{
  "buildId": "p03-02",
  "revision": "v5-candidate-01",
  "status": "Authorized serial V5 conversion; digital release validation in progress",
  "dimensions": [
    48.0,
    24.0,
    24.0
  ],
  "plywoodGauge": 0.703125,
  "plywoodPublishedThickness": 0.703,
  "adhesive": "Titebond III 1414, supplemental to mechanical fasteners; not for structural/load-bearing use or continuous submersion",
  "finish": "Varathane Triple Thick clear satin 284473; received-label application and full cure. Supplier acceptance for substrate, veneer, cleaning and exposure remains required; see operations and H06.",
  "parts": [
    {
      "id": "P01",
      "name": "Floor",
      "lo": [
        0,
        0,
        0
      ],
      "size": [
        48.0,
        24.0,
        0.703125
      ],
      "step": 11,
      "material": "plywood",
      "group": "body",
      "installStep": 11,
      "baselineLo": [
        0,
        0,
        0
      ],
      "baselineSize": [
        48.0,
        24.0,
        0.703125
      ],
      "baselineCut": "48\" × 24\" × 45/64\"",
      "stage": 11,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "P02",
      "name": "Roof",
      "lo": [
        0,
        0,
        23.296875
      ],
      "size": [
        48.0,
        24.0,
        0.703125
      ],
      "step": 16,
      "material": "plywood",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        0,
        0,
        23.296875
      ],
      "baselineSize": [
        48.0,
        24.0,
        0.703125
      ],
      "baselineCut": "48\" × 24\" × 45/64\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            4,
            6,
            23.196875
          ],
          "size": [
            18,
            12,
            0.903125
          ]
        },
        {
          "lo": [
            26,
            6,
            23.196875
          ],
          "size": [
            18,
            12,
            0.903125
          ]
        }
      ],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "P03L",
      "name": "Side panel L",
      "lo": [
        0,
        0,
        0.703125
      ],
      "size": [
        0.703125,
        24.0,
        22.59375
      ],
      "step": 12,
      "material": "plywood",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        0,
        0,
        0.703125
      ],
      "baselineSize": [
        0.703125,
        24.0,
        22.59375
      ],
      "baselineCut": "24\" × 22 19/32\" × 45/64\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            -0.1,
            7,
            4.703125
          ],
          "size": [
            0.903125,
            8,
            2
          ]
        }
      ],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "P03R",
      "name": "Side panel R",
      "lo": [
        47.296875,
        0,
        0.703125
      ],
      "size": [
        0.703125,
        24.0,
        22.59375
      ],
      "step": 12,
      "material": "plywood",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        47.296875,
        0,
        0.703125
      ],
      "baselineSize": [
        0.703125,
        24.0,
        22.59375
      ],
      "baselineCut": "24\" × 22 19/32\" × 45/64\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            47.196875,
            7,
            4.703125
          ],
          "size": [
            0.903125,
            8,
            2
          ]
        }
      ],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "P04",
      "name": "Back",
      "lo": [
        0.703125,
        23.296875,
        0.703125
      ],
      "size": [
        46.59375,
        0.703125,
        22.59375
      ],
      "step": 13,
      "material": "plywood",
      "group": "body",
      "installStep": 13,
      "baselineLo": [
        0.703125,
        23.296875,
        0.703125
      ],
      "baselineSize": [
        46.59375,
        0.703125,
        22.59375
      ],
      "baselineCut": "46 19/32\" × 22 19/32\" × 45/64\"",
      "stage": 13,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F0L",
      "name": "Front frame stile",
      "lo": [
        0.703125,
        0.0,
        0.703125
      ],
      "size": [
        2.5,
        0.75,
        22.59375
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        0.703125,
        0.0,
        0.703125
      ],
      "baselineSize": [
        2.5,
        0.75,
        22.59375
      ],
      "baselineCut": "22 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F0R",
      "name": "Front frame stile",
      "lo": [
        44.796875,
        0.0,
        0.703125
      ],
      "size": [
        2.5,
        0.75,
        22.59375
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        44.796875,
        0.0,
        0.703125
      ],
      "baselineSize": [
        2.5,
        0.75,
        22.59375
      ],
      "baselineCut": "22 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F0B",
      "name": "Front frame rail",
      "lo": [
        3.203125,
        0.0,
        0.703125
      ],
      "size": [
        41.59375,
        0.75,
        3.5
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        3.203125,
        0.0,
        0.703125
      ],
      "baselineSize": [
        41.59375,
        0.75,
        3.5
      ],
      "baselineCut": "41 19/32\" × 3 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F0T",
      "name": "Front frame rail",
      "lo": [
        3.203125,
        0.0,
        20.796875
      ],
      "size": [
        41.59375,
        0.75,
        2.5
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        3.203125,
        0.0,
        20.796875
      ],
      "baselineSize": [
        41.59375,
        0.75,
        2.5
      ],
      "baselineCut": "41 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F0C",
      "name": "Centre stile",
      "lo": [
        22.75,
        0.0,
        4.203125
      ],
      "size": [
        2.5,
        0.75,
        16.59375
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        22.75,
        0.0,
        4.203125
      ],
      "baselineSize": [
        2.5,
        0.75,
        16.59375
      ],
      "baselineCut": "16 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F1L",
      "name": "Front frame stile",
      "lo": [
        0.703125,
        0.75,
        4.203125
      ],
      "size": [
        2.5,
        0.75,
        16.59375
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        0.703125,
        0.75,
        4.203125
      ],
      "baselineSize": [
        2.5,
        0.75,
        16.59375
      ],
      "baselineCut": "16 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F1R",
      "name": "Front frame stile",
      "lo": [
        44.796875,
        0.75,
        4.203125
      ],
      "size": [
        2.5,
        0.75,
        16.59375
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        44.796875,
        0.75,
        4.203125
      ],
      "baselineSize": [
        2.5,
        0.75,
        16.59375
      ],
      "baselineCut": "16 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F1B",
      "name": "Front frame rail",
      "lo": [
        0.703125,
        0.75,
        0.703125
      ],
      "size": [
        46.59375,
        0.75,
        3.5
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        0.703125,
        0.75,
        0.703125
      ],
      "baselineSize": [
        46.59375,
        0.75,
        3.5
      ],
      "baselineCut": "46 19/32\" × 3 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F1T",
      "name": "Front frame rail",
      "lo": [
        0.703125,
        0.75,
        20.796875
      ],
      "size": [
        46.59375,
        0.75,
        2.5
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        0.703125,
        0.75,
        20.796875
      ],
      "baselineSize": [
        46.59375,
        0.75,
        2.5
      ],
      "baselineCut": "46 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "F1C",
      "name": "Centre stile",
      "lo": [
        22.75,
        0.75,
        4.203125
      ],
      "size": [
        2.5,
        0.75,
        16.59375
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "installStep": 14,
      "baselineLo": [
        22.75,
        0.75,
        4.203125
      ],
      "baselineSize": [
        2.5,
        0.75,
        16.59375
      ],
      "baselineCut": "16 19/32\" × 2 1/2\" × 3/4\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "DL0H",
      "name": "Door stile lamina",
      "lo": [
        3.390625,
        0.0,
        4.390625
      ],
      "size": [
        1.6875,
        0.75,
        16.21875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        3.328125,
        0.0,
        4.328125
      ],
      "baselineSize": [
        1.75,
        0.75,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DL0J",
      "name": "Door stile lamina",
      "lo": [
        20.625,
        0.0,
        4.390625
      ],
      "size": [
        1.96875,
        0.75,
        16.21875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        20.625,
        0.0,
        4.328125
      ],
      "baselineSize": [
        2,
        0.75,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 2\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DL0B",
      "name": "Door rail lamina",
      "lo": [
        5.078125,
        0.0,
        4.390625
      ],
      "size": [
        15.546875,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        5.078125,
        0.0,
        4.328125
      ],
      "baselineSize": [
        15.546875,
        0.75,
        1.75
      ],
      "baselineCut": "15 35/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DL0T",
      "name": "Door rail lamina",
      "lo": [
        5.078125,
        0.0,
        18.921875
      ],
      "size": [
        15.546875,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        5.078125,
        0.0,
        18.921875
      ],
      "baselineSize": [
        15.546875,
        0.75,
        1.75
      ],
      "baselineCut": "15 35/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DL1H",
      "name": "Door stile lamina",
      "lo": [
        3.390625,
        0.75,
        6.078125
      ],
      "size": [
        1.6875,
        0.75,
        12.84375
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        3.328125,
        0.75,
        6.078125
      ],
      "baselineSize": [
        1.75,
        0.75,
        12.84375
      ],
      "baselineCut": "12 27/32\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DL1J",
      "name": "Door stile lamina",
      "lo": [
        20.625,
        0.75,
        6.078125
      ],
      "size": [
        1.96875,
        0.75,
        12.84375
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        20.625,
        0.75,
        6.078125
      ],
      "baselineSize": [
        2,
        0.75,
        12.84375
      ],
      "baselineCut": "12 27/32\" × 2\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DL1B",
      "name": "Door rail lamina",
      "lo": [
        3.390625,
        0.75,
        4.390625
      ],
      "size": [
        19.203125,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        3.328125,
        0.75,
        4.328125
      ],
      "baselineSize": [
        19.296875,
        0.75,
        1.75
      ],
      "baselineCut": "19 19/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DL1T",
      "name": "Door rail lamina",
      "lo": [
        3.390625,
        0.75,
        18.921875
      ],
      "size": [
        19.203125,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorL",
      "installStep": 17,
      "baselineLo": [
        3.328125,
        0.75,
        18.921875
      ],
      "baselineSize": [
        19.296875,
        0.75,
        1.75
      ],
      "baselineCut": "19 19/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 22.59375,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "AL",
      "name": "Captured acrylic pane",
      "lo": [
        4.703125,
        1.5625,
        5.703125
      ],
      "size": [
        16.296875,
        0.22,
        13.59375
      ],
      "step": 19,
      "material": "acrylic",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.703125,
        1.5625,
        5.703125
      ],
      "baselineSize": [
        16.296875,
        0.22,
        13.59375
      ],
      "baselineCut": "16 19/64\" × 13 19/32\" × .220\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GLL",
      "name": "Glazing spacer",
      "lo": [
        4.078125,
        1.5,
        5.078125
      ],
      "size": [
        0.5,
        0.34375,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.078125,
        1.5,
        5.078125
      ],
      "baselineSize": [
        0.5,
        0.34375,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GLR",
      "name": "Glazing spacer",
      "lo": [
        21.125,
        1.5,
        5.078125
      ],
      "size": [
        0.5,
        0.34375,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        21.125,
        1.5,
        5.078125
      ],
      "baselineSize": [
        0.5,
        0.34375,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GLB",
      "name": "Glazing spacer",
      "lo": [
        4.578125,
        1.5,
        5.078125
      ],
      "size": [
        16.546875,
        0.34375,
        0.5
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.578125,
        1.5,
        5.078125
      ],
      "baselineSize": [
        16.546875,
        0.34375,
        0.5
      ],
      "baselineCut": "16 35/64\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GLT",
      "name": "Glazing spacer",
      "lo": [
        4.578125,
        1.5,
        19.421875
      ],
      "size": [
        16.546875,
        0.34375,
        0.5
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.578125,
        1.5,
        19.421875
      ],
      "baselineSize": [
        16.546875,
        0.34375,
        0.5
      ],
      "baselineCut": "16 35/64\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KLL",
      "name": "Glazing cap",
      "lo": [
        4.078125,
        1.84375,
        5.078125
      ],
      "size": [
        0.875,
        0.25,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.078125,
        1.84375,
        5.078125
      ],
      "baselineSize": [
        0.875,
        0.25,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KLR",
      "name": "Glazing cap",
      "lo": [
        20.75,
        1.84375,
        5.078125
      ],
      "size": [
        0.875,
        0.25,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        20.75,
        1.84375,
        5.078125
      ],
      "baselineSize": [
        0.875,
        0.25,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KLB",
      "name": "Glazing cap",
      "lo": [
        4.953125,
        1.84375,
        5.078125
      ],
      "size": [
        15.796875,
        0.25,
        0.875
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.953125,
        1.84375,
        5.078125
      ],
      "baselineSize": [
        15.796875,
        0.25,
        0.875
      ],
      "baselineCut": "15 51/64\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KLT",
      "name": "Glazing cap",
      "lo": [
        4.953125,
        1.84375,
        19.046875
      ],
      "size": [
        15.796875,
        0.25,
        0.875
      ],
      "step": 19,
      "material": "pine",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.953125,
        1.84375,
        19.046875
      ],
      "baselineSize": [
        15.796875,
        0.25,
        0.875
      ],
      "baselineCut": "15 51/64\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLfB",
      "name": "Neoprene face pad",
      "lo": [
        4.703125,
        1.5,
        5.703125
      ],
      "size": [
        16.296875,
        0.0625,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.703125,
        1.5,
        5.703125
      ],
      "baselineSize": [
        16.296875,
        0.0625,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLfT",
      "name": "Neoprene face pad",
      "lo": [
        4.703125,
        1.5,
        19.046875
      ],
      "size": [
        16.296875,
        0.0625,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.703125,
        1.5,
        19.046875
      ],
      "baselineSize": [
        16.296875,
        0.0625,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLfL",
      "name": "Neoprene face pad",
      "lo": [
        4.703125,
        1.5,
        5.953125
      ],
      "size": [
        0.25,
        0.0625,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.703125,
        1.5,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.0625,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLfR",
      "name": "Neoprene face pad",
      "lo": [
        20.75,
        1.5,
        5.953125
      ],
      "size": [
        0.25,
        0.0625,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        20.75,
        1.5,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.0625,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLrB",
      "name": "Neoprene face pad",
      "lo": [
        4.703125,
        1.7825,
        5.703125
      ],
      "size": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.703125,
        1.7825,
        5.703125
      ],
      "baselineSize": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLrT",
      "name": "Neoprene face pad",
      "lo": [
        4.703125,
        1.7825,
        19.046875
      ],
      "size": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.703125,
        1.7825,
        19.046875
      ],
      "baselineSize": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLrL",
      "name": "Neoprene face pad",
      "lo": [
        4.703125,
        1.7825,
        5.953125
      ],
      "size": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        4.703125,
        1.7825,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADLrR",
      "name": "Neoprene face pad",
      "lo": [
        20.75,
        1.7825,
        5.953125
      ],
      "size": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorL",
      "installStep": 19,
      "baselineLo": [
        20.75,
        1.7825,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0left",
      "name": "1798A21 surface leaf",
      "lo": [
        2.015625,
        -0.20500000000000002,
        5.328125
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        2.015625,
        -0.08,
        5.328125
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0right",
      "name": "1798A21 surface leaf",
      "lo": [
        3.453125,
        -0.20500000000000002,
        5.328125
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "doorL",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.453125,
        -0.08,
        5.328125
