.57999999999998,
        12.7,
        3.0
      ],
      "axes": [
        2,
        0,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "DCL4",
      "name": "Door glazing keeper 4",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        189.23,
        6.35,
        3.0
      ],
      "roughMm": [
        195.57999999999998,
        12.7,
        3.0
      ],
      "axes": [
        2,
        0,
        1
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "K1",
      "name": "Roof pane keeper K1",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        127.0,
        12.7,
        3.0
      ],
      "roughMm": [
        133.35,
        19.049999999999997,
        3.0
      ],
      "axes": [
        1,
        0,
        2
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "K2",
      "name": "Roof pane keeper K2",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        127.0,
        12.7,
        3.0
      ],
      "roughMm": [
        133.35,
        19.049999999999997,
        3.0
      ],
      "axes": [
        1,
        0,
        2
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "K3",
      "name": "Roof pane keeper K3",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        203.2,
        12.7,
        3.0
      ],
      "roughMm": [
        209.54999999999998,
        19.049999999999997,
        3.0
      ],
      "axes": [
        0,
        1,
        2
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "K4",
      "name": "Roof pane keeper K4",
      "material": "acrylic",
      "quantity": 1,
      "finishedMm": [
        203.2,
        12.7,
        3.0
      ],
      "roughMm": [
        209.54999999999998,
        19.049999999999997,
        3.0
      ],
      "axes": [
        0,
        1,
        2
      ],
      "grainAxis": 2,
      "notes": ""
    },
    {
      "id": "SP0",
      "name": "Measured door-stop spacer DS0",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP1",
      "name": "Measured door-stop spacer DS1",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP2",
      "name": "Measured door-stop spacer DS2",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP3",
      "name": "Measured door-stop spacer DS3",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP4",
      "name": "Measured door-stop spacer DS4",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP5",
      "name": "Measured door-stop spacer DS5",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP6",
      "name": "Measured door-stop spacer DS6",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP7",
      "name": "Measured door-stop spacer DS7",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP8",
      "name": "Measured door-stop spacer DS8",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    },
    {
      "id": "SP9",
      "name": "Measured door-stop spacer DS9",
      "material": "hardwood",
      "quantity": 1,
      "finishedMm": [
        6.35,
        6.35,
        4.32715
      ],
      "roughMm": [
        12.7,
        12.7,
        4.32715
      ],
      "axes": [
        0,
        2,
        1
      ],
      "grainAxis": 2,
      "notes": "Reference spacer only. Plane oversize hardwood spacer to measured compressed seal gap, seal and fully cure before use; clearance drill through centre"
    }
  ],
  "layouts": [
    {
      "id": "PLY",
      "material": "plywood",
      "sizeMm": [
        1219.2,
        609.6,
        12.7
      ],
      "count": 1,
      "kerfMm": 3.175,
      "trimMm": 6.35,
      "pieces": [
        {
          "id": "P05",
          "x": 6.35,
          "y": 6.35,
          "w": 284.226,
          "h": 284.226
        },
        {
          "id": "P06",
          "x": 293.75100000000003,
          "y": 6.35,
          "w": 284.226,
          "h": 284.226
        },
        {
          "id": "P07",
          "x": 581.152,
          "y": 6.35,
          "w": 255.778,
          "h": 211.328
        },
        {
          "id": "P01",
          "x": 840.105,
          "y": 6.35,
          "w": 309.62600000000003,
          "h": 208.02599999999998
        },
        {
          "id": "P02",
          "x": 6.35,
          "y": 293.75100000000003,
          "w": 309.62600000000003,
          "h": 208.02599999999998
        },
        {
          "id": "P03",
          "x": 319.15100000000007,
          "y": 293.75100000000003,