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0K0",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        5.328125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        5.328125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0K1",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        5.928125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorL",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        5.928125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0K2",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        6.528125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        6.528125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0K3",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        7.128125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorL",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        7.128125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0K4",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        7.728125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        7.728125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL0PIN",
      "name": "Removable hinge pin",
      "lo": [
        3.140625,
        -0.4375,
        5.298125
      ],
      "size": [
        0.25,
        0.25,
        3.13
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "pin",
      "removablePin": true,
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.140625,
        -0.3125,
        5.298125
      ],
      "baselineSize": [
        0.25,
        0.25,
        3.13
      ],
      "baselineCut": "3 13/100\" × 1/4\" × 1/4\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1left",
      "name": "1798A21 surface leaf",
      "lo": [
        2.015625,
        -0.20500000000000002,
        16.671875
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        2.015625,
        -0.08,
        16.671875
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1right",
      "name": "1798A21 surface leaf",
      "lo": [
        3.453125,
        -0.20500000000000002,
        16.671875
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "doorL",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.453125,
        -0.08,
        16.671875
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1K0",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        16.671875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        16.671875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1K1",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        17.271875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorL",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        17.271875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1K2",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        17.871875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        17.871875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1K3",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        18.471875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorL",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        18.471875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1K4",
      "name": "1798A21 hinge knuckle",
      "lo": [
        3.078125,
        -0.5,
        19.071875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.078125,
        -0.375,
        19.071875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HL1PIN",
      "name": "Removable hinge pin",
      "lo": [
        3.140625,
        -0.4375,
        16.641875
      ],
      "size": [
        0.25,
        0.25,
        3.13
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "pin",
      "removablePin": true,
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        3.140625,
        -0.3125,
        16.641875
      ],
      "baselineSize": [
        0.25,
        0.25,
        3.13
      ],
      "baselineCut": "3 13/100\" × 1/4\" × 1/4\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STLH",
      "name": "Door side stop",
      "lo": [
        2.828125,
        1.5,
        4.328125
      ],
      "size": [
        0.6875,
        0.375,
        16.34375
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        2.828125,
        1.5,
        4.328125
      ],
      "baselineSize": [
        0.6875,
        0.375,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STLJ",
      "name": "Door side stop",
      "lo": [
        22.4375,
        1.5,
        4.328125
      ],
      "size": [
        0.6875,
        0.375,
        16.34375
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        22.4375,
        1.5,
        4.328125
      ],
      "baselineSize": [
        0.6875,
        0.375,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STLB",
      "name": "Door horizontal stop",
      "lo": [
        4.078125,
        1.5,
        3.828125
      ],
      "size": [
        17.796875,
        0.375,
        0.6875
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        4.078125,
        1.5,
        3.828125
      ],
      "baselineSize": [
        17.796875,
        0.375,
        0.6875
      ],
      "baselineCut": "17 51/64\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STLT",
      "name": "Door horizontal stop",
      "lo": [
        4.078125,
        1.5,
        20.484375
      ],
      "size": [
        17.796875,
        0.375,
        0.6875
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        4.078125,
        1.5,
        20.484375
      ],
      "baselineSize": [
        17.796875,
        0.375,
        0.6875
      ],
      "baselineCut": "17 51/64\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "DR0H",
      "name": "Door stile lamina",
      "lo": [
        25.40625,
        0.0,
        4.390625
      ],
      "size": [
        1.96875,
        0.75,
        16.21875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        25.375,
        0.0,
        4.328125
      ],
      "baselineSize": [
        2,
        0.75,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 2\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DR0J",
      "name": "Door stile lamina",
      "lo": [
        42.921875,
        0.0,
        4.390625
      ],
      "size": [
        1.6875,
        0.75,
        16.21875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        42.921875,
        0.0,
        4.328125
      ],
      "baselineSize": [
        1.75,
        0.75,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DR0B",
      "name": "Door rail lamina",
      "lo": [
        27.375,
        0.0,
        4.390625
      ],
      "size": [
        15.546875,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        27.375,
        0.0,
        4.328125
      ],
      "baselineSize": [
        15.546875,
        0.75,
        1.75
      ],
      "baselineCut": "15 35/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DR0T",
      "name": "Door rail lamina",
      "lo": [
        27.375,
        0.0,
        18.921875
      ],
      "size": [
        15.546875,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        27.375,
        0.0,
        18.921875
      ],
      "baselineSize": [
        15.546875,
        0.75,
        1.75
      ],
      "baselineCut": "15 35/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DR1H",
      "name": "Door stile lamina",
      "lo": [
        25.40625,
        0.75,
        6.078125
      ],
      "size": [
        1.96875,
        0.75,
        12.84375
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        25.375,
        0.75,
        6.078125
      ],
      "baselineSize": [
        2,
        0.75,
        12.84375
      ],
      "baselineCut": "12 27/32\" × 2\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DR1J",
      "name": "Door stile lamina",
      "lo": [
        42.921875,
        0.75,
        6.078125
      ],
      "size": [
        1.6875,
        0.75,
        12.84375
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        42.921875,
        0.75,
        6.078125
      ],
      "baselineSize": [
        1.75,
        0.75,
        12.84375
      ],
      "baselineCut": "12 27/32\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DR1B",
      "name": "Door rail lamina",
      "lo": [
        25.40625,
        0.75,
        4.390625
      ],
      "size": [
        19.203125,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        25.375,
        0.75,
        4.328125
      ],
      "baselineSize": [
        19.296875,
        0.75,
        1.75
      ],
      "baselineCut": "19 19/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "DR1T",
      "name": "Door rail lamina",
      "lo": [
        25.40625,
        0.75,
        18.921875
      ],
      "size": [
        19.203125,
        0.75,
        1.6875
      ],
      "step": 17,
      "material": "pine",
      "group": "doorR",
      "installStep": 17,
      "baselineLo": [
        25.375,
        0.75,
        18.921875
      ],
      "baselineSize": [
        19.296875,
        0.75,
        1.75
      ],
      "baselineCut": "19 19/64\" × 1 3/4\" × 3/4\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern.",
      "bevel": {
        "edge": 25.40625,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "AR",
      "name": "Captured acrylic pane",
      "lo": [
        27.0,
        1.5625,
        5.703125
      ],
      "size": [
        16.296875,
        0.22,
        13.59375
      ],
      "step": 19,
      "material": "acrylic",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.0,
        1.5625,
        5.703125
      ],
      "baselineSize": [
        16.296875,
        0.22,
        13.59375
      ],
      "baselineCut": "16 19/64\" × 13 19/32\" × .220\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GRL",
      "name": "Glazing spacer",
      "lo": [
        26.375,
        1.5,
        5.078125
      ],
      "size": [
        0.5,
        0.34375,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        26.375,
        1.5,
        5.078125
      ],
      "baselineSize": [
        0.5,
        0.34375,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GRR",
      "name": "Glazing spacer",
      "lo": [
        43.421875,
        1.5,
        5.078125
      ],
      "size": [
        0.5,
        0.34375,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        43.421875,
        1.5,
        5.078125
      ],
      "baselineSize": [
        0.5,
        0.34375,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GRB",
      "name": "Glazing spacer",
      "lo": [
        26.875,
        1.5,
        5.078125
      ],
      "size": [
        16.546875,
        0.34375,
        0.5
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        26.875,
        1.5,
        5.078125
      ],
      "baselineSize": [
        16.546875,
        0.34375,
        0.5
      ],
      "baselineCut": "16 35/64\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "GRT",
      "name": "Glazing spacer",
      "lo": [
        26.875,
        1.5,
        19.421875
      ],
      "size": [
        16.546875,
        0.34375,
        0.5
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        26.875,
        1.5,
        19.421875
      ],
      "baselineSize": [
        16.546875,
        0.34375,
        0.5
      ],
      "baselineCut": "16 35/64\" × 1/2\" × 11/32\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KRL",
      "name": "Glazing cap",
      "lo": [
        26.375,
        1.84375,
        5.078125
      ],
      "size": [
        0.875,
        0.25,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        26.375,
        1.84375,
        5.078125
      ],
      "baselineSize": [
        0.875,
        0.25,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KRR",
      "name": "Glazing cap",
      "lo": [
        43.046875,
        1.84375,
        5.078125
      ],
      "size": [
        0.875,
        0.25,
        14.84375
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        43.046875,
        1.84375,
        5.078125
      ],
      "baselineSize": [
        0.875,
        0.25,
        14.84375
      ],
      "baselineCut": "14 27/32\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KRB",
      "name": "Glazing cap",
      "lo": [
        27.25,
        1.84375,
        5.078125
      ],
      "size": [
        15.796875,
        0.25,
        0.875
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.25,
        1.84375,
        5.078125
      ],
      "baselineSize": [
        15.796875,
        0.25,
        0.875
      ],
      "baselineCut": "15 51/64\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "KRT",
      "name": "Glazing cap",
      "lo": [
        27.25,
        1.84375,
        19.046875
      ],
      "size": [
        15.796875,
        0.25,
        0.875
      ],
      "step": 19,
      "material": "pine",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.25,
        1.84375,
        19.046875
      ],
      "baselineSize": [
        15.796875,
        0.25,
        0.875
      ],
      "baselineCut": "15 51/64\" × 7/8\" × 1/4\"",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRfB",
      "name": "Neoprene face pad",
      "lo": [
        27.0,
        1.5,
        5.703125
      ],
      "size": [
        16.296875,
        0.0625,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.0,
        1.5,
        5.703125
      ],
      "baselineSize": [
        16.296875,
        0.0625,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRfT",
      "name": "Neoprene face pad",
      "lo": [
        27.0,
        1.5,
        19.046875
      ],
      "size": [
        16.296875,
        0.0625,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.0,
        1.5,
        19.046875
      ],
      "baselineSize": [
        16.296875,
        0.0625,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRfL",
      "name": "Neoprene face pad",
      "lo": [
        27.0,
        1.5,
        5.953125
      ],
      "size": [
        0.25,
        0.0625,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.0,
        1.5,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.0625,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRfR",
      "name": "Neoprene face pad",
      "lo": [
        43.046875,
        1.5,
        5.953125
      ],
      "size": [
        0.25,
        0.0625,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        43.046875,
        1.5,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.0625,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRrB",
      "name": "Neoprene face pad",
      "lo": [
        27.0,
        1.7825,
        5.703125
      ],
      "size": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.0,
        1.7825,
        5.703125
      ],
      "baselineSize": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRrT",
      "name": "Neoprene face pad",
      "lo": [
        27.0,
        1.7825,
        19.046875
      ],
      "size": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.0,
        1.7825,
        19.046875
      ],
      "baselineSize": [
        16.296875,
        0.06125000000000003,
        0.25
      ],
      "baselineCut": "16 19/64\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRrL",
      "name": "Neoprene face pad",
      "lo": [
        27.0,
        1.7825,
        5.953125
      ],
      "size": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        27.0,
        1.7825,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "PADRrR",
      "name": "Neoprene face pad",
      "lo": [
        43.046875,
        1.7825,
        5.953125
      ],
      "size": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "step": 19,
      "material": "rubber",
      "group": "doorR",
      "installStep": 19,
      "baselineLo": [
        43.046875,
        1.7825,
        5.953125
      ],
      "baselineSize": [
        0.25,
        0.06125000000000003,
        13.09375
      ],
      "baselineCut": "13 3/32\" x 1/4\" x 1/16\"; fit thickness",
      "stage": 19,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0left",
      "name": "1798A21 surface leaf",
      "lo": [
        43.484375,
        -0.20500000000000002,
        5.328125
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "doorR",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        43.484375,
        -0.08,
        5.328125
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0right",
      "name": "1798A21 surface leaf",
      "lo": [
        44.921875,
        -0.20500000000000002,
        5.328125
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.921875,
        -0.08,
        5.328125
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0K0",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        5.328125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        5.328125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0K1",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        5.928125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorR",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        5.928125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0K2",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        6.528125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        6.528125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0K3",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        7.128125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorR",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        7.128125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0K4",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        7.728125
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        7.728125
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR0PIN",
      "name": "Removable hinge pin",
      "lo": [
        44.609375,
        -0.4375,
        5.298125
      ],
      "size": [
        0.25,
        0.25,
        3.13
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "pin",
      "removablePin": true,
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.609375,
        -0.3125,
        5.298125
      ],
      "baselineSize": [
        0.25,
        0.25,
        3.13
      ],
      "baselineCut": "3 13/100\" × 1/4\" × 1/4\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1left",
      "name": "1798A21 surface leaf",
      "lo": [
        43.484375,
        -0.20500000000000002,
        16.671875
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "doorR",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        43.484375,
        -0.08,
        16.671875
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1right",
      "name": "1798A21 surface leaf",
      "lo": [
        44.921875,
        -0.20500000000000002,
        16.671875
      ],
      "size": [
        1.0625,
        0.08,
        3
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "leaf",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.921875,
        -0.08,
        16.671875
      ],
      "baselineSize": [
        1.0625,
        0.08,
        3
      ],
      "baselineCut": "3\" × 1 1/16\" × 2/25\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1K0",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        16.671875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        16.671875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1K1",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        17.271875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorR",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        17.271875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1K2",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        17.871875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        17.871875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1K3",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        18.471875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "doorR",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        18.471875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1K4",
      "name": "1798A21 hinge knuckle",
      "lo": [
        44.546875,
        -0.5,
        19.071875
      ],
      "size": [
        0.375,
        0.375,
        0.6
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "barrel",
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.546875,
        -0.375,
        19.071875
      ],
      "baselineSize": [
        0.375,
        0.375,
        0.6
      ],
      "baselineCut": "3/5\" × 3/8\" × 3/8\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "HR1PIN",
      "name": "Removable hinge pin",
      "lo": [
        44.609375,
        -0.4375,
        16.641875
      ],
      "size": [
        0.25,
        0.25,
        3.13
      ],
      "step": 17,
      "material": "metal",
      "group": "body",
      "hingeShape": "pin",
      "removablePin": true,
      "referenceOnly": true,
      "installStep": 17,
      "baselineLo": [
        44.609375,
        -0.3125,
        16.641875
      ],
      "baselineSize": [
        0.25,
        0.25,
        3.13
      ],
      "baselineCut": "3 13/100\" × 1/4\" × 1/4\"",
      "stage": 17,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STRH",
      "name": "Door side stop",
      "lo": [
        44.484375,
        1.5,
        4.328125
      ],
      "size": [
        0.6875,
        0.375,
        16.34375
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        44.484375,
        1.5,
        4.328125
      ],
      "baselineSize": [
        0.6875,
        0.375,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STRJ",
      "name": "Door side stop",
      "lo": [
        24.875,
        1.5,
        4.328125
      ],
      "size": [
        0.6875,
        0.375,
        16.34375
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        24.875,
        1.5,
        4.328125
      ],
      "baselineSize": [
        0.6875,
        0.375,
        16.34375
      ],
      "baselineCut": "16 11/32\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STRB",
      "name": "Door horizontal stop",
      "lo": [
        26.125,
        1.5,
        3.828125
      ],
      "size": [
        17.796875,
        0.375,
        0.6875
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        26.125,
        1.5,
        3.828125
      ],
      "baselineSize": [
        17.796875,
        0.375,
        0.6875
      ],
      "baselineCut": "17 51/64\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "STRT",
      "name": "Door horizontal stop",
      "lo": [
        26.125,
        1.5,
        20.484375
      ],
      "size": [
        17.796875,
        0.375,
        0.6875
      ],
      "step": 15,
      "material": "pine",
      "group": "body",
      "installStep": 15,
      "baselineLo": [
        26.125,
        1.5,
        20.484375
      ],
      "baselineSize": [
        17.796875,
        0.375,
        0.6875
      ],
      "baselineCut": "17 51/64\" × 11/16\" × 3/8\"",
      "stage": 15,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "ML",
      "name": "Side vent screen",
      "lo": [
        0.709125,
        6.25,
        3.953125
      ],
      "size": [
        0.082,
        9.5,
        3.5
      ],
      "step": 12,
      "material": "mesh",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        0.703125,
        6,
        3.703125
      ],
      "baselineSize": [
        0.0625,
        10,
        4
      ],
      "baselineCut": "10\" × 4\"; 19-gauge wire, 1/2\" opening",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VLB",
      "name": "Side vent edge batten",
      "lo": [
        0.703125,
        6,
        3.703125
      ],
      "size": [
        0.75,
        10,
        1
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        0.765625,
        6,
        3.703125
      ],
      "baselineSize": [
        0.75,
        10,
        1
      ],
      "baselineCut": "10\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            0.703125,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VLT",
      "name": "Side vent edge batten",
      "lo": [
        0.703125,
        6,
        6.703125
      ],
      "size": [
        0.75,
        10,
        1
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        0.765625,
        6,
        6.703125
      ],
      "baselineSize": [
        0.75,
        10,
        1
      ],
      "baselineCut": "10\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            0.703125,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VLF",
      "name": "Side vent edge batten",
      "lo": [
        0.703125,
        6,
        4.703125
      ],
      "size": [
        0.75,
        1,
        2
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        0.765625,
        6,
        4.703125
      ],
      "baselineSize": [
        0.75,
        1,
        2
      ],
      "baselineCut": "2\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            0.703125,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VLA",
      "name": "Side vent edge batten",
      "lo": [
        0.703125,
        15,
        4.703125
      ],
      "size": [
        0.75,
        1,
        2
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        0.765625,
        15,
        4.703125
      ],
      "baselineSize": [
        0.75,
        1,
        2
      ],
      "baselineCut": "2\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            0.703125,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "MR",
      "name": "Side vent screen",
      "lo": [
        47.208875,
        6.25,
        3.953125
      ],
      "size": [
        0.082,
        9.5,
        3.5
      ],
      "step": 12,
      "material": "mesh",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        47.234375,
        6,
        3.703125
      ],
      "baselineSize": [
        0.0625,
        10,
        4
      ],
      "baselineCut": "10\" × 4\"; 19-gauge wire, 1/2\" opening",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VRB",
      "name": "Side vent edge batten",
      "lo": [
        46.546875,
        6,
        3.703125
      ],
      "size": [
        0.75,
        10,
        1
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        46.484375,
        6,
        3.703125
      ],
      "baselineSize": [
        0.75,
        10,
        1
      ],
      "baselineCut": "10\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            47.171875,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VRT",
      "name": "Side vent edge batten",
      "lo": [
        46.546875,
        6,
        6.703125
      ],
      "size": [
        0.75,
        10,
        1
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        46.484375,
        6,
        6.703125
      ],
      "baselineSize": [
        0.75,
        10,
        1
      ],
      "baselineCut": "10\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            47.171875,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VRF",
      "name": "Side vent edge batten",
      "lo": [
        46.546875,
        6,
        4.703125
      ],
      "size": [
        0.75,
        1,
        2
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        46.484375,
        6,
        4.703125
      ],
      "baselineSize": [
        0.75,
        1,
        2
      ],
      "baselineCut": "2\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            47.171875,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "VRA",
      "name": "Side vent edge batten",
      "lo": [
        46.546875,
        15,
        4.703125
      ],
      "size": [
        0.75,
        1,
        2
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "installStep": 12,
      "baselineLo": [
        46.484375,
        15,
        4.703125
      ],
      "baselineSize": [
        0.75,
        1,
        2
      ],
      "baselineCut": "2\" × 1\" × 3/4\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            47.171875,
            6.244,
            3.947125
          ],
          "size": [
            0.125,
            9.512,
            3.512
          ],
          "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
        }
      ],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "MTL",
      "name": "Roof screen",
      "lo": [
        3.25,
        5.25,
        23.208875
      ],
      "size": [
        19.5,
        13.5,
        0.082
      ],
      "step": 16,
      "material": "mesh",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        3,
        5,
        24.0
      ],
      "baselineSize": [
        20,
        14,
        0.0625
      ],
      "baselineCut": "20\" × 14\"; 19-gauge wire, 1/2\" opening",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTLF",
      "name": "Roof screen edge batten",
      "lo": [
        3,
        5,
        22.546875
      ],
      "size": [
        20,
        1,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        3,
        5,
        24.0625
      ],
      "baselineSize": [
        20,
        1,
        0.75
      ],
      "baselineCut": "20\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            3.2439999999999998,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        },
        {
          "lo": [
            10.574000000000002,
            4.999,
            23.083875
          ],
          "size": [
            1,
            1.002,
            0.22
          ],
          "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
        },
        {
          "lo": [
            14.361,
            4.999,
            23.083875
          ],
          "size": [
            1,
            1.002,
            0.22
          ],
          "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTLA",
      "name": "Roof screen edge batten",
      "lo": [
        3,
        18,
        22.546875
      ],
      "size": [
        20,
        1,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        3,
        18,
        24.0625
      ],
      "baselineSize": [
        20,
        1,
        0.75
      ],
      "baselineCut": "20\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            3.2439999999999998,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        },
        {
          "lo": [
            10.574000000000002,
            17.999,
            23.083875
          ],
          "size": [
            1,
            1.002,
            0.22
          ],
          "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
        },
        {
          "lo": [
            14.361,
            17.999,
            23.083875
          ],
          "size": [
            1,
            1.002,
            0.22
          ],
          "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTLL",
      "name": "Roof screen edge batten",
      "lo": [
        3,
        6,
        22.546875
      ],
      "size": [
        1,
        12,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        3,
        6,
        24.0625
      ],
      "baselineSize": [
        1,
        12,
        0.75
      ],
      "baselineCut": "12\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            3.2439999999999998,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTLR",
      "name": "Roof screen edge batten",
      "lo": [
        22,
        6,
        22.546875
      ],
      "size": [
        1,
        12,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        22,
        6,
        24.0625
      ],
      "baselineSize": [
        1,
        12,
        0.75
      ],
      "baselineCut": "12\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            3.2439999999999998,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "MTR",
      "name": "Roof screen",
      "lo": [
        25.25,
        5.25,
        23.208875
      ],
      "size": [
        19.5,
        13.5,
        0.082
      ],
      "step": 16,
      "material": "mesh",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        25,
        5,
        24.0
      ],
      "baselineSize": [
        20,
        14,
        0.0625
      ],
      "baselineCut": "20\" × 14\"; 19-gauge wire, 1/2\" opening",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTRF",
      "name": "Roof screen edge batten",
      "lo": [
        25,
        5,
        22.546875
      ],
      "size": [
        20,
        1,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        25,
        5,
        24.0625
      ],
      "baselineSize": [
        20,
        1,
        0.75
      ],
      "baselineCut": "20\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            25.244,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTRA",
      "name": "Roof screen edge batten",
      "lo": [
        25,
        18,
        22.546875
      ],
      "size": [
        20,
        1,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        25,
        18,
        24.0625
      ],
      "baselineSize": [
        20,
        1,
        0.75
      ],
      "baselineCut": "20\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            25.244,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTRL",
      "name": "Roof screen edge batten",
      "lo": [
        25,
        6,
        22.546875
      ],
      "size": [
        1,
        12,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        25,
        6,
        24.0625
      ],
      "baselineSize": [
        1,
        12,
        0.75
      ],
      "baselineCut": "12\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            25.244,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "RTRR",
      "name": "Roof screen edge batten",
      "lo": [
        44,
        6,
        22.546875
      ],
      "size": [
        1,
        12,
        0.75
      ],
      "step": 16,
      "material": "pine",
      "group": "roof",
      "installStep": 16,
      "baselineLo": [
        44,
        6,
        24.0625
      ],
      "baselineSize": [
        1,
        12,
        0.75
      ],
      "baselineCut": "12\" × 1\" × 3/4\"",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            25.244,
            5.244,
            23.171875
          ],
          "size": [
            19.512,
            13.512,
            0.13
          ],
          "purpose": "Wire pocket with 0.244-inch outer bearing land"
        }
      ],
      "normalAxis": 2,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CLB",
      "name": "Side floor cleat — solid stock",
      "lo": [
        0.703125,
        1.5,
        0.703125
      ],
      "size": [
        1.5,
        21.796875,
        1.5
      ],
      "step": 11,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 11,
      "baselineLo": [
        0.703125,
        1.5,
        0.703125
      ],
      "baselineSize": [
        1.5,
        21.796875,
        1.5
      ],
      "baselineCut": "21 51/64\" × 1 1/2\" × 1 1/2\"",
      "stage": 11,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CLU",
      "name": "Rear upright — solid stock",
      "lo": [
        0.703125,
        21.796875,
        2.203125
      ],
      "size": [
        1.5,
        1.5,
        19.59375
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 12,
      "baselineLo": [
        0.703125,
        21.796875,
        2.203125
      ],
      "baselineSize": [
        1.5,
        1.5,
        19.59375
      ],
      "baselineCut": "19 19/32\" × 1 1/2\" × 1 1/2\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CLT",
      "name": "Side roof ledger — solid stock",
      "lo": [
        0.703125,
        1.5,
        21.796875
      ],
      "size": [
        1.5,
        21.796875,
        1.5
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 12,
      "baselineLo": [
        0.703125,
        1.5,
        21.796875
      ],
      "baselineSize": [
        1.5,
        21.796875,
        1.5
      ],
      "baselineCut": "21 51/64\" × 1 1/2\" × 1 1/2\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CRB",
      "name": "Side floor cleat — solid stock",
      "lo": [
        45.796875,
        1.5,
        0.703125
      ],
      "size": [
        1.5,
        21.796875,
        1.5
      ],
      "step": 11,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 11,
      "baselineLo": [
        45.796875,
        1.5,
        0.703125
      ],
      "baselineSize": [
        1.5,
        21.796875,
        1.5
      ],
      "baselineCut": "21 51/64\" × 1 1/2\" × 1 1/2\"",
      "stage": 11,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CRU",
      "name": "Rear upright — solid stock",
      "lo": [
        45.796875,
        21.796875,
        2.203125
      ],
      "size": [
        1.5,
        1.5,
        19.59375
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 12,
      "baselineLo": [
        45.796875,
        21.796875,
        2.203125
      ],
      "baselineSize": [
        1.5,
        1.5,
        19.59375
      ],
      "baselineCut": "19 19/32\" × 1 1/2\" × 1 1/2\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CRT",
      "name": "Side roof ledger — solid stock",
      "lo": [
        45.796875,
        1.5,
        21.796875
      ],
      "size": [
        1.5,
        21.796875,
        1.5
      ],
      "step": 12,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 12,
      "baselineLo": [
        45.796875,
        1.5,
        21.796875
      ],
      "baselineSize": [
        1.5,
        21.796875,
        1.5
      ],
      "baselineCut": "21 51/64\" × 1 1/2\" × 1 1/2\"",
      "stage": 12,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CB",
      "name": "Rear floor cleat — solid stock",
      "lo": [
        2.203125,
        21.796875,
        0.703125
      ],
      "size": [
        43.59375,
        1.5,
        1.5
      ],
      "step": 11,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 11,
      "baselineLo": [
        2.203125,
        21.796875,
        0.703125
      ],
      "baselineSize": [
        43.59375,
        1.5,
        1.5
      ],
      "baselineCut": "43 19/32\" × 1 1/2\" × 1 1/2\"",
      "stage": 11,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CT",
      "name": "Rear roof ledger — solid stock",
      "lo": [
        2.203125,
        21.796875,
        21.796875
      ],
      "size": [
        43.59375,
        1.5,
        1.5
      ],
      "step": 13,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 13,
      "baselineLo": [
        2.203125,
        21.796875,
        21.796875
      ],
      "baselineSize": [
        43.59375,
        1.5,
        1.5
      ],
      "baselineCut": "43 19/32\" × 1 1/2\" × 1 1/2\"; centre top half-lap",
      "stage": 13,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            23.25,
            21.786875,
            22.546875
          ],
          "size": [
            1.5,
            1.52,
            0.76
          ]
        }
      ],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CC",
      "name": "Centre bearing — solid stock",
      "lo": [
        23.25,
        1.5,
        0.703125
      ],
      "size": [
        1.5,
        1.5,
        21.09375
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 14,
      "baselineLo": [
        23.25,
        1.5,
        0.703125
      ],
      "baselineSize": [
        1.5,