          "w": 284.226,
          "h": 208.02599999999998
        },
        {
          "id": "P04",
          "x": 606.5520000000001,
          "y": 293.75100000000003,
          "w": 284.226,
          "h": 208.02599999999998
        }
      ]
    },
    {
      "id": "ACR",
      "material": "acrylic",
      "sizeMm": [
        1219.2,
        609.6,
        3
      ],
      "count": 1,
      "kerfMm": 3.175,
      "trimMm": 6.35,
      "pieces": [
        {
          "id": "A02",
          "x": 6.35,
          "y": 6.35,
          "w": 262.89000000000004,
          "h": 262.89000000000004
        },
        {
          "id": "A06",
          "x": 272.4150000000001,
          "y": 6.35,
          "w": 278.13,
          "h": 233.68
        },
        {
          "id": "A05",
          "x": 553.72,
          "y": 6.35,
          "w": 257.302,
          "h": 212.852
        },
        {
          "id": "A01",
          "x": 814.1970000000001,
          "y": 6.35,
          "w": 262.89000000000004,
          "h": 161.29
        },
        {
          "id": "AL",
          "x": 6.35,
          "y": 272.4150000000001,
          "w": 262.89000000000004,
          "h": 161.29
        },
        {
          "id": "AR",
          "x": 272.4150000000001,
          "y": 272.4150000000001,
          "w": 262.89000000000004,
          "h": 161.29
        },
        {
          "id": "A03",
          "x": 538.4800000000001,
          "y": 272.4150000000001,
          "w": 234.95,
          "h": 133.35
        },
        {
          "id": "RL1",
          "x": 776.6050000000001,
          "y": 272.4150000000001,
          "w": 156.21,
          "h": 54.61
        },
        {
          "id": "RL2",
          "x": 935.9900000000001,
          "y": 272.4150000000001,
          "w": 156.21,
          "h": 54.61
        },
        {
          "id": "RR1",
          "x": 6.35,
          "y": 436.8800000000001,
          "w": 156.21,
          "h": 54.61
        },
        {
          "id": "RR2",
          "x": 165.735,
          "y": 436.8800000000001,
          "w": 156.21,
          "h": 54.61
        },
        {
          "id": "A04",
          "x": 325.12,
          "y": 436.8800000000001,
          "w": 275.59000000000003,
          "h": 54.61
        },
        {
          "id": "K1",
          "x": 603.885,
          "y": 436.8800000000001,
          "w": 133.35,
          "h": 19.049999999999997
        },
        {
          "id": "K2",
          "x": 740.41,
          "y": 436.8800000000001,
          "w": 133.35,
          "h": 19.049999999999997
        },
        {
          "id": "K3",
          "x": 876.935,
          "y": 436.8800000000001,
          "w": 209.54999999999998,
          "h": 19.049999999999997
        },
        {
          "id": "K4",
          "x": 6.35,
          "y": 494.6650000000001,
          "w": 209.54999999999998,
          "h": 19.049999999999997
        },
        {
          "id": "DCL1",
          "x": 219.075,
          "y": 494.6650000000001,
          "w": 250.19,
          "h": 12.7
        },
        {
          "id": "DCL2",
          "x": 472.44,
          "y": 494.6650000000001,
          "w": 250.19,
          "h": 12.7
        },
        {
          "id": "DCL3",
          "x": 725.8050000000001,
          "y": 494.6650000000001,
          "w": 195.57999999999998,
          "h": 12.7
        },
        {
          "id": "DCL4",
          "x": 924.5600000000001,
          "y": 494.6650000000001,
          "w": 195.57999999999998,
          "h": 12.7
        }
      ]
    },
    {
      "id": "MESH",
      "material": "mesh",
      "sizeMm": [
        609.6,
        304.8,
        0.4572
      ],
      "count": 1,
      "kerfMm": 3,
      "trimMm": 6.35,
      "pieces": [
        {
          "id": "ML1",
          "x": 6.35,
          "y": 6.35,
          "w": 151.13,
          "h": 49.53
        },
        {
          "id": "ML2",
          "x": 160.48,
          "y": 6.35,
          "w": 151.13,
          "h": 49.53
        },
        {
          "id": "MR1",
          "x": 314.61,
          "y": 6.35,
          "w": 151.13,
          "h": 49.53
        },
        {
          "id": "MR2",
          "x": 6.35,
          "y": 58.88,
          "w": 151.13,
          "h": 49.53
        }
      ]
    },
    {
      "id": "VENEER",
      "material": "veneer",