        1.5,
        21.09375
      ],
      "baselineCut": "21 3/32\" × 1 1/2\" × 1 1/2\"",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "CR",
      "name": "Roof centre rib — solid stock",
      "lo": [
        23.25,
        1.5,
        21.796875
      ],
      "size": [
        1.5,
        21.796875,
        1.5
      ],
      "step": 14,
      "material": "pine",
      "group": "body",
      "stockSection": "1.5 square",
      "installStep": 14,
      "baselineLo": [
        23.25,
        1.5,
        21.796875
      ],
      "baselineSize": [
        1.5,
        21.796875,
        1.5
      ],
      "baselineCut": "21 51/64\" x 1 1/2\" x 1 1/2\"; rear bottom half-lap",
      "stage": 14,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [
        {
          "lo": [
            23.24,
            21.796875,
            21.786875
          ],
          "size": [
            1.52,
            1.51,
            0.76
          ]
        }
      ],
      "normalAxis": 0,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "L-HP-base",
      "name": "Hasp mounting leaf",
      "lo": [
        22.78875,
        -0.07,
        10.25
      ],
      "size": [
        1.28,
        0.07,
        1.5
      ],
      "material": "black",
      "step": 18,
      "group": "body",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "hasp-base",
      "installStep": 18,
      "sourceMesh": "HP-base",
      "sourceTransform": {
        "xSign": 1,
        "xShiftInches": 1.02,
        "zShiftInches": 2
      },
      "baselineLo": [
        22.82,
        -0.07,
        10.25
      ],
      "baselineSize": [
        1.28,
        0.07,
        1.5
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "L-HP-pin",
      "name": "Hasp hinge pin",
      "lo": [
        23.97375,
        -0.235,
        10.25
      ],
      "size": [
        0.19,
        0.19,
        1.5
      ],
      "material": "black",
      "step": 18,
      "group": "body",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "hinge-pin",
      "installStep": 18,
      "sourceMesh": "HP-pin",
      "sourceTransform": {
        "xSign": 1,
        "xShiftInches": 1.02,
        "zShiftInches": 2
      },
      "baselineLo": [
        24.005,
        -0.235,
        10.25
      ],
      "baselineSize": [
        0.19,
        0.19,
        1.5
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "L-HP-flap",
      "name": "Slotted hasp flap",
      "lo": [
        20.86875,
        -0.37,
        10.25
      ],
      "size": [
        3.2,
        0.265,
        1.5
      ],
      "material": "black",
      "step": 18,
      "group": "body",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "hasp-flap",
      "installStep": 18,
      "sourceMesh": "HP-flap",
      "sourceTransform": {
        "xSign": 1,
        "xShiftInches": 1.02,
        "zShiftInches": 2
      },
      "baselineLo": [
        20.9,
        -0.37,
        10.25
      ],
      "baselineSize": [
        3.2,
        0.265,
        1.5
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "L-ST-base",
      "name": "Swivel-staple mounting plate",
      "lo": [
        20.98375,
        -0.07,
        10.205
      ],
      "size": [
        1.59,
        0.07,
        1.59
      ],
      "material": "black",
      "step": 18,
      "group": "doorL",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "staple-base",
      "installStep": 18,
      "sourceMesh": "ST-base",
      "sourceTransform": {
        "xSign": 1,
        "xShiftInches": 1.02,
        "zShiftInches": 2
      },
      "baselineLo": [
        21.015,
        -0.07,
        10.205
      ],
      "baselineSize": [
        1.59,
        0.07,
        1.59
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "L-ST-washer",
      "name": "Swivel spring washer housing",
      "lo": [
        21.228749999999998,
        -0.26,
        10.45
      ],
      "size": [
        1.1,
        0.19,
        1.1
      ],
      "material": "black",
      "step": 18,
      "group": "doorL",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "staple-housing",
      "installStep": 18,
      "sourceMesh": "ST-washer",
      "sourceTransform": {
        "xSign": 1,
        "xShiftInches": 1.02,
        "zShiftInches": 2
      },
      "baselineLo": [
        21.259999999999998,
        -0.26,
        10.45
      ],
      "baselineSize": [
        1.1,
        0.19,
        1.1
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "L-ST-tab",
      "name": "Hand-operated swivel staple",
      "lo": [
        21.68375,
        -1.2,
        10.455
      ],
      "size": [
        0.19,
        1.06,
        1.09
      ],
      "material": "black",
      "step": 18,
      "group": "doorL",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "staple-tab",
      "installStep": 18,
      "sourceMesh": "ST-tab",
      "sourceTransform": {
        "xSign": 1,
        "xShiftInches": 1.02,
        "zShiftInches": 2
      },
      "baselineLo": [
        21.715,
        -1.2,
        10.455
      ],
      "baselineSize": [
        0.19,
        1.06,
        1.09
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": "L",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "R-HP-base",
      "name": "Hasp mounting leaf",
      "lo": [
        23.931249999999995,
        -0.07,
        14.25
      ],
      "size": [
        1.28,
        0.07,
        1.5
      ],
      "material": "black",
      "step": 18,
      "group": "body",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "hasp-base",
      "installStep": 18,
      "sourceMesh": "HP-base",
      "sourceTransform": {
        "xSign": -1,
        "xShiftInches": 46.98,
        "zShiftInches": 6
      },
      "baselineLo": [
        23.899999999999995,
        -0.07,
        14.25
      ],
      "baselineSize": [
        1.28,
        0.07,
        1.5
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "R-HP-pin",
      "name": "Hasp hinge pin",
      "lo": [
        23.836249999999996,
        -0.235,
        14.25
      ],
      "size": [
        0.19,
        0.19,
        1.5
      ],
      "material": "black",
      "step": 18,
      "group": "body",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "hinge-pin",
      "installStep": 18,
      "sourceMesh": "HP-pin",
      "sourceTransform": {
        "xSign": -1,
        "xShiftInches": 46.98,
        "zShiftInches": 6
      },
      "baselineLo": [
        23.804999999999996,
        -0.235,
        14.25
      ],
      "baselineSize": [
        0.19,
        0.19,
        1.5
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "R-HP-flap",
      "name": "Slotted hasp flap",
      "lo": [
        23.93125,
        -0.37,
        14.25
      ],
      "size": [
        3.2,
        0.265,
        1.5
      ],
      "material": "black",
      "step": 18,
      "group": "body",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "hasp-flap",
      "installStep": 18,
      "sourceMesh": "HP-flap",
      "sourceTransform": {
        "xSign": -1,
        "xShiftInches": 46.98,
        "zShiftInches": 6
      },
      "baselineLo": [
        23.9,
        -0.37,
        14.25
      ],
      "baselineSize": [
        3.2,
        0.265,
        1.5
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": null,
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "R-ST-base",
      "name": "Swivel-staple mounting plate",
      "lo": [
        25.426249999999996,
        -0.07,
        14.205
      ],
      "size": [
        1.59,
        0.07,
        1.59
      ],
      "material": "black",
      "step": 18,
      "group": "doorR",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "staple-base",
      "installStep": 18,
      "sourceMesh": "ST-base",
      "sourceTransform": {
        "xSign": -1,
        "xShiftInches": 46.98,
        "zShiftInches": 6
      },
      "baselineLo": [
        25.394999999999996,
        -0.07,
        14.205
      ],
      "baselineSize": [
        1.59,
        0.07,
        1.59
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "R-ST-washer",
      "name": "Swivel spring washer housing",
      "lo": [
        25.671249999999997,
        -0.26,
        14.45
      ],
      "size": [
        1.1,
        0.19,
        1.1
      ],
      "material": "black",
      "step": 18,
      "group": "doorR",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "staple-housing",
      "installStep": 18,
      "sourceMesh": "ST-washer",
      "sourceTransform": {
        "xSign": -1,
        "xShiftInches": 46.98,
        "zShiftInches": 6
      },
      "baselineLo": [
        25.639999999999997,
        -0.26,
        14.45
      ],
      "baselineSize": [
        1.1,
        0.19,
        1.1
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 1,
      "grainAxis": 0,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "R-ST-tab",
      "name": "Hand-operated swivel staple",
      "lo": [
        26.126249999999995,
        -1.2,
        14.455
      ],
      "size": [
        0.19,
        1.06,
        1.09
      ],
      "material": "black",
      "step": 18,
      "group": "doorR",
      "product": "HASP",
      "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "shape": "staple-tab",
      "installStep": 18,
      "sourceMesh": "ST-tab",
      "sourceTransform": {
        "xSign": -1,
        "xShiftInches": 46.98,
        "zShiftInches": 6
      },
      "baselineLo": [
        26.094999999999995,
        -1.2,
        14.455
      ],
      "baselineSize": [
        0.19,
        1.06,
        1.09
      ],
      "baselineCut": null,
      "stage": 18,
      "roof": false,
      "door": "R",
      "bores": [],
      "holes": [],
      "normalAxis": 0,
      "grainAxis": 2,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "LB1",
      "name": "Steel strip beneath left lamp area",
      "lo": [
        10.574000000000002,
        5,
        23.083875
      ],
      "size": [
        1,
        14,
        0.125
      ],
      "material": "steel",
      "group": "roof",
      "step": 16,
      "installStep": 16,
      "product": "LAMP-STEEL",
      "baselineLo": [
        10.6,
        5,
        23.875
      ],
      "baselineSize": [
        1,
        14,
        0.125
      ],
      "baselineCut": "14 × 1 × 1/8 inches; deburr all edges and drill received stock",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [
        {
          "center": [
            11.074000000000002,
            5.5,
            24.0
          ],
          "axis": [
            0,
            0,
            -1
          ],
          "diameter": 0.28125
        },
        {
          "center": [
            11.074000000000002,
            18.484,
            24.0
          ],
          "axis": [
            0,
            0,
            -1
          ],
          "diameter": 0.28125
        }
      ],
      "holes": [],
      "normalAxis": 2,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "LB2",
      "name": "Steel strip beneath left lamp area",
      "lo": [
        14.361,
        5,
        23.083875
      ],
      "size": [
        1,
        14,
        0.125
      ],
      "material": "steel",
      "group": "roof",
      "step": 16,
      "installStep": 16,
      "product": "LAMP-STEEL",
      "baselineLo": [
        14.4,
        5,
        23.875
      ],
      "baselineSize": [
        1,
        14,
        0.125
      ],
      "baselineCut": "14 × 1 × 1/8 inches; deburr all edges and drill received stock",
      "stage": 16,
      "roof": true,
      "door": null,
      "bores": [
        {
          "center": [
            14.861,
            5.5,
            24.0
          ],
          "axis": [
            0,
            0,
            -1
          ],
          "diameter": 0.28125
        },
        {
          "center": [
            14.861,
            18.484,
            24.0
          ],
          "axis": [
            0,
            0,
            -1
          ],
          "diameter": 0.28125
        }
      ],
      "holes": [],
      "normalAxis": 2,
      "grainAxis": 1,
      "notes": "Own P03-02 source; received stock, products and fitted assembly govern."
    },
    {
      "id": "SP-HL0-left",
      "name": "Full hinge bearing spacer HL0 left",
      "lo": [
        2.015625,
        -0.125,
        5.328125
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    },
    {
      "id": "SP-HL0-right",
      "name": "Full hinge bearing spacer HL0 right",
      "lo": [
        3.453125,
        -0.125,
        5.328125
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    },
    {
      "id": "SP-HL1-left",
      "name": "Full hinge bearing spacer HL1 left",
      "lo": [
        2.015625,
        -0.125,
        16.671875
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    },
    {
      "id": "SP-HL1-right",
      "name": "Full hinge bearing spacer HL1 right",
      "lo": [
        3.453125,
        -0.125,
        16.671875
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    },
    {
      "id": "SP-HR0-left",
      "name": "Full hinge bearing spacer HR0 left",
      "lo": [
        43.484375,
        -0.125,
        5.328125
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    },
    {
      "id": "SP-HR0-right",
      "name": "Full hinge bearing spacer HR0 right",
      "lo": [
        44.921875,
        -0.125,
        5.328125
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    },
    {
      "id": "SP-HR1-left",
      "name": "Full hinge bearing spacer HR1 left",
      "lo": [
        43.484375,
        -0.125,
        16.671875
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    },
    {
      "id": "SP-HR1-right",
      "name": "Full hinge bearing spacer HR1 right",
      "lo": [
        44.921875,
        -0.125,
        16.671875
      ],
      "size": [
        1.0625,
        0.125,
        3
      ],
      "material": "aluminium",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 17,
      "step": 17,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "notes": "Equal full-leaf 1/8-inch solid spacers; supplier/qualified mounting acceptance required. No veneer under bearing."
    }
  ],
  "doors": [
    {
      "id": "doorL",
      "x": 3.390625,
      "z": 4.390625,
      "width": 19.203125,
      "height": 16.21875,
      "pivot": [
        3.265625,
        -0.3125,
        0
      ],
      "sign": -1,
      "window": [
        15.546875,
        12.84375
      ],
      "windowPercent": 64.11293546611984,
      "pane": [
        16.296875,
        13.59375,
        0.22
      ],
      "pivotBasis": "Reference axis with equal 1/8-inch full-leaf spacers; measured real hinges and roof-on motion trial control.",
      "latch": "latchL",
      "baseline": {
        "id": "doorL",
        "x": 3.328125,
        "z": 4.328125,
        "width": 19.296875,
        "height": 16.34375,
        "pivot": [
          3.265625,
          -0.1875,
          0
        ],
        "sign": -1,
        "window": [
          15.546875,
          12.84375
        ],
        "windowPercent": 63.313490373971405,
        "pane": [
          16.296875,
          13.59375,
          0.22
        ],
        "pivotBasis": "Illustrative tangent envelope; bench-measure actual part, front faces flush, pin centred over gap.",
        "latch": "latchL"
      },
      "bareHingeGap": 0.1875,
      "bareLatchGap": 0.15625,
      "bareTopBottomGap": 0.1875,
      "finishedHingeGap": 0.1265,
      "finishedLatchGap": 0.09525,
      "finishedTopBottomGap": 0.1265,
      "visible": [
        15.546875,
        12.84375
      ],
      "visibleFinished": [
        15.485875,
        12.78275
      ],
      "openDegrees": -100,
      "hingeCenters": [
        6.828125,
        18.171875
      ],
      "hingeDatum": "Retain the absolute source hinge centres; do not measure 2-1/2 inches again from trimmed ends."
    },
    {
      "id": "doorR",
      "x": 25.40625,
      "z": 4.390625,
      "width": 19.203125,
      "height": 16.21875,
      "pivot": [
        44.734375,
        -0.3125,
        0
      ],
      "sign": 1,
      "window": [
        15.546875,
        12.84375
      ],
      "windowPercent": 64.11293546611984,
      "pane": [
        16.296875,
        13.59375,
        0.22
      ],
      "pivotBasis": "Reference axis with equal 1/8-inch full-leaf spacers; measured real hinges and roof-on motion trial control.",
      "latch": "latchR",
      "baseline": {
        "id": "doorR",
        "x": 25.375,
        "z": 4.328125,
        "width": 19.296875,
        "height": 16.34375,
        "pivot": [
          44.734375,
          -0.1875,
          0
        ],
        "sign": 1,
        "window": [
          15.546875,
          12.84375
        ],
        "windowPercent": 63.313490373971405,
        "pane": [
          16.296875,
          13.59375,
          0.22
        ],
        "pivotBasis": "Illustrative tangent envelope; bench-measure actual part, front faces flush, pin centred over gap.",
        "latch": "latchR"
      },
      "bareHingeGap": 0.1875,
      "bareLatchGap": 0.15625,
      "bareTopBottomGap": 0.1875,
      "finishedHingeGap": 0.1265,
      "finishedLatchGap": 0.09525,
      "finishedTopBottomGap": 0.1265,
      "visible": [
        15.546875,
        12.84375
      ],
      "visibleFinished": [
        15.485875,
        12.78275
      ],
      "openDegrees": 100,
      "hingeCenters": [
        6.828125,
        18.171875
      ],
      "hingeDatum": "Retain the absolute source hinge centres; do not measure 2-1/2 inches again from trimmed ends."
    }
  ],
  "vents": [
    {
      "side": "L",
      "opening": [
        8,
        2
      ],
      "fromFront": 7,
      "bottomAboveFloor": 4,
      "substrateMax": 2,
      "clearance": 2,
      "meshCut": [
        9.5,
        3.5
      ],
      "overlap": 0.75,
      "maxBoltSpacing": null,
      "stationBasis": "Ten explicit revised open-cell connections per inlet in fasteners; actual cell registration governs transfer."
    },
    {
      "side": "R",
      "opening": [
        8,
        2
      ],
      "fromFront": 7,
      "bottomAboveFloor": 4,
      "substrateMax": 2,
      "clearance": 2,
      "meshCut": [
        9.5,
        3.5
      ],
      "overlap": 0.75,
      "maxBoltSpacing": null,
      "stationBasis": "Ten explicit revised open-cell connections per inlet in fasteners; actual cell registration governs transfer."
    }
  ],
  "substrateMax": 2,
  "mesh": {
    "aperture": 0.5,
    "gauge": 19,
    "wireDiameterIllustrative": 0.041
  },
  "roof": {
    "openings": [
      [
        18,
        12
      ],
      [
        18,
        12
      ]
    ],
    "fixtureSupport": "Own two 14 × 1 × 1/8-inch strips seated in inside roof retainers; mesh on strips. No fixture bears on unsupported cloth or veneer.",
    "loadRating": null,
    "rearRibJoint": "1.5 x 1.5 rear half-lap bearing: CT top and CR bottom notched 3/4 deep, one #8 x 1-1/4 retaining screw; front bearing retained by #8 x 2. No fixture load rating."
  },
  "units": "inches",
  "hardware": {
    "hinge": "McMaster1798A21; measured surface transfer procedure",
    "hasp": "National Hardware N305-979, two keyless swivel-staple hasps; optional padlocks are not required or supplied",
    "cap": "McMaster 91875A130 inside closed-end tip cover; primary Bolt Depot 2624 locknut",
    "schematicItems": [
      "Purchased hinge/hasp profiles, pins, Phillips recesses and thread forms are reference envelopes; received hardware and trials control."