      "sizeMm": [
        1219.2,
        2438.4,
        0.762
      ],
      "count": 1,
      "kerfMm": 3.175,
      "trimMm": 6.35,
      "pieces": [
        {
          "id": "P03-face-1",
          "x": 6.35,
          "y": 6.35,
          "w": 209.54999999999998,
          "h": 285.75
        },
        {
          "id": "P03-face-2",
          "x": 219.075,
          "y": 6.35,
          "w": 209.54999999999998,
          "h": 285.75
        },
        {
          "id": "P04-face-1",
          "x": 431.79999999999995,
          "y": 6.35,
          "w": 209.54999999999998,
          "h": 285.75
        },
        {
          "id": "P04-face-2",
          "x": 644.525,
          "y": 6.35,
          "w": 209.54999999999998,
          "h": 285.75
        },
        {
          "id": "P05-face-1",
          "x": 857.25,
          "y": 6.35,
          "w": 285.75,
          "h": 285.75
        },
        {
          "id": "P05-face-2",
          "x": 6.35,
          "y": 295.27500000000003,
          "w": 285.75,
          "h": 285.75
        },
        {
          "id": "P06-face-1",
          "x": 295.27500000000003,
          "y": 295.27500000000003,
          "w": 285.75,
          "h": 285.75
        },
        {
          "id": "P06-face-2",
          "x": 584.2,
          "y": 295.27500000000003,
          "w": 285.75,
          "h": 285.75
        },
        {
          "id": "P07-face-1",
          "x": 873.125,
          "y": 295.27500000000003,
          "w": 257.302,
          "h": 212.852
        },
        {
          "id": "P07-face-2",
          "x": 6.35,
          "y": 584.2,
          "w": 257.302,
          "h": 212.852
        },
        {
          "id": "P01-face-1",
          "x": 266.82700000000006,
          "y": 584.2,
          "w": 311.15000000000003,
          "h": 209.54999999999998
        },
        {
          "id": "P01-face-2",
          "x": 581.152,
          "y": 584.2,
          "w": 311.15000000000003,
          "h": 209.54999999999998
        },
        {
          "id": "P02-face-1",
          "x": 895.4770000000001,
          "y": 584.2,
          "w": 311.15000000000003,
          "h": 209.54999999999998
        },
        {
          "id": "P02-face-2",
          "x": 6.35,
          "y": 800.2270000000001,
          "w": 311.15000000000003,
          "h": 209.54999999999998
        },
        {
          "id": "P01-edge-0-0",
          "x": 320.67500000000007,
          "y": 800.2270000000001,
          "w": 311.15000000000003,
          "h": 20.573999999999998
        },
        {
          "id": "P01-edge-0-1",
          "x": 635.0000000000001,
          "y": 800.2270000000001,
          "w": 311.15000000000003,
          "h": 20.573999999999998
        },
        {
          "id": "P01-edge-1-0",
          "x": 949.3250000000002,
          "y": 800.2270000000001,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P01-edge-1-1",
          "x": 6.35,
          "y": 1012.9520000000001,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P02-edge-0-0",
          "x": 219.075,
          "y": 1012.9520000000001,
          "w": 311.15000000000003,
          "h": 20.573999999999998
        },
        {
          "id": "P02-edge-0-1",
          "x": 533.4000000000001,
          "y": 1012.9520000000001,
          "w": 311.15000000000003,
          "h": 20.573999999999998
        },
        {
          "id": "P02-edge-1-0",
          "x": 847.7250000000001,
          "y": 1012.9520000000001,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P02-edge-1-1",
          "x": 6.35,
          "y": 1036.701,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P02-reveal-0-0-0",
          "x": 219.075,
          "y": 1036.701,
          "w": 211.07399999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P02-reveal-0-0-1",
          "x": 433.32399999999996,
          "y": 1036.701,
          "w": 211.07399999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P02-reveal-0-1-0",
          "x": 647.573,
          "y": 1036.701,
          "w": 109.47399999999999,
          "h": 20.573999999999998
        },
        {
          "id": "P02-reveal-0-1-1",
          "x": 760.222,
          "y": 1036.701,
          "w": 109.47399999999999,
          "h": 20.573999999999998
        },
        {
          "id": "P03-edge-1-0",
          "x": 872.871,