    ],
    "fitInstructions": "operations.json"
  },
  "latches": [
    {
      "model": "National Hardware N305-979",
      "product": "HASP",
      "quantity": 1,
      "everydayOperation": "Turn the staple a quarter turn to align with the slot, swing the hasp outward, then open the door. Close hasp and turn staple across slot to secure. No key required; padlock optional and not included.",
      "mounting": "Hasp base on the fixed centre post, flap pointing toward its own door; swivel plate on the door latch stile. Transfer actual hardware after the offcut trial.",
      "centerInches": [
        21.77875,
        0,
        11
      ],
      "displayHaspPivotInches": [
        24.068749999999998,
        -0.14,
        11
      ],
      "nominalBaseInches": [
        1.59,
        1.59,
        0.07
      ],
      "nominalHolePitchInches": 1.12,
      "nominalSlotInches": [
        1.36,
        0.44
      ],
      "nominalTabWidthInches": 1.09,
      "drawing": "https://nationalhardwarestorage.blob.core.windows.net/documents/nh_td_v32_n305-979.pdf",
      "screwProduct": "HASP-SCREW",
      "screws": 7,
      "screwLengthInches": 0.625,
      "nominalWoodEngagementInches": 0.555,
      "nominalRearCoverInches": 0.195,
      "fitCheck": "Trial seven #10 × 5/8-inch screws in the received hardware and 3/4-inch pine offcuts. The three fixed-base and four swivel-plate holes must lie fully over wood, clear other fasteners and retain at least 1/16-inch wood behind the tips. Transfer actual holes; repeat hand operation after coating.",
      "displayBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "id": "latchL"
    },
    {
      "model": "National Hardware N305-979",
      "product": "HASP",
      "quantity": 1,
      "everydayOperation": "Turn the staple a quarter turn to align with the slot, swing the hasp outward, then open the door. Close hasp and turn staple across slot to secure. No key required; padlock optional and not included.",
      "mounting": "Hasp base on the fixed centre post, flap pointing toward its own door; swivel plate on the door latch stile. Transfer actual hardware after the offcut trial.",
      "centerInches": [
        26.221249999999998,
        0,
        15
      ],
      "displayHaspPivotInches": [
        23.93125,
        -0.14,
        15
      ],
      "nominalBaseInches": [
        1.59,
        1.59,
        0.07
      ],
      "nominalHolePitchInches": 1.12,
      "nominalSlotInches": [
        1.36,
        0.44
      ],
      "nominalTabWidthInches": 1.09,
      "drawing": "https://nationalhardwarestorage.blob.core.windows.net/documents/nh_td_v32_n305-979.pdf",
      "screwProduct": "HASP-SCREW",
      "screws": 7,
      "screwLengthInches": 0.625,
      "nominalWoodEngagementInches": 0.555,
      "nominalRearCoverInches": 0.195,
      "fitCheck": "Trial seven #10 × 5/8-inch screws in the received hardware and 3/4-inch pine offcuts. The three fixed-base and four swivel-plate holes must lie fully over wood, clear other fasteners and retain at least 1/16-inch wood behind the tips. Transfer actual holes; repeat hand operation after coating.",
      "displayBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.",
      "id": "latchR"
    }
  ],
  "articulation": {
    "doors": {
      "doorL_Pivot": -1.7453292519943295,
      "doorR_Pivot": 1.7453292519943295
    },
    "hasps": {
      "HaspPivotL": 1.8325957145940461,
      "HaspPivotR": -1.8325957145940461
    },
    "staples": {
      "StaplePivotL": -1.5707963267948966,
      "StaplePivotR": 1.5707963267948966
    },
    "padlocks": []
  },
  "lighting": {
    "scope": "Construction provision for one optional screen-top fixture; no species or wattage prescription",
    "example": {
      "manufacturer": "Fluker",
      "model": "27004",
      "name": "Mini Sun Dome",
      "url": "https://flukerfarms.com/mini-sun-dome/",
      "permittedMount": "Manufacturer permits placement on a screen top, external only",
      "electricalMaximumWatts": 100,
      "notRecommendedOperatingWatts": true
    },
    "fixtureCenterInches": [
      13,
      12
    ],
    "maximumOverallDiameterInches": 6,
    "rimDiameterRangeInches": [
      5.5,
      6
    ],
    "maximumAssembledWeightPounds": 2,
    "weightBasis": "Proposed design load; weigh the received fixture and bulb. Not a manufacturer weight or tested roof rating.",
    "geometricWoodMarginInches": 2.954,
    "thermalBasis": "Geometric margin is not a universal thermal clearance. Use the fixture and bulb instructions, thermostat and actual temperature measurements before animals; keep heat off wood, finish and cables.",
    "supportParts": [
      "LB1",
      "LB2"
    ],
    "placement": "Proposed rigid rim must descend into the left roof opening and contact both lowered strips through the cloth at four points. Actual rim body, controls and heat clearances require trial; no fixture elsewhere on unsupported cloth.",
    "coolSide": "Keep the right half free of heat fixtures; provide animal-specific shade and verify the finished temperature gradient.",
    "status": "Changed lower support seats; geometric fit, qualified load/thermal review and physical commissioning required.",
    "supportSurfaceZ": 23.290875
  },
  "modelContract": {
    "scope": "Actual source-derived wood, pockets, bores, full skins and round wire; reference purchased hardware geometry. No capacity, physical or animal approval.",
    "hardwareLimits": "Hinge/hasp forming, Phillips recess and thread detail are approximate; actual received parts, supplier acceptance and physical trial govern.",
    "derivative": "Own preserved P03-02 GLB and specification; no other enclosure dimensions substituted"
  },
  "documentRevision": "illustrated-01",
  "exterior": [
    48.0,
    24.0,
    24.0
  ],
  "veneerParts": [
    {
      "id": "V-floor-under",
      "parent": "P01",
      "name": "Exterior veneer · floor-under",
      "lo": [
        -0.0305,
        -0.0305,
        -0.0305
      ],
      "size": [
        48.061,
        24.061,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 48.061,
      "width": 24.061,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 48.561,
      "roughWidth": 24.561
    },
    {
      "id": "V-roof-top",
      "parent": "P02",
      "name": "Exterior veneer · roof-top",
      "lo": [
        -0.0305,
        -0.0305,
        24.0
      ],
      "size": [
        48.061,
        24.061,
        0.0305
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [
        {
          "lo": [
            4,
            6,
            23.196875
          ],
          "size": [
            18,
            12,
            0.9031249999999993
          ]
        },
        {
          "lo": [
            26,
            6,
            23.196875
          ],
          "size": [
            18,
            12,
            0.9031249999999993
          ]
        }
      ],
      "bores": [],
      "length": 48.061,
      "width": 24.061,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 48.561,
      "roughWidth": 24.561
    },
    {
      "id": "V-P01-front",
      "parent": "P01",
      "name": "Exterior veneer · P01-front",
      "lo": [
        -0.0305,
        -0.0305,
        0
      ],
      "size": [
        48.061,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 48.561,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P01-back",
      "parent": "P01",
      "name": "Exterior veneer · P01-back",
      "lo": [
        -0.0305,
        24.0,
        0
      ],
      "size": [
        48.061,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 48.561,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P01-left",
      "parent": "P01",
      "name": "Exterior veneer · P01-left",
      "lo": [
        -0.0305,
        0,
        0
      ],
      "size": [
        0.0305,
        24.0,
        0.703125
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 24.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P01-right",
      "parent": "P01",
      "name": "Exterior veneer · P01-right",
      "lo": [
        48.0,
        0,
        0
      ],
      "size": [
        0.0305,
        24.0,
        0.703125
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 24.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P02-front",
      "parent": "P02",
      "name": "Exterior veneer · P02-front",
      "lo": [
        -0.0305,
        -0.0305,
        23.296875
      ],
      "size": [
        48.061,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 48.561,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P02-back",
      "parent": "P02",
      "name": "Exterior veneer · P02-back",
      "lo": [
        -0.0305,
        24.0,
        23.296875
      ],
      "size": [
        48.061,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 48.561,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P02-left",
      "parent": "P02",
      "name": "Exterior veneer · P02-left",
      "lo": [
        -0.0305,
        0,
        23.296875
      ],
      "size": [
        0.0305,
        24.0,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 24.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P02-right",
      "parent": "P02",
      "name": "Exterior veneer · P02-right",
      "lo": [
        48.0,
        0,
        23.296875
      ],
      "size": [
        0.0305,
        24.0,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 24.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03L-face",
      "parent": "P03L",
      "name": "Exterior veneer · P03L-face",
      "lo": [
        -0.0305,
        0,
        0.703125
      ],
      "size": [
        0.0305,
        24.0,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [
        {
          "lo": [
            -0.1,
            7,
            4.703125
          ],
          "size": [
            0.903125,
            8,
            2
          ]
        }
      ],
      "bores": [],
      "length": 22.59375,
      "width": 24.0,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 24.5
    },
    {
      "id": "V-P03L-front",
      "parent": "P03L",
      "name": "Exterior veneer · P03L-front",
      "lo": [
        -0.0305,
        -0.0305,
        0.703125
      ],
      "size": [
        0.733625,
        0.0305,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 1.233625
    },
    {
      "id": "V-P03L-back",
      "parent": "P03L",
      "name": "Exterior veneer · P03L-back",
      "lo": [
        -0.0305,
        24.0,
        0.703125
      ],
      "size": [
        0.733625,
        0.0305,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 1.233625
    },
    {
      "id": "V-P03L-vent-near",
      "parent": "P03L",
      "name": "Exterior veneer · P03L-vent-near",
      "lo": [
        0,
        7,
        4.733625
      ],
      "size": [
        0.703125,
        0.0305,
        1.939
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 2.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03L-vent-far",
      "parent": "P03L",
      "name": "Exterior veneer · P03L-vent-far",
      "lo": [
        0,
        14.9695,
        4.733625
      ],
      "size": [
        0.703125,
        0.0305,
        1.939
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 2.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03L-vent-bottom",
      "parent": "P03L",
      "name": "Exterior veneer · P03L-vent-bottom",
      "lo": [
        0,
        7,
        4.703125
      ],
      "size": [
        0.703125,
        8,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 8.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03L-vent-top",
      "parent": "P03L",
      "name": "Exterior veneer · P03L-vent-top",
      "lo": [
        0,
        7,
        6.672625
      ],
      "size": [
        0.703125,
        8,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 8.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03R-face",
      "parent": "P03R",
      "name": "Exterior veneer · P03R-face",
      "lo": [
        48.0,
        0,
        0.703125
      ],
      "size": [
        0.0305,
        24.0,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [
        {
          "lo": [
            47.196875,
            7,
            4.703125
          ],
          "size": [
            0.9031250000000028,
            8,
            2
          ]
        }
      ],
      "bores": [],
      "length": 22.59375,
      "width": 24.0,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 24.5
    },
    {
      "id": "V-P03R-front",
      "parent": "P03R",
      "name": "Exterior veneer · P03R-front",
      "lo": [
        47.296875,
        -0.0305,
        0.703125
      ],
      "size": [
        0.733625,
        0.0305,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 1.233625
    },
    {
      "id": "V-P03R-back",
      "parent": "P03R",
      "name": "Exterior veneer · P03R-back",
      "lo": [
        47.296875,
        24.0,
        0.703125
      ],
      "size": [
        0.733625,
        0.0305,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 1.233625
    },
    {
      "id": "V-P03R-vent-near",
      "parent": "P03R",
      "name": "Exterior veneer · P03R-vent-near",
      "lo": [
        47.296875,
        7,
        4.733625
      ],
      "size": [
        0.703125,
        0.0305,
        1.939
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 2.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03R-vent-far",
      "parent": "P03R",
      "name": "Exterior veneer · P03R-vent-far",
      "lo": [
        47.296875,
        14.9695,
        4.733625
      ],
      "size": [
        0.703125,
        0.0305,
        1.939
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 2.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03R-vent-bottom",
      "parent": "P03R",
      "name": "Exterior veneer · P03R-vent-bottom",
      "lo": [
        47.296875,
        7,
        4.703125
      ],
      "size": [
        0.703125,
        8,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 8.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-P03R-vent-top",
      "parent": "P03R",
      "name": "Exterior veneer · P03R-vent-top",
      "lo": [
        47.296875,
        7,
        6.672625
      ],
      "size": [
        0.703125,
        8,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 8.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-back",
      "parent": "P04",
      "name": "Exterior veneer · back",
      "lo": [
        0.703125,
        24.0,
        0.703125
      ],
      "size": [
        46.59375,
        0.0305,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 46.59375,
      "width": 22.59375,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 47.09375,
      "roughWidth": 23.09375
    },
    {
      "id": "V-roof-L-left",
      "parent": "P02",
      "name": "Exterior veneer · roof-L-left",
      "lo": [
        4,
        6.0305,
        23.296875
      ],
      "size": [
        0.0305,
        11.939,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 12.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-roof-L-right",
      "parent": "P02",
      "name": "Exterior veneer · roof-L-right",
      "lo": [
        21.9695,
        6.0305,
        23.296875
      ],
      "size": [
        0.0305,
        11.939,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 12.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-roof-L-front",
      "parent": "P02",
      "name": "Exterior veneer · roof-L-front",
      "lo": [
        4,
        6,
        23.296875
      ],
      "size": [
        18,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 18.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-roof-L-back",
      "parent": "P02",
      "name": "Exterior veneer · roof-L-back",
      "lo": [
        4,
        17.9695,
        23.296875
      ],
      "size": [
        18,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 18.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-roof-R-left",
      "parent": "P02",
      "name": "Exterior veneer · roof-R-left",
      "lo": [
        26,
        6.0305,
        23.296875
      ],
      "size": [
        0.0305,
        11.939,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 12.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-roof-R-right",
      "parent": "P02",
      "name": "Exterior veneer · roof-R-right",
      "lo": [
        43.9695,
        6.0305,
        23.296875
      ],
      "size": [
        0.0305,
        11.939,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 1,
      "holes": [],
      "bores": [],
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 12.439,
      "roughWidth": 1.203125
    },
    {
      "id": "V-roof-R-front",
      "parent": "P02",
      "name": "Exterior veneer · roof-R-front",
      "lo": [
        26,
        6,
        23.296875
      ],
      "size": [
        18,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 18.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-roof-R-back",
      "parent": "P02",
      "name": "Exterior veneer · roof-R-back",
      "lo": [
        26,
        17.9695,
        23.296875
      ],
      "size": [
        18,
        0.0305,
        0.703125
      ],
      "material": "veneer",
      "group": "roof",
      "door": null,
      "roof": true,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 18.5,
      "roughWidth": 1.203125
    },
    {
      "id": "V-F0L-face",
      "parent": "F0L",
      "name": "Exterior veneer · F0L-face",
      "lo": [
        0.703125,
        -0.0305,
        0.703125
      ],
      "size": [
        2.5,
        0.0305,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 22.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 3.0
    },
    {
      "id": "V-F0R-face",
      "parent": "F0R",
      "name": "Exterior veneer · F0R-face",
      "lo": [
        44.796875,
        -0.0305,
        0.703125
      ],
      "size": [
        2.5,
        0.0305,
        22.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 22.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 23.09375,
      "roughWidth": 3.0
    },
    {
      "id": "V-F0B-face",
      "parent": "F0B",
      "name": "Exterior veneer · F0B-face",
      "lo": [
        3.203125,
        -0.0305,
        0.703125
      ],
      "size": [
        41.59375,
        0.0305,
        3.5
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 41.59375,
      "width": 3.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 42.09375,
      "roughWidth": 4.0
    },
    {
      "id": "V-F0T-face",
      "parent": "F0T",
      "name": "Exterior veneer · F0T-face",
      "lo": [
        3.203125,
        -0.0305,
        20.796875
      ],
      "size": [
        41.59375,
        0.0305,
        2.5
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 41.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 42.09375,
      "roughWidth": 3.0
    },
    {
      "id": "V-F0C-face",
      "parent": "F0C",
      "name": "Exterior veneer · F0C-face",
      "lo": [
        22.75,
        -0.0305,
        4.203125
      ],
      "size": [
        2.5,
        0.0305,
        16.59375
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 17.09375,
      "roughWidth": 3.0
    },
    {
      "id": "V-L-jamb-left",
      "parent": "F0L",
      "name": "Exterior veneer · L-jamb-left",
      "lo": [
        3.203125,
        0,
        4.233625
      ],
      "size": [
        0.0305,
        1.5,
        16.53275
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 17.03275,
      "roughWidth": 2.0
    },
    {
      "id": "V-L-jamb-right",
      "parent": "F0C",
      "name": "Exterior veneer · L-jamb-right",
      "lo": [
        22.7195,
        0,
        4.233625
      ],
      "size": [
        0.0305,
        1.5,
        16.53275
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 17.03275,
      "roughWidth": 2.0
    },
    {
      "id": "V-L-jamb-bottom",
      "parent": "F0B",
      "name": "Exterior veneer · L-jamb-bottom",
      "lo": [
        3.203125,
        0,
        4.203125
      ],
      "size": [
        19.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 20.046875,
      "roughWidth": 2.0
    },
    {
      "id": "V-L-jamb-top",
      "parent": "F0T",
      "name": "Exterior veneer · L-jamb-top",
      "lo": [
        3.203125,
        0,
        20.766375
      ],
      "size": [
        19.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 20.046875,
      "roughWidth": 2.0
    },
    {
      "id": "V-DL0H-face",
      "parent": "DL0H",
      "name": "Exterior veneer · DL0H-face",
      "lo": [
        3.360125,
        -0.0305,
        4.360125
      ],
      "size": [
        1.718,
        0.0305,
        16.27975
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.27975,
      "width": 1.718,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.77975,
      "roughWidth": 2.218
    },
    {
      "id": "V-DL0J-face",
      "parent": "DL0J",
      "name": "Exterior veneer · DL0J-face",
      "lo": [
        20.625,
        -0.0305,
        4.360125
      ],
      "size": [
        1.99925,
        0.0305,
        16.27975
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.27975,
      "width": 1.99925,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.77975,
      "roughWidth": 2.49925
    },
    {
      "id": "V-DL0B-face",
      "parent": "DL0B",
      "name": "Exterior veneer · DL0B-face",
      "lo": [
        5.078125,
        -0.0305,
        4.360125
      ],
      "size": [
        15.546875,
        0.0305,
        1.718
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.218
    },
    {
      "id": "V-DL0T-face",
      "parent": "DL0T",
      "name": "Exterior veneer · DL0T-face",
      "lo": [
        5.078125,
        -0.0305,
        18.921875
      ],
      "size": [
        15.546875,
        0.0305,
        1.718
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.218
    },
    {
      "id": "V-doorL-hinge",
      "parent": "DL0H",
      "name": "Exterior veneer · doorL-hinge",
      "lo": [
        3.360125,
        0,
        4.390625
      ],
      "size": [
        0.0305,
        1.5,
        16.21875
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.71875,
      "roughWidth": 2.0
    },
    {
      "id": "V-doorL-latch",
      "parent": "DL0J",
      "name": "Exterior veneer · doorL-latch",
      "lo": [
        22.59375,
        0,
        4.390625
      ],
      "size": [
        0.0305,
        1.5,
        16.21875
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.71875,
      "roughWidth": 2.0,
      "slopedEdge": {
        "edge": 22.59375,
        "direction": 1,
        "degrees": 5
      }
    },
    {
      "id": "V-doorL-bottom",
      "parent": "DL1B",
      "name": "Exterior veneer · doorL-bottom",
      "lo": [
        3.360125,
        0,
        4.360125
      ],
      "size": [
        19.264125,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "bevel": {
        "edge": 22.62425,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "V-doorL-top",
      "parent": "DL1T",
      "name": "Exterior veneer · doorL-top",
      "lo": [
        3.360125,
        0,
        20.609375
      ],
      "size": [
        19.264125,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "bevel": {
        "edge": 22.62425,
        "direction": -1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "V-windowL-left",
      "parent": "DL0H",
      "name": "Exterior veneer · windowL-left",
      "lo": [
        5.078125,
        0,
        6.108625
      ],
      "size": [
        0.0305,
        1.5,
        12.78275
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 13.28275,
      "roughWidth": 2.0
    },
    {
      "id": "V-windowL-right",
      "parent": "DL0J",
      "name": "Exterior veneer · windowL-right",
      "lo": [
        20.5945,
        0,
        6.108625
      ],
      "size": [
        0.0305,
        1.5,
        12.78275
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 13.28275,
      "roughWidth": 2.0
    },
    {
      "id": "V-windowL-bottom",
      "parent": "DL0B",
      "name": "Exterior veneer · windowL-bottom",
      "lo": [
        5.078125,
        0,
        6.078125
      ],
      "size": [
        15.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.0
    },
    {
      "id": "V-windowL-top",
      "parent": "DL0T",
      "name": "Exterior veneer · windowL-top",
      "lo": [
        5.078125,
        0,
        18.891375
      ],
      "size": [
        15.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorL",
      "door": "L",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.0
    },
    {
      "id": "V-R-jamb-left",
      "parent": "F0C",
      "name": "Exterior veneer · R-jamb-left",
      "lo": [
        25.25,
        0,
        4.233625
      ],
      "size": [
        0.0305,
        1.5,
        16.53275
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 17.03275,
      "roughWidth": 2.0
    },
    {
      "id": "V-R-jamb-right",
      "parent": "F0R",
      "name": "Exterior veneer · R-jamb-right",
      "lo": [
        44.766375,
        0,
        4.233625
      ],
      "size": [
        0.0305,
        1.5,
        16.53275
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 17.03275,
      "roughWidth": 2.0
    },
    {
      "id": "V-R-jamb-bottom",
      "parent": "F0B",
      "name": "Exterior veneer · R-jamb-bottom",
      "lo": [
        25.25,
        0,
        4.203125
      ],
      "size": [
        19.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 20.046875,
      "roughWidth": 2.0
    },
    {
      "id": "V-R-jamb-top",
      "parent": "F0T",
      "name": "Exterior veneer · R-jamb-top",
      "lo": [
        25.25,
        0,
        20.766375
      ],
      "size": [
        19.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "body",
      "door": null,
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 20.046875,
      "roughWidth": 2.0
    },
    {
      "id": "V-DR0H-face",
      "parent": "DR0H",
      "name": "Exterior veneer · DR0H-face",
      "lo": [
        25.37575,
        -0.0305,
        4.360125
      ],
      "size": [
        1.99925,
        0.0305,
        16.27975
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.27975,
      "width": 1.99925,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.77975,
      "roughWidth": 2.49925
    },
    {
      "id": "V-DR0J-face",
      "parent": "DR0J",
      "name": "Exterior veneer · DR0J-face",
      "lo": [
        42.921875,
        -0.0305,
        4.360125
      ],
      "size": [
        1.718,
        0.0305,
        16.27975
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.27975,
      "width": 1.718,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.77975,
      "roughWidth": 2.218
    },
    {
      "id": "V-DR0B-face",
      "parent": "DR0B",
      "name": "Exterior veneer · DR0B-face",
      "lo": [
        27.375,
        -0.0305,
        4.360125
      ],
      "size": [
        15.546875,
        0.0305,
        1.718
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.218
    },
    {
      "id": "V-DR0T-face",
      "parent": "DR0T",
      "name": "Exterior veneer · DR0T-face",
      "lo": [
        27.375,
        -0.0305,
        18.921875
      ],
      "size": [
        15.546875,
        0.0305,
        1.718
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 1,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.218
    },
    {
      "id": "V-doorR-hinge",
      "parent": "DR0J",
      "name": "Exterior veneer · doorR-hinge",
      "lo": [
        44.609375,
        0,
        4.390625
      ],
      "size": [
        0.0305,
        1.5,
        16.21875
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.71875,
      "roughWidth": 2.0
    },
    {
      "id": "V-doorR-latch",
      "parent": "DR0H",
      "name": "Exterior veneer · doorR-latch",
      "lo": [
        25.37575,
        0,
        4.390625
      ],
      "size": [
        0.0305,
        1.5,
        16.21875
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.71875,
      "roughWidth": 2.0,
      "slopedEdge": {
        "edge": 25.40625,
        "direction": -1,
        "degrees": 5
      }
    },
    {
      "id": "V-doorR-bottom",
      "parent": "DR1B",
      "name": "Exterior veneer · doorR-bottom",
      "lo": [
        25.37575,
        0,
        4.360125
      ],
      "size": [
        19.264125,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "bevel": {
        "edge": 25.37575,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "V-doorR-top",
      "parent": "DR1T",
      "name": "Exterior veneer · doorR-top",
      "lo": [
        25.37575,
        0,
        20.609375
      ],
      "size": [
        19.264125,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "bevel": {
        "edge": 25.37575,
        "direction": 1,
        "degrees": 5,
        "front": 0
      }
    },
    {
      "id": "V-windowR-left",
      "parent": "DR0H",
      "name": "Exterior veneer · windowR-left",
      "lo": [
        27.375,
        0,
        6.108625
      ],
      "size": [
        0.0305,
        1.5,
        12.78275
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 13.28275,
      "roughWidth": 2.0
    },
    {
      "id": "V-windowR-right",
      "parent": "DR0J",
      "name": "Exterior veneer · windowR-right",
      "lo": [
        42.891375,
        0,
        6.108625
      ],
      "size": [
        0.0305,
        1.5,
        12.78275
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 0,
      "grainAxis": 2,
      "holes": [],
      "bores": [],
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 13.28275,
      "roughWidth": 2.0
    },
    {
      "id": "V-windowR-bottom",
      "parent": "DR0B",
      "name": "Exterior veneer · windowR-bottom",
      "lo": [
        27.375,
        0,
        6.078125
      ],
      "size": [
        15.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.0
    },
    {
      "id": "V-windowR-top",
      "parent": "DR0T",
      "name": "Exterior veneer · windowR-top",
      "lo": [
        27.375,
        0,
        18.891375
      ],
      "size": [
        15.546875,
        1.5,
        0.0305
      ],
      "material": "veneer",
      "group": "doorR",
      "door": "R",
      "roof": false,
      "stage": 21,
      "step": 21,
      "normalAxis": 2,
      "grainAxis": 0,
      "holes": [],
      "bores": [],
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "quantity": 1,
      "roughLength": 16.046875,
      "roughWidth": 2.0
    }
  ],
  "fasteners": [
    {
      "id": "S001",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        4.328125,
        2.09375,
        6.203125
      ],
      "baselineStart": [
        4.328125,
        2.09375,
        6.203125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        4.328125,
        1.09375,
        6.203125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1H",
      "through": [
        "KLL",
        "GLL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S002",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        4.328125,
        2.09375,
        9.3515625
      ],
      "baselineStart": [
        4.328125,
        2.09375,
        9.3515625
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        4.328125,
        1.09375,
        9.3515625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1H",
      "through": [
        "KLL",
        "GLL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S003",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        4.328125,
        2.09375,
        12.5
      ],
      "baselineStart": [
        4.328125,
        2.09375,
        12.5
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        4.328125,
        1.09375,
        12.5
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1H",
      "through": [
        "KLL",
        "GLL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S004",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        4.328125,
        2.09375,
        15.6484375
      ],
      "baselineStart": [
        4.328125,
        2.09375,
        15.6484375
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        4.328125,
        1.09375,
        15.6484375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1H",
      "through": [
        "KLL",
        "GLL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S005",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        4.328125,
        2.09375,
        18.796875
      ],
      "baselineStart": [
        4.328125,
        2.09375,
        18.796875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        4.328125,
        1.09375,
        18.796875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1H",
      "through": [
        "KLL",
        "GLL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S006",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        21.375,
        2.09375,
        6.203125
      ],
      "baselineStart": [
        21.375,
        2.09375,
        6.203125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        21.375,
        1.09375,
        6.203125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1J",
      "through": [
        "KLR",
        "GLR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S007",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        21.375,
        2.09375,
        9.3515625
      ],
      "baselineStart": [
        21.375,
        2.09375,
        9.3515625
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        21.375,
        1.09375,
        9.3515625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1J",
      "through": [
        "KLR",
        "GLR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S008",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        21.375,
        2.09375,
        12.5
      ],
      "baselineStart": [
        21.375,
        2.09375,
        12.5
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        21.375,
        1.09375,
        12.5
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1J",
      "through": [
        "KLR",
        "GLR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S009",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        21.375,
        2.09375,
        15.6484375
      ],
      "baselineStart": [
        21.375,
        2.09375,
        15.6484375
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        21.375,
        1.09375,
        15.6484375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1J",
      "through": [
        "KLR",
        "GLR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S010",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        21.375,
        2.09375,
        18.796875
      ],
      "baselineStart": [
        21.375,
        2.09375,
        18.796875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        21.375,
        1.09375,
        18.796875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1J",
      "through": [
        "KLR",
        "GLR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S011",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        5.203125,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        5.203125,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        5.203125,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1B",
      "through": [
        "KLB",
        "GLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S012",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        9.02734375,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        9.02734375,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        9.02734375,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1B",
      "through": [
        "KLB",
        "GLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S013",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        12.8515625,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        12.8515625,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        12.8515625,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1B",
      "through": [
        "KLB",
        "GLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S014",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        16.67578125,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        16.67578125,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        16.67578125,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1B",
      "through": [
        "KLB",
        "GLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S015",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        20.5,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        20.5,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        20.5,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1B",
      "through": [
        "KLB",
        "GLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S016",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        5.203125,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        5.203125,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        5.203125,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1T",
      "through": [
        "KLT",
        "GLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S017",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        9.02734375,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        9.02734375,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        9.02734375,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1T",
      "through": [
        "KLT",
        "GLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S018",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        12.8515625,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        12.8515625,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        12.8515625,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1T",
      "through": [
        "KLT",
        "GLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S019",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        16.67578125,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        16.67578125,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        16.67578125,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1T",
      "through": [
        "KLT",
        "GLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S020",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorL",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        20.5,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        20.5,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "L",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        20.5,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DL1T",
      "through": [
        "KLT",
        "GLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S021",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        3.678125,
        1.5,
        5.028125
      ],
      "baselineStart": [
        3.678125,
        1.5,
        5.028125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.678125,
        0.25,
        5.028125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0H",
      "through": [
        "DL1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S022",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        3.678125,
        1.5,
        10.009375
      ],
      "baselineStart": [
        3.678125,
        1.5,
        10.009375
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.678125,
        0.25,
        10.009375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0H",
      "through": [
        "DL1H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S023",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        3.678125,
        1.5,
        14.990625000000001
      ],
      "baselineStart": [
        3.678125,
        1.5,
        14.990625000000001
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.678125,
        0.25,
        14.990625000000001
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0H",
      "through": [
        "DL1H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S024",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        3.678125,
        1.5,
        19.971875
      ],
      "baselineStart": [
        3.678125,
        1.5,
        19.971875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.678125,
        0.25,
        19.971875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0H",
      "through": [
        "DL1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S025",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        22.275,
        1.5,
        5.028125
      ],
      "baselineStart": [
        22.275,
        1.5,
        5.028125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        22.275,
        0.25,
        5.028125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0J",
      "through": [
        "DL1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S026",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        22.275,
        1.5,
        10.009375
      ],
      "baselineStart": [
        22.275,
        1.5,
        10.009375
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        22.275,
        0.25,
        10.009375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0J",
      "through": [
        "DL1J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S027",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        22.275,
        1.5,
        14.990625000000001
      ],
      "baselineStart": [
        22.275,
        1.5,
        14.990625000000001
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        22.275,
        0.25,
        14.990625000000001
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0J",
      "through": [
        "DL1J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S028",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        22.275,
        1.5,
        19.971875
      ],
      "baselineStart": [
        22.275,
        1.5,
        19.971875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        22.275,
        0.25,
        19.971875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0J",
      "through": [
        "DL1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S029",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        5.928125,
        1.5,
        4.728125
      ],
      "baselineStart": [
        5.928125,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        5.928125,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0B",
      "through": [
        "DL1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S030",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        10.627083333333331,
        1.5,
        4.728125
      ],
      "baselineStart": [
        10.627083333333331,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        10.627083333333331,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0B",
      "through": [
        "DL1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S031",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        15.326041666666665,
        1.5,
        4.728125
      ],
      "baselineStart": [
        15.326041666666665,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        15.326041666666665,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0B",
      "through": [
        "DL1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S032",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        20.025,
        1.5,
        4.728125
      ],
      "baselineStart": [
        20.025,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        20.025,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0B",
      "through": [
        "DL1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S033",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        5.928125,
        1.5,
        20.271875
      ],
      "baselineStart": [
        5.928125,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        5.928125,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0T",
      "through": [
        "DL1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S034",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        10.627083333333331,
        1.5,
        20.271875
      ],
      "baselineStart": [
        10.627083333333331,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        10.627083333333331,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0T",
      "through": [
        "DL1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S035",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        15.326041666666665,
        1.5,
        20.271875
      ],
      "baselineStart": [
        15.326041666666665,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        15.326041666666665,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0T",
      "through": [
        "DL1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S036",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorL",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        20.025,
        1.5,
        20.271875
      ],
      "baselineStart": [
        20.025,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        20.025,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL0T",
      "through": [
        "DL1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S037",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        26.625,
        2.09375,
        6.203125
      ],
      "baselineStart": [
        26.625,
        2.09375,
        6.203125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        26.625,
        1.09375,
        6.203125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1H",
      "through": [
        "KRL",
        "GRL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S038",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        26.625,
        2.09375,
        9.3515625
      ],
      "baselineStart": [
        26.625,
        2.09375,
        9.3515625
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        26.625,
        1.09375,
        9.3515625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1H",
      "through": [
        "KRL",
        "GRL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S039",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        26.625,
        2.09375,
        12.5
      ],
      "baselineStart": [
        26.625,
        2.09375,
        12.5
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        26.625,
        1.09375,
        12.5
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1H",
      "through": [
        "KRL",
        "GRL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S040",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        26.625,
        2.09375,
        15.6484375
      ],
      "baselineStart": [
        26.625,
        2.09375,
        15.6484375
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        26.625,
        1.09375,
        15.6484375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1H",
      "through": [
        "KRL",
        "GRL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S041",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        26.625,
        2.09375,
        18.796875
      ],
      "baselineStart": [
        26.625,
        2.09375,
        18.796875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        26.625,
        1.09375,
        18.796875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1H",
      "through": [
        "KRL",
        "GRL"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S042",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        43.671875,
        2.09375,
        6.203125
      ],
      "baselineStart": [
        43.671875,
        2.09375,
        6.203125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        43.671875,
        1.09375,
        6.203125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1J",
      "through": [
        "KRR",
        "GRR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S043",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        43.671875,
        2.09375,
        9.3515625
      ],
      "baselineStart": [
        43.671875,
        2.09375,
        9.3515625
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        43.671875,
        1.09375,
        9.3515625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1J",
      "through": [
        "KRR",
        "GRR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S044",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        43.671875,
        2.09375,
        12.5
      ],
      "baselineStart": [
        43.671875,
        2.09375,
        12.5
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        43.671875,
        1.09375,
        12.5
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1J",
      "through": [
        "KRR",
        "GRR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S045",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        43.671875,
        2.09375,
        15.6484375
      ],
      "baselineStart": [
        43.671875,
        2.09375,
        15.6484375
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        43.671875,
        1.09375,
        15.6484375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1J",
      "through": [
        "KRR",
        "GRR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S046",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        43.671875,
        2.09375,
        18.796875
      ],
      "baselineStart": [
        43.671875,
        2.09375,
        18.796875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        43.671875,
        1.09375,
        18.796875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1J",
      "through": [
        "KRR",
        "GRR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S047",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        27.5,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        27.5,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        27.5,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1B",
      "through": [
        "KRB",
        "GRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S048",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        31.32421875,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        31.32421875,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        31.32421875,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1B",
      "through": [
        "KRB",
        "GRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S049",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        35.1484375,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        35.1484375,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        35.1484375,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1B",
      "through": [
        "KRB",
        "GRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S050",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        38.97265625,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        38.97265625,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        38.97265625,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1B",
      "through": [
        "KRB",
        "GRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S051",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        42.796875,
        2.09375,
        5.328125
      ],
      "baselineStart": [
        42.796875,
        2.09375,
        5.328125
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        42.796875,
        1.09375,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1B",
      "through": [
        "KRB",
        "GRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S052",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        27.5,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        27.5,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        27.5,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1T",
      "through": [
        "KRT",
        "GRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S053",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        31.32421875,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        31.32421875,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        31.32421875,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1T",
      "through": [
        "KRT",
        "GRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S054",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        35.1484375,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        35.1484375,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        35.1484375,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1T",
      "through": [
        "KRT",
        "GRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S055",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        38.97265625,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        38.97265625,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        38.97265625,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1T",
      "through": [
        "KRT",
        "GRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S056",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 19,
      "group": "doorR",
      "use": "glazing cap + spacer",
      "installStep": 19,
      "start": [
        42.796875,
        2.09375,
        19.671875
      ],
      "baselineStart": [
        42.796875,
        2.09375,
        19.671875
      ],
      "sku": "W100",
      "stage": 19,
      "door": "R",
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        42.796875,
        1.09375,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "DR1T",
      "through": [
        "KRT",
        "GRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S057",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        25.725,
        1.5,
        5.028125
      ],
      "baselineStart": [
        25.725,
        1.5,
        5.028125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        25.725,
        0.25,
        5.028125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0H",
      "through": [
        "DR1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S058",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        25.725,
        1.5,
        10.009375
      ],
      "baselineStart": [
        25.725,
        1.5,
        10.009375
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        25.725,
        0.25,
        10.009375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0H",
      "through": [
        "DR1H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S059",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        25.725,
        1.5,
        14.990625000000001
      ],
      "baselineStart": [
        25.725,
        1.5,
        14.990625000000001
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        25.725,
        0.25,
        14.990625000000001
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0H",
      "through": [
        "DR1H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S060",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        25.725,
        1.5,
        19.971875
      ],
      "baselineStart": [
        25.725,
        1.5,
        19.971875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        25.725,
        0.25,
        19.971875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0H",
      "through": [
        "DR1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S061",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        44.321875,
        1.5,
        5.028125
      ],
      "baselineStart": [
        44.321875,
        1.5,
        5.028125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.321875,
        0.25,
        5.028125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0J",
      "through": [
        "DR1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S062",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        44.321875,
        1.5,
        10.009375
      ],
      "baselineStart": [
        44.321875,
        1.5,
        10.009375
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.321875,
        0.25,
        10.009375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0J",
      "through": [
        "DR1J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S063",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        44.321875,
        1.5,
        14.990625000000001
      ],
      "baselineStart": [
        44.321875,
        1.5,
        14.990625000000001
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.321875,
        0.25,
        14.990625000000001
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0J",
      "through": [
        "DR1J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S064",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        44.321875,
        1.5,
        19.971875
      ],
      "baselineStart": [
        44.321875,
        1.5,
        19.971875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.321875,
        0.25,
        19.971875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0J",
      "through": [
        "DR1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S065",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        27.975,
        1.5,
        4.728125
      ],
      "baselineStart": [