          "y": 1036.701,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P03-edge-1-1",
          "x": 6.35,
          "y": 1060.45,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P03-edge-2-0",
          "x": 219.075,
          "y": 1060.45,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P03-edge-2-1",
          "x": 508.0,
          "y": 1060.45,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-0-1-0",
          "x": 796.925,
          "y": 1060.45,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-0-1-1",
          "x": 934.9739999999999,
          "y": 1060.45,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-0-2-0",
          "x": 1073.023,
          "y": 1060.45,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-0-2-1",
          "x": 1109.472,
          "y": 1060.45,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-1-1-0",
          "x": 6.35,
          "y": 1084.199,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-1-1-1",
          "x": 144.399,
          "y": 1084.199,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-1-2-0",
          "x": 282.448,
          "y": 1084.199,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P03-reveal-1-2-1",
          "x": 318.897,
          "y": 1084.199,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P04-edge-1-0",
          "x": 355.346,
          "y": 1084.199,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P04-edge-1-1",
          "x": 568.071,
          "y": 1084.199,
          "w": 209.54999999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P04-edge-2-0",
          "x": 780.796,
          "y": 1084.199,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P04-edge-2-1",
          "x": 6.35,
          "y": 1107.948,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-0-1-0",
          "x": 295.27500000000003,
          "y": 1107.948,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-0-1-1",
          "x": 433.32400000000007,
          "y": 1107.948,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-0-2-0",
          "x": 571.373,
          "y": 1107.948,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-0-2-1",
          "x": 607.822,
          "y": 1107.948,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-1-1-0",
          "x": 644.271,
          "y": 1107.948,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-1-1-1",
          "x": 782.3199999999999,
          "y": 1107.948,
          "w": 134.874,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-1-2-0",
          "x": 920.3689999999999,
          "y": 1107.948,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P04-reveal-1-2-1",
          "x": 956.8179999999999,
          "y": 1107.948,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P05-edge-0-0",
          "x": 6.35,
          "y": 1131.6970000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P05-edge-0-1",
          "x": 295.27500000000003,
          "y": 1131.6970000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P05-edge-2-0",
          "x": 584.2,
          "y": 1131.6970000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P05-edge-2-1",
          "x": 873.125,
          "y": 1131.6970000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P06-edge-0-0",
          "x": 6.35,
          "y": 1155.4460000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P06-edge-0-1",
          "x": 295.27500000000003,
          "y": 1155.4460000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P06-edge-2-0",
          "x": 584.2,
          "y": 1155.4460000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P06-edge-2-1",
          "x": 873.125,
          "y": 1155.4460000000001,
          "w": 285.75,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-0-0-0",
          "x": 6.35,
          "y": 1179.1950000000002,
          "w": 261.874,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-0-0-1",
          "x": 271.39900000000006,
          "y": 1179.1950000000002,
          "w": 261.874,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-0-2-0",
          "x": 536.4480000000001,
          "y": 1179.1950000000002,
          "w": 217.424,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-0-2-1",
          "x": 757.0470000000001,
          "y": 1179.1950000000002,
          "w": 217.424,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-1-0-0",
          "x": 6.35,
          "y": 1202.9440000000002,
          "w": 261.874,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-1-0-1",
          "x": 271.39900000000006,
          "y": 1202.9440000000002,
          "w": 261.874,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-1-2-0",
          "x": 536.4480000000001,
          "y": 1202.9440000000002,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P06-reveal-1-2-1",
          "x": 572.897,
          "y": 1202.9440000000002,
          "w": 33.274,
          "h": 20.573999999999998
        },
        {
          "id": "P07-edge-0-0",
          "x": 609.346,
          "y": 1202.9440000000002,
          "w": 257.302,
          "h": 20.573999999999998
        },
        {
          "id": "P07-edge-0-1",
          "x": 869.8230000000001,
          "y": 1202.9440000000002,
          "w": 257.302,
          "h": 20.573999999999998
        },
        {
          "id": "P07-edge-2-0",
          "x": 6.35,
          "y": 1226.6930000000002,
          "w": 212.852,
          "h": 20.573999999999998
        },
        {
          "id": "P07-edge-2-1",
          "x": 222.377,
          "y": 1226.6930000000002,
          "w": 212.852,
          "h": 20.573999999999998
        },
        {
          "id": "P07-reveal-0-0-0",
          "x": 438.404,
          "y": 1226.6930000000002,
          "w": 208.02599999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P07-reveal-0-0-1",
          "x": 649.605,
          "y": 1226.6930000000002,
          "w": 208.02599999999998,
          "h": 20.573999999999998
        },
        {
          "id": "P07-reveal-0-2-0",
          "x": 860.806,
          "y": 1226.6930000000002,
          "w": 163.576,
          "h": 20.573999999999998
        },
        {
          "id": "P07-reveal-0-2-1",
          "x": 1027.557,
          "y": 1226.6930000000002,
          "w": 163.576,
          "h": 20.573999999999998
        }
      ]
    }
  ],
  "fasteners": [
    {
      "id": "F2",
      "name": "#2 \u00d7 3/8-inch flat-head brass, provisional hinge length",
      "installed": 12,
      "purchase": 16,
      "source": "Exact supplier SKU/point/head geometry held for receiving; do not substitute screw diameter silently"
    },
    {
      "id": "F4short",
      "name": "#4 \u00d7 3/8-inch stainless flat-head",
      "installed": 16,
      "purchase": 20,
      "source": "Exact supplier SKU/point/head geometry held for receiving; do not substitute screw diameter silently"
    },
    {
      "id": "F4med",
      "name": "#4 \u00d7 1/2-inch stainless, acrylic keeper",
      "installed": 44,
      "purchase": 51,
      "source": "Exact supplier SKU/point/head geometry held for receiving; do not substitute screw diameter silently"
    },
    {
      "id": "F4stop",
      "name": "#4 \u00d7 5/8-inch stainless, door-stop spacers",
      "installed": 10,
      "purchase": 14,
      "source": "Exact supplier SKU/point/head geometry held for receiving; do not substitute screw diameter silently"
    },
    {
      "id": "F4long",
      "name": "#4 \u00d7 3/4-inch stainless flat-head cleat screws",
      "installed": 48,
      "purchase": 56,
      "source": "Exact supplier SKU/point/head geometry held for receiving; do not substitute screw diameter silently"
    }
  ],
  "mesh": {
    "meshPerInch": 50,
    "wireMm": 0.2286,
    "apertureMm": 0.2794,
    "wovenStackMm": 0.4572,
    "openFraction": 0.3025,
    "grossVentAreaMm2": 12903.199999999999,
    "netNominalVentAreaMm2": 3903.2179999999994,
    "claim": "Nominal mesh calculation only. No universal escape threshold or ventilation performance proved."
  },
  "door": {
    "pivotIn": [
      1.03,
      -0.03,
      0
    ],
    "openDegrees": -100,
    "cosmeticRevealMm": 1.524,
    "sealFreeMm": 1.6002,
    "sealCompressedMm": 1.20015,
    "compressionTarget": 0.25,
    "stopFaceMm": 18.55115,
    "sealContactAreaIn2": 4.349999999999994,
    "forceRangeLbf": [
      4.349999999999994,
      21.74999999999997
    ],
    "note": "Force range uses datasheet compression-force specification as a screening estimate only; actual latch/mount strength and seal response require testing.",
    "backerReferenceMm": 0.127,
    "gasketAttachment": "Converter-laminated PSA backing, entirely under ring. Exact adhesive identity/compatibility/thickness and bond are H03/H05 holds. Reference envelope is not an adhesive product specification."