        27.975,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        27.975,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0B",
      "through": [
        "DR1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S066",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        32.67395833333333,
        1.5,
        4.728125
      ],
      "baselineStart": [
        32.67395833333333,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        32.67395833333333,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0B",
      "through": [
        "DR1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S067",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        37.37291666666667,
        1.5,
        4.728125
      ],
      "baselineStart": [
        37.37291666666667,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        37.37291666666667,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0B",
      "through": [
        "DR1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S068",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        42.071875,
        1.5,
        4.728125
      ],
      "baselineStart": [
        42.071875,
        1.5,
        4.728125
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        42.071875,
        0.25,
        4.728125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0B",
      "through": [
        "DR1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S069",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        27.975,
        1.5,
        20.271875
      ],
      "baselineStart": [
        27.975,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        27.975,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0T",
      "through": [
        "DR1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S070",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        32.67395833333333,
        1.5,
        20.271875
      ],
      "baselineStart": [
        32.67395833333333,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        32.67395833333333,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0T",
      "through": [
        "DR1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S071",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        37.37291666666667,
        1.5,
        20.271875
      ],
      "baselineStart": [
        37.37291666666667,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        37.37291666666667,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0T",
      "through": [
        "DR1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S072",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 17,
      "group": "doorR",
      "use": "door lamination",
      "installStep": 17,
      "start": [
        42.071875,
        1.5,
        20.271875
      ],
      "baselineStart": [
        42.071875,
        1.5,
        20.271875
      ],
      "sku": "W125",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        42.071875,
        0.25,
        20.271875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR0T",
      "through": [
        "DR1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S073",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        1.453125,
        3.0,
        0
      ],
      "baselineStart": [
        1.453125,
        3.0,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        3.0,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S074",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        1.453125,
        3.0,
        24.0
      ],
      "baselineStart": [
        1.453125,
        3.0,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        3.0,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S075",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        1.453125,
        7.44921875,
        0
      ],
      "baselineStart": [
        1.453125,
        7.44921875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        7.44921875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S076",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        1.453125,
        7.44921875,
        24.0
      ],
      "baselineStart": [
        1.453125,
        7.44921875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        7.44921875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S077",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        1.453125,
        11.8984375,
        0
      ],
      "baselineStart": [
        1.453125,
        11.8984375,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        11.8984375,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S078",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        1.453125,
        11.8984375,
        24.0
      ],
      "baselineStart": [
        1.453125,
        11.8984375,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        11.8984375,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S079",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        1.453125,
        16.34765625,
        0
      ],
      "baselineStart": [
        1.453125,
        16.34765625,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        16.34765625,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S080",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        1.453125,
        16.34765625,
        24.0
      ],
      "baselineStart": [
        1.453125,
        16.34765625,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        16.34765625,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S081",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        1.453125,
        20.796875,
        0
      ],
      "baselineStart": [
        1.453125,
        20.796875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        20.796875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S082",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        1.453125,
        20.796875,
        24.0
      ],
      "baselineStart": [
        1.453125,
        20.796875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        20.796875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S083",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        46.546875,
        3.0,
        0
      ],
      "baselineStart": [
        46.546875,
        3.0,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        3.0,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S084",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        46.546875,
        3.0,
        24.0
      ],
      "baselineStart": [
        46.546875,
        3.0,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        3.0,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S085",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        46.546875,
        7.44921875,
        0
      ],
      "baselineStart": [
        46.546875,
        7.44921875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        7.44921875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S086",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        46.546875,
        7.44921875,
        24.0
      ],
      "baselineStart": [
        46.546875,
        7.44921875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        7.44921875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S087",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        46.546875,
        11.8984375,
        0
      ],
      "baselineStart": [
        46.546875,
        11.8984375,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        11.8984375,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S088",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        46.546875,
        11.8984375,
        24.0
      ],
      "baselineStart": [
        46.546875,
        11.8984375,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        11.8984375,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S089",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        46.546875,
        16.34765625,
        0
      ],
      "baselineStart": [
        46.546875,
        16.34765625,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        16.34765625,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S090",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        46.546875,
        16.34765625,
        24.0
      ],
      "baselineStart": [
        46.546875,
        16.34765625,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        16.34765625,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S091",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to side cleat",
      "installStep": 11,
      "start": [
        46.546875,
        20.796875,
        0
      ],
      "baselineStart": [
        46.546875,
        20.796875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        20.796875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S092",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to side ledger",
      "installStep": 16,
      "start": [
        46.546875,
        20.796875,
        24.0
      ],
      "baselineStart": [
        46.546875,
        20.796875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        20.796875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S093",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        3.203125,
        22.546875,
        0
      ],
      "baselineStart": [
        3.203125,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.203125,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S094",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        3.203125,
        22.546875,
        24.0
      ],
      "baselineStart": [
        3.203125,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.203125,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S095",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        7.824652777777778,
        22.546875,
        0
      ],
      "baselineStart": [
        7.824652777777778,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        7.824652777777778,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S096",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        7.824652777777778,
        22.546875,
        24.0
      ],
      "baselineStart": [
        7.824652777777778,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        7.824652777777778,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S097",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        12.446180555555555,
        22.546875,
        0
      ],
      "baselineStart": [
        12.446180555555555,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        12.446180555555555,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S098",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        12.446180555555555,
        22.546875,
        24.0
      ],
      "baselineStart": [
        12.446180555555555,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        12.446180555555555,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S099",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        17.067708333333336,
        22.546875,
        0
      ],
      "baselineStart": [
        17.067708333333336,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        17.067708333333336,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S100",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        17.067708333333336,
        22.546875,
        24.0
      ],
      "baselineStart": [
        17.067708333333336,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        17.067708333333336,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S101",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        21.68923611111111,
        22.546875,
        0
      ],
      "baselineStart": [
        21.68923611111111,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        21.68923611111111,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S102",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        21.68923611111111,
        22.546875,
        24.0
      ],
      "baselineStart": [
        21.68923611111111,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        21.68923611111111,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S103",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        26.31076388888889,
        22.546875,
        0
      ],
      "baselineStart": [
        26.31076388888889,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        26.31076388888889,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S104",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        26.31076388888889,
        22.546875,
        24.0
      ],
      "baselineStart": [
        26.31076388888889,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        26.31076388888889,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S105",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        30.932291666666668,
        22.546875,
        0
      ],
      "baselineStart": [
        30.932291666666668,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        30.932291666666668,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S106",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        30.932291666666668,
        22.546875,
        24.0
      ],
      "baselineStart": [
        30.932291666666668,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        30.932291666666668,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S107",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        35.55381944444444,
        22.546875,
        0
      ],
      "baselineStart": [
        35.55381944444444,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        35.55381944444444,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S108",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        35.55381944444444,
        22.546875,
        24.0
      ],
      "baselineStart": [
        35.55381944444444,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        35.55381944444444,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S109",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        40.17534722222222,
        22.546875,
        0
      ],
      "baselineStart": [
        40.17534722222222,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        40.17534722222222,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S110",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        40.17534722222222,
        22.546875,
        24.0
      ],
      "baselineStart": [
        40.17534722222222,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        40.17534722222222,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S111",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 11,
      "group": "body",
      "use": "floor to rear cleat",
      "installStep": 11,
      "start": [
        44.796875,
        22.546875,
        0
      ],
      "baselineStart": [
        44.796875,
        22.546875,
        0
      ],
      "sku": "W125",
      "stage": 11,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.796875,
        22.546875,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S112",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 16,
      "group": "roof",
      "use": "roof to rear ledger",
      "installStep": 16,
      "start": [
        44.796875,
        22.546875,
        24.0
      ],
      "baselineStart": [
        44.796875,
        22.546875,
        24.0
      ],
      "sku": "W125",
      "stage": 16,
      "door": null,
      "roof": true,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.796875,
        22.546875,
        22.75
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P02"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S113",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        4.0,
        1.453125
      ],
      "baselineStart": [
        0,
        4.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        4.0,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S114",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        8.07421875,
        1.453125
      ],
      "baselineStart": [
        0,
        8.07421875,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        8.07421875,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S115",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        12.1484375,
        1.453125
      ],
      "baselineStart": [
        0,
        12.1484375,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        12.1484375,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S116",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        16.22265625,
        1.453125
      ],
      "baselineStart": [
        0,
        16.22265625,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        16.22265625,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S117",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        20.296875,
        1.453125
      ],
      "baselineStart": [
        0,
        20.296875,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        20.296875,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLB",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S118",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        4.0,
        22.546875
      ],
      "baselineStart": [
        0,
        4.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        4.0,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S119",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        8.07421875,
        22.546875
      ],
      "baselineStart": [
        0,
        8.07421875,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        8.07421875,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S120",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        12.1484375,
        22.546875
      ],
      "baselineStart": [
        0,
        12.1484375,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        12.1484375,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S121",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        16.22265625,
        22.546875
      ],
      "baselineStart": [
        0,
        16.22265625,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        16.22265625,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S122",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        0,
        20.296875,
        22.546875
      ],
      "baselineStart": [
        0,
        20.296875,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        20.296875,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLT",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S123",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        0,
        22.546875,
        3.703125
      ],
      "baselineStart": [
        0,
        22.546875,
        3.703125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        22.546875,
        3.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S124",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        0,
        22.546875,
        7.8515625
      ],
      "baselineStart": [
        0,
        22.546875,
        7.8515625
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        22.546875,
        7.8515625
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S125",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        0,
        22.546875,
        12.0
      ],
      "baselineStart": [
        0,
        22.546875,
        12.0
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        22.546875,
        12.0
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S126",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        0,
        22.546875,
        16.1484375
      ],
      "baselineStart": [
        0,
        22.546875,
        16.1484375
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        22.546875,
        16.1484375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S127",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        0,
        22.546875,
        20.296875
      ],
      "baselineStart": [
        0,
        22.546875,
        20.296875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        22.546875,
        20.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S128",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        0,
        0.55,
        2.703125
      ],
      "baselineStart": [
        0,
        0.55,
        2.703125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        0.55,
        2.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S129",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        0,
        0.55,
        7.3515625
      ],
      "baselineStart": [
        0,
        0.55,
        7.3515625
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        0.55,
        7.3515625
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S130",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        0,
        0.55,
        12.0
      ],
      "baselineStart": [
        0,
        0.55,
        12.0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        0.55,
        12.0
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S131",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        0,
        0.55,
        16.6484375
      ],
      "baselineStart": [
        0,
        0.55,
        16.6484375
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        0.55,
        16.6484375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S132",
      "axis": [
        1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        0,
        0.55,
        21.296875
      ],
      "baselineStart": [
        0,
        0.55,
        21.296875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.25,
        0.55,
        21.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "P03L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S133",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        4.0,
        1.453125
      ],
      "baselineStart": [
        48.0,
        4.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        4.0,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S134",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        8.07421875,
        1.453125
      ],
      "baselineStart": [
        48.0,
        8.07421875,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        8.07421875,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S135",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        12.1484375,
        1.453125
      ],
      "baselineStart": [
        48.0,
        12.1484375,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        12.1484375,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S136",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        16.22265625,
        1.453125
      ],
      "baselineStart": [
        48.0,
        16.22265625,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        16.22265625,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S137",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        20.296875,
        1.453125
      ],
      "baselineStart": [
        48.0,
        20.296875,
        1.453125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        20.296875,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRB",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S138",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        4.0,
        22.546875
      ],
      "baselineStart": [
        48.0,
        4.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        4.0,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S139",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        8.07421875,
        22.546875
      ],
      "baselineStart": [
        48.0,
        8.07421875,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        8.07421875,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S140",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        12.1484375,
        22.546875
      ],
      "baselineStart": [
        48.0,
        12.1484375,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        12.1484375,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S141",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        16.22265625,
        22.546875
      ],
      "baselineStart": [
        48.0,
        16.22265625,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        16.22265625,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S142",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to ledger",
      "installStep": 12,
      "start": [
        48.0,
        20.296875,
        22.546875
      ],
      "baselineStart": [
        48.0,
        20.296875,
        22.546875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        20.296875,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRT",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S143",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        48.0,
        22.546875,
        3.703125
      ],
      "baselineStart": [
        48.0,
        22.546875,
        3.703125
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        22.546875,
        3.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S144",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        48.0,
        22.546875,
        7.8515625
      ],
      "baselineStart": [
        48.0,
        22.546875,
        7.8515625
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        22.546875,
        7.8515625
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S145",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        48.0,
        22.546875,
        12.0
      ],
      "baselineStart": [
        48.0,
        22.546875,
        12.0
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        22.546875,
        12.0
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S146",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        48.0,
        22.546875,
        16.1484375
      ],
      "baselineStart": [
        48.0,
        22.546875,
        16.1484375
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        22.546875,
        16.1484375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S147",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 12,
      "group": "body",
      "use": "side to rear upright",
      "installStep": 12,
      "start": [
        48.0,
        22.546875,
        20.296875
      ],
      "baselineStart": [
        48.0,
        22.546875,
        20.296875
      ],
      "sku": "W125",
      "stage": 12,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        22.546875,
        20.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S148",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        48.0,
        0.55,
        2.703125
      ],
      "baselineStart": [
        48.0,
        0.55,
        2.703125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        0.55,
        2.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S149",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        48.0,
        0.55,
        7.3515625
      ],
      "baselineStart": [
        48.0,
        0.55,
        7.3515625
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        0.55,
        7.3515625
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S150",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        48.0,
        0.55,
        12.0
      ],
      "baselineStart": [
        48.0,
        0.55,
        12.0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        0.55,
        12.0
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S151",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        48.0,
        0.55,
        16.6484375
      ],
      "baselineStart": [
        48.0,
        0.55,
        16.6484375
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        0.55,
        16.6484375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S152",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "side to front frame",
      "installStep": 14,
      "start": [
        48.0,
        0.55,
        21.296875
      ],
      "baselineStart": [
        48.0,
        0.55,
        21.296875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.75,
        0.55,
        21.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "P03R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S153",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        3.203125,
        24.0,
        1.453125
      ],
      "baselineStart": [
        3.203125,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.203125,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S154",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        7.824652777777778,
        24.0,
        1.453125
      ],
      "baselineStart": [