  },
  "limits": {
    "roofLoadKg": 0,
    "stacking": false,
    "wetTank": false,
    "carrying": "Empty only, support the base; not by door or roof",
    "shelf": "Level stable full-footprint support; anti-tip location out of children/pet reach",
    "internalContentsKg": 1,
    "contentsLoadStatus": "Design scenario only, not tested capacity"
  },
  "products": [
    {
      "id": "M01",
      "name": "50-mesh 316 stainless woven wire, RU50-009J",
      "url": "https://howardwire.com/products/316-ss-woven-50-mesh-009",
      "verified": "2026-10-16 manufacturer page",
      "facts": "0.009-inch wire; 0.011-inch nominal opening; 30% stated open area; cut-to-size quote offered",
      "limit": "No maximum aperture tolerance confirmed; request certificate and inspect received sheet. No order placed."
    },
    {
      "id": "H01",
      "name": "Lee Valley 00D0103 extra-narrow brass butt hinges, pair",
      "url": "https://www.leevalley.com/en-us/shop/hardware/hinges/cabinet-door/40468-extruded-brass-x-narrow-butt-hinges",
      "verified": "2026-10-16 seller/manufacturer product page",
      "facts": "1 1/2 \u00d7 3/4 inches open; fixed pin; requires #2 screws, not supplied",
      "limit": "Leaf thickness, pin axis, screw count/centres and opening geometry require received template. Model is an envelope."
    },
    {
      "id": "H02",
      "name": "Sugatsune SCC25 draw latch",
      "url": "https://www.sugatsune.com/draw-latch-scc25/",
      "drawing": "https://www.sugatsune.com/content/site-assets/501_PDF/PS_P_PS35_SCC25.pdf",
      "verified": "2026-10-16 product page and PDF visually inspected",
      "facts": "304 stainless; 35 \u00d7 13.5 \u00d7 6.2 mm overall; body 23.5 mm; counterplate 7.6 mm; body hole spacing 11.5 mm, catch holes 8 mm apart; four 3.2 mm holes with 4.6 mm countersinks; #4 screws not included",
      "limit": "Drawing is at zero clamping force. Place catch using actual compressed gasket and latch, not the nominal drawing alone."
    },
    {
      "id": "G01",
      "name": "Rogers BISCO BF-1000 white silicone foam, custom one-piece ring with converter-applied PSA backing",
      "url": "https://www.rogerscorp.com/elastomeric-material-solutions/bisco-silicones/bisco-bf-1000-extra-soft-silicone-foam",
      "drawing": "https://www.stockwell.com/data-sheets/bf1000.pdf",
      "verified": "2026-10-16 manufacturer datasheet via converter",
      "facts": "0.063-inch minimum nominal thickness \u00b10.020 inch; compression force deflection 1\u20135 psi specification, 2.4 psi typical; converter cut dimensions require quotation",
      "limit": "Exact backing adhesive identity, compatibility, bond method and thickness remain H03/H05. Backing must be fully covered by the ring, with no loose/exposed adhesive edge. The 0.005-inch backing model is a planning envelope only. Not an animal-contact approval."
    },
    {
      "id": "S01",
      "name": "ASI 509 Aquarium Sealant, clear",
      "url": "https://meridianadhesives.com/products/asi-509-aquarium-sealant/",
      "drawing": "https://americansealantsinc.com/wp-content/uploads/2023/09/ASI-Aquarium-Sealant-TDS.pdf",
      "verified": "2026-10-16 manufacturer TDS",
      "facts": "Seven days before adhesion/strength testing; confinement/cold/dry conditions can lengthen cure; substrates must be tested",
      "limit": "Nonstructural perimeter seal only. Aquarium claim is not species-specific approval. Use plastic supplier-compatible cleaners; do not expose acrylic to acetone."
    },
    {
      "id": "V01",
      "name": "Oakwood flat-cut white oak with 3M PSA backer",
      "url": "https://oakwoodveneer.com/oak-veneer-white-flat-cut.html",
      "drawing": "https://oakwoodveneer.com/content/PSA_Veneer_Installation_Guide.pdf",
      "verified": "2026-10-16 current product and installation pages",
      "facts": "PSA option; porous substrate preseal; minimum 24-hour preseal dry interval; firm scraping pressure from centre along grain",
      "limit": "Confirm ordered backer, thickness and compatibility; total 0.030-inch face allowance in design is a measured-stack target, not a vendor specification. Balance both faces."
    },
    {
      "id": "A01",
      "name": "ACRYLITE clear cell-cast acrylic, nominal 3 mm",
      "url": "https://www.acrylite.co/resources/fabrication-manuals",
      "verified": "2026-10-16 manufacturer fabrication library",
      "facts": "Supplier fabrication/cleaning instructions must accompany the ordered grade",
      "limit": "Exact supplier grade, thickness tolerance and sealant compatibility remain receiving requirements. Custom cut order is not released."
    },
    {
      "id": "J01",
      "name": "Titebond III Ultimate wood glue",
      "url": "https://titebond.com/print/product/e8d40b45-0ab3-49f7-8a9c-b53970f736af",
      "guidance": "https://www.titebond.com/resources/use/all",
      "verified": "2026-10-16 manufacturer guidance",
      "facts": "Typical unstressed joint clamp 30\u201360 minutes; avoid stressing for at least 24 hours; use current label environmental/application limits",
      "limit": "Wood-to-wood uncoated glue lands only; not a structural load rating or immersion approval."
    },
    {
      "id": "F01",
      "name": "Varathane Ultimate water-based polyurethane, brush-on satin",
      "url": "https://www.rustoleum.com/product-catalog/consumer-brands/varathane/ultimate-polyurethane-water-based",
      "verified": "2026-10-16 manufacturer page",
      "facts": "Three brush coats recommended; recoat after two hours under label conditions",
      "limit": "Confirm exact SKU/current full-cure label before purchase. Full-cure duration not established by this page; H05 remains open. No shortcut based on odour or touch-dry condition."
    }
  ],
  "statuses": {
    "RESEARCHED": "candidate research recorded; H02/H05 product details open",
    "DIMENSIONALLY_CHECKED": "Bounded checks recorded separately in qa/numerical.json; received hardware and seal fit remain held",
    "CALCULATION_CHECKED": "Mesh/layout/nominal path calculations recorded in qa/numerical.json; no strength certification",
    "DIGITALLY_VALIDATED": "See model, browser and PDF receipts for exact coverage; no physical or animal-use inference",
    "PROTOTYPE_BUILT": "not performed",
    "PHYSICALLY_TESTED": "not performed",
    "QUALIFIED_REVIEW": "not performed",
    "PUBLISHED": "no; owner review first"
  },
  "holds": [
    "H01 stock/finish stack",
    "H02 received hardware geometry",
    "H03 continuous seal/compression and warping",
    "H04 received mesh and bypass",
    "H05 material compatibility and full cure",
    "H06 prototype fit/access/containment",
    "H07 empty commissioning and qualified species review"
  ],
  "veneerCuts": [
    {
      "id": "P01-face-1",
      "w": 311.15000000000003,
      "h": 209.54999999999998,
      "grainAxis": 1,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P01-face-2",
      "w": 311.15000000000003,
      "h": 209.54999999999998,
      "grainAxis": 1,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P01-edge-0-0",
      "w": 311.15000000000003,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P01-edge-0-1",
      "w": 311.15000000000003,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P01-edge-1-0",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P01-edge-1-1",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P02-face-1",
      "w": 311.15000000000003,
      "h": 209.54999999999998,
      "grainAxis": 0,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P02-face-2",
      "w": 311.15000000000003,
      "h": 209.54999999999998,
      "grainAxis": 0,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P02-edge-0-0",
      "w": 311.15000000000003,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P02-edge-0-1",
      "w": 311.15000000000003,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P02-edge-1-0",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P02-edge-1-1",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P02-reveal-0-0-0",
      "w": 211.07399999999998,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P02-reveal-0-0-1",
      "w": 211.07399999999998,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P02-reveal-0-1-0",
      "w": 109.47399999999999,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P02-reveal-0-1-1",
      "w": 109.47399999999999,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-face-1",
      "w": 209.54999999999998,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P03-face-2",
      "w": 209.54999999999998,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P03-edge-1-0",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P03-edge-1-1",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P03-edge-2-0",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P03-edge-2-1",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P03-reveal-0-1-0",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-reveal-0-1-1",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-reveal-0-2-0",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-reveal-0-2-1",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-reveal-1-1-0",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-reveal-1-1-1",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-reveal-1-2-0",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P03-reveal-1-2-1",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-face-1",
      "w": 209.54999999999998,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P04-face-2",
      "w": 209.54999999999998,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P04-edge-1-0",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P04-edge-1-1",
      "w": 209.54999999999998,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P04-edge-2-0",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P04-edge-2-1",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P04-reveal-0-1-0",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-reveal-0-1-1",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-reveal-0-2-0",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-reveal-0-2-1",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-reveal-1-1-0",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-reveal-1-1-1",
      "w": 134.874,
      "h": 20.573999999999998,
      "grainAxis": 1,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-reveal-1-2-0",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P04-reveal-1-2-1",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P05-face-1",
      "w": 285.75,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P05-face-2",
      "w": 285.75,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P05-edge-0-0",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P05-edge-0-1",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P05-edge-2-0",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P05-edge-2-1",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P06-face-1",
      "w": 285.75,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P06-face-2",
      "w": 285.75,
      "h": 285.75,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P06-edge-0-0",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P06-edge-0-1",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P06-edge-2-0",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P06-edge-2-1",
      "w": 285.75,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P06-reveal-0-0-0",
      "w": 261.874,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P06-reveal-0-0-1",
      "w": 261.874,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P06-reveal-0-2-0",
      "w": 217.424,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P06-reveal-0-2-1",
      "w": 217.424,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P06-reveal-1-0-0",
      "w": 261.874,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P06-reveal-1-0-1",
      "w": 261.874,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P06-reveal-1-2-0",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P06-reveal-1-2-1",
      "w": 33.274,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P07-face-1",
      "w": 257.302,
      "h": 212.852,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P07-face-2",
      "w": 257.302,
      "h": 212.852,
      "grainAxis": 2,
      "note": "Balance both faces; mask bare glue lands"
    },
    {
      "id": "P07-edge-0-0",
      "w": 257.302,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P07-edge-0-1",
      "w": 257.302,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P07-edge-2-0",
      "w": 212.852,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P07-edge-2-1",
      "w": 212.852,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Trim at joint; never bridge a seam"
    },
    {
      "id": "P07-reveal-0-0-0",
      "w": 208.02599999999998,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P07-reveal-0-0-1",
      "w": 208.02599999999998,
      "h": 20.573999999999998,
      "grainAxis": 0,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P07-reveal-0-2-0",
      "w": 163.576,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    },
    {
      "id": "P07-reveal-0-2-1",
      "w": 163.576,
      "h": 20.573999999999998,
      "grainAxis": 2,
      "note": "Matching strip on machined opening; trim flush"
    }
  ],
  "hardwoodPurchase": "Eight 5/8 \u00d7 3/8 \u00d7 24-inch rough straight-grain cleat blanks (15.875 \u00d7 9.525 \u00d7 609.6 mm), to finish at 3/8-inch square. Also buy one 1/2 \u00d7 1/4 \u00d7 24-inch spacer blank (12.7 \u00d7 6.35 \u00d7 609.6 mm); plane its thickness to the measured seal setup before separating spacers. These allowances cover the listed rough widths, 1/8-inch (3.175 mm) kerf and trials. Have a supplier prepare them or machine larger safely held stock; do not handhold tiny pieces."
}