        7.824652777777778,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        7.824652777777778,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S155",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        12.446180555555555,
        24.0,
        1.453125
      ],
      "baselineStart": [
        12.446180555555555,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        12.446180555555555,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S156",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        17.067708333333336,
        24.0,
        1.453125
      ],
      "baselineStart": [
        17.067708333333336,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        17.067708333333336,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S157",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        21.68923611111111,
        24.0,
        1.453125
      ],
      "baselineStart": [
        21.68923611111111,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        21.68923611111111,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S158",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        26.31076388888889,
        24.0,
        1.453125
      ],
      "baselineStart": [
        26.31076388888889,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        26.31076388888889,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S159",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        30.932291666666668,
        24.0,
        1.453125
      ],
      "baselineStart": [
        30.932291666666668,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        30.932291666666668,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S160",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        35.55381944444444,
        24.0,
        1.453125
      ],
      "baselineStart": [
        35.55381944444444,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        35.55381944444444,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S161",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        40.17534722222222,
        24.0,
        1.453125
      ],
      "baselineStart": [
        40.17534722222222,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        40.17534722222222,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S162",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        44.796875,
        24.0,
        1.453125
      ],
      "baselineStart": [
        44.796875,
        24.0,
        1.453125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.796875,
        22.75,
        1.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CB",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S163",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        3.203125,
        24.0,
        22.546875
      ],
      "baselineStart": [
        3.203125,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.203125,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S164",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        7.824652777777778,
        24.0,
        22.546875
      ],
      "baselineStart": [
        7.824652777777778,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        7.824652777777778,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S165",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        12.446180555555555,
        24.0,
        22.546875
      ],
      "baselineStart": [
        12.446180555555555,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        12.446180555555555,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S166",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        17.067708333333336,
        24.0,
        22.546875
      ],
      "baselineStart": [
        17.067708333333336,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        17.067708333333336,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S167",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        21.68923611111111,
        24.0,
        22.546875
      ],
      "baselineStart": [
        21.68923611111111,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        21.68923611111111,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S168",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        26.31076388888889,
        24.0,
        22.546875
      ],
      "baselineStart": [
        26.31076388888889,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        26.31076388888889,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S169",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        30.932291666666668,
        24.0,
        22.546875
      ],
      "baselineStart": [
        30.932291666666668,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        30.932291666666668,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S170",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        35.55381944444444,
        24.0,
        22.546875
      ],
      "baselineStart": [
        35.55381944444444,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        35.55381944444444,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S171",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        40.17534722222222,
        24.0,
        22.546875
      ],
      "baselineStart": [
        40.17534722222222,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        40.17534722222222,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S172",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to cleat",
      "installStep": 13,
      "start": [
        44.796875,
        24.0,
        22.546875
      ],
      "baselineStart": [
        44.796875,
        24.0,
        22.546875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.796875,
        22.75,
        22.546875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S173",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        1.453125,
        24.0,
        4.703125
      ],
      "baselineStart": [
        1.453125,
        24.0,
        4.703125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        22.75,
        4.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S174",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        1.453125,
        24.0,
        9.567708333333332
      ],
      "baselineStart": [
        1.453125,
        24.0,
        9.567708333333332
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        22.75,
        9.567708333333332
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S175",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        1.453125,
        24.0,
        14.432291666666666
      ],
      "baselineStart": [
        1.453125,
        24.0,
        14.432291666666666
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        22.75,
        14.432291666666666
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S176",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        1.453125,
        24.0,
        19.296875
      ],
      "baselineStart": [
        1.453125,
        24.0,
        19.296875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.453125,
        22.75,
        19.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CLU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S177",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        46.546875,
        24.0,
        4.703125
      ],
      "baselineStart": [
        46.546875,
        24.0,
        4.703125
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        22.75,
        4.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S178",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        46.546875,
        24.0,
        9.567708333333332
      ],
      "baselineStart": [
        46.546875,
        24.0,
        9.567708333333332
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        22.75,
        9.567708333333332
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S179",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        46.546875,
        24.0,
        14.432291666666666
      ],
      "baselineStart": [
        46.546875,
        24.0,
        14.432291666666666
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        22.75,
        14.432291666666666
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S180",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 13,
      "group": "body",
      "use": "back to upright",
      "installStep": 13,
      "start": [
        46.546875,
        24.0,
        19.296875
      ],
      "baselineStart": [
        46.546875,
        24.0,
        19.296875
      ],
      "sku": "W125",
      "stage": 13,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.546875,
        22.75,
        19.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CRU",
      "through": [
        "P04"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S181",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        1.953125,
        1.5,
        1.703125
      ],
      "baselineStart": [
        1.953125,
        1.5,
        1.703125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.953125,
        0.25,
        1.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S182",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        1.953125,
        1.5,
        5.821875
      ],
      "baselineStart": [
        1.953125,
        1.5,
        5.821875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.953125,
        0.25,
        5.821875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "F1L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S183",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        1.953125,
        1.5,
        9.940625
      ],
      "baselineStart": [
        1.953125,
        1.5,
        9.940625
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.953125,
        0.25,
        9.940625
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "F1L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S184",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        1.953125,
        1.5,
        14.059375
      ],
      "baselineStart": [
        1.953125,
        1.5,
        14.059375
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.953125,
        0.25,
        14.059375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "F1L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S185",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        1.953125,
        1.5,
        18.178125
      ],
      "baselineStart": [
        1.953125,
        1.5,
        18.178125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.953125,
        0.25,
        18.178125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "F1L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S186",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        1.953125,
        1.5,
        22.296875
      ],
      "baselineStart": [
        1.953125,
        1.5,
        22.296875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        1.953125,
        0.25,
        22.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0L",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S187",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24,
        1.5,
        1.703125
      ],
      "baselineStart": [
        24,
        1.5,
        1.703125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        1.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S188",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24,
        1.5,
        5.621875
      ],
      "baselineStart": [
        24,
        1.5,
        5.621875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        5.621875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0C",
      "through": [
        "F1C"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S189",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24,
        1.5,
        9.540625
      ],
      "baselineStart": [
        24,
        1.5,
        9.540625
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        9.540625
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0C",
      "through": [
        "F1C"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S190",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24,
        1.5,
        13.459375
      ],
      "baselineStart": [
        24,
        1.5,
        13.459375
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        13.459375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0C",
      "through": [
        "F1C"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S191",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24,
        1.5,
        17.378125
      ],
      "baselineStart": [
        24,
        1.5,
        17.378125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        17.378125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0C",
      "through": [
        "F1C"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S192",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24,
        1.5,
        21.296875
      ],
      "baselineStart": [
        24,
        1.5,
        21.296875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        21.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S193",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        46.046875,
        1.5,
        1.703125
      ],
      "baselineStart": [
        46.046875,
        1.5,
        1.703125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.046875,
        0.25,
        1.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S194",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        46.046875,
        1.5,
        5.821875
      ],
      "baselineStart": [
        46.046875,
        1.5,
        5.821875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.046875,
        0.25,
        5.821875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "F1R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S195",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        46.046875,
        1.5,
        9.940625
      ],
      "baselineStart": [
        46.046875,
        1.5,
        9.940625
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.046875,
        0.25,
        9.940625
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "F1R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S196",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        46.046875,
        1.5,
        14.059375
      ],
      "baselineStart": [
        46.046875,
        1.5,
        14.059375
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.046875,
        0.25,
        14.059375
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "F1R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S197",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        46.046875,
        1.5,
        18.178125
      ],
      "baselineStart": [
        46.046875,
        1.5,
        18.178125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.046875,
        0.25,
        18.178125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "F1R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S198",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        46.046875,
        1.5,
        22.296875
      ],
      "baselineStart": [
        46.046875,
        1.5,
        22.296875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        46.046875,
        0.25,
        22.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0R",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S199",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        4.703125,
        1.5,
        2.453125
      ],
      "baselineStart": [
        4.703125,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        4.703125,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S200",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        9.52734375,
        1.5,
        2.453125
      ],
      "baselineStart": [
        9.52734375,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        9.52734375,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S201",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        14.3515625,
        1.5,
        2.453125
      ],
      "baselineStart": [
        14.3515625,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        14.3515625,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S202",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        19.17578125,
        1.5,
        2.453125
      ],
      "baselineStart": [
        19.17578125,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        19.17578125,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S203",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24.0,
        1.5,
        2.453125
      ],
      "baselineStart": [
        24.0,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S204",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        28.82421875,
        1.5,
        2.453125
      ],
      "baselineStart": [
        28.82421875,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        28.82421875,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S205",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        33.6484375,
        1.5,
        2.453125
      ],
      "baselineStart": [
        33.6484375,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        33.6484375,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S206",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        38.47265625,
        1.5,
        2.453125
      ],
      "baselineStart": [
        38.47265625,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        38.47265625,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S207",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        43.296875,
        1.5,
        2.453125
      ],
      "baselineStart": [
        43.296875,
        1.5,
        2.453125
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        43.296875,
        0.25,
        2.453125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S208",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        4.703125,
        1.5,
        22.046875
      ],
      "baselineStart": [
        4.703125,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        4.703125,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S209",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        9.52734375,
        1.5,
        22.046875
      ],
      "baselineStart": [
        9.52734375,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        9.52734375,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S210",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        14.3515625,
        1.5,
        22.046875
      ],
      "baselineStart": [
        14.3515625,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        14.3515625,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S211",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        19.17578125,
        1.5,
        22.046875
      ],
      "baselineStart": [
        19.17578125,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        19.17578125,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S212",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        24.0,
        1.5,
        22.046875
      ],
      "baselineStart": [
        24.0,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S213",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        28.82421875,
        1.5,
        22.046875
      ],
      "baselineStart": [
        28.82421875,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        28.82421875,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S214",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        33.6484375,
        1.5,
        22.046875
      ],
      "baselineStart": [
        33.6484375,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        33.6484375,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S215",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        38.47265625,
        1.5,
        22.046875
      ],
      "baselineStart": [
        38.47265625,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        38.47265625,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S216",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "frame lamination",
      "installStep": 14,
      "start": [
        43.296875,
        1.5,
        22.046875
      ],
      "baselineStart": [
        43.296875,
        1.5,
        22.046875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        43.296875,
        0.25,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0T",
      "through": [
        "F1T"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S217",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        4.703125,
        0.65,
        0
      ],
      "baselineStart": [
        4.703125,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        4.703125,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S218",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        9.52734375,
        0.65,
        0
      ],
      "baselineStart": [
        9.52734375,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        9.52734375,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S219",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        14.3515625,
        0.65,
        0
      ],
      "baselineStart": [
        14.3515625,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        14.3515625,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S220",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        19.17578125,
        0.65,
        0
      ],
      "baselineStart": [
        19.17578125,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        19.17578125,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S221",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        24.0,
        0.65,
        0
      ],
      "baselineStart": [
        24.0,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S222",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        28.82421875,
        0.65,
        0
      ],
      "baselineStart": [
        28.82421875,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        28.82421875,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S223",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        33.6484375,
        0.65,
        0
      ],
      "baselineStart": [
        33.6484375,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        33.6484375,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S224",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        38.47265625,
        0.65,
        0
      ],
      "baselineStart": [
        38.47265625,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        38.47265625,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S225",
      "axis": [
        0,
        0,
        1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "floor to front sill",
      "installStep": 14,
      "start": [
        43.296875,
        0.65,
        0
      ],
      "baselineStart": [
        43.296875,
        0.65,
        0
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        43.296875,
        0.65,
        1.25
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F0B",
      "through": [
        "P01"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S226",
      "axis": [
        0,
        1,
        0
      ],
      "length": 2,
      "step": 14,
      "group": "body",
      "use": "front to bearing column",
      "installStep": 14,
      "start": [
        24,
        0,
        2.703125
      ],
      "baselineStart": [
        24,
        0,
        2.703125
      ],
      "sku": "W200",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24,
        2,
        2.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CC",
      "through": [
        "F0B",
        "F1B"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S227",
      "axis": [
        0,
        1,
        0
      ],
      "length": 2,
      "step": 14,
      "group": "body",
      "use": "front to bearing column",
      "installStep": 14,
      "start": [
        24,
        0,
        7.703125
      ],
      "baselineStart": [
        24,
        0,
        7.703125
      ],
      "sku": "W200",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24,
        2,
        7.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CC",
      "through": [
        "F0C",
        "F1C"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S228",
      "axis": [
        0,
        1,
        0
      ],
      "length": 2,
      "step": 14,
      "group": "body",
      "use": "front to bearing column",
      "installStep": 14,
      "start": [
        24,
        0,
        12.703125
      ],
      "baselineStart": [
        24,
        0,
        12.703125
      ],
      "sku": "W200",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24,
        2,
        12.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CC",
      "through": [
        "F0C",
        "F1C"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S229",
      "axis": [
        0,
        1,
        0
      ],
      "length": 2,
      "step": 14,
      "group": "body",
      "use": "front to bearing column",
      "installStep": 14,
      "start": [
        24,
        0,
        17.703125
      ],
      "baselineStart": [
        24,
        0,
        17.703125
      ],
      "sku": "W200",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24,
        2,
        17.703125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CC",
      "through": [
        "F0C",
        "F1C"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S230",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        3.015625,
        1.875,
        5.328125
      ],
      "baselineStart": [
        3.015625,
        1.875,
        5.328125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        3.015625,
        0.875,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1L",
      "through": [
        "STLH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S231",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        3.015625,
        1.875,
        10.109375
      ],
      "baselineStart": [
        3.015625,
        1.875,
        10.109375
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        3.015625,
        0.875,
        10.109375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1L",
      "through": [
        "STLH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S232",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        3.015625,
        1.875,
        14.890625
      ],
      "baselineStart": [
        3.015625,
        1.875,
        14.890625
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        3.015625,
        0.875,
        14.890625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1L",
      "through": [
        "STLH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S233",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        3.015625,
        1.875,
        19.671875
      ],
      "baselineStart": [
        3.015625,
        1.875,
        19.671875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        3.015625,
        0.875,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1L",
      "through": [
        "STLH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S234",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        22.9375,
        1.875,
        5.328125
      ],
      "baselineStart": [
        22.9375,
        1.875,
        5.328125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        22.9375,
        0.875,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STLJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S235",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        22.9375,
        1.875,
        10.109375
      ],
      "baselineStart": [
        22.9375,
        1.875,
        10.109375
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        22.9375,
        0.875,
        10.109375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STLJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S236",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        22.9375,
        1.875,
        14.890625
      ],
      "baselineStart": [
        22.9375,
        1.875,
        14.890625
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        22.9375,
        0.875,
        14.890625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STLJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S237",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        22.9375,
        1.875,
        19.671875
      ],
      "baselineStart": [
        22.9375,
        1.875,
        19.671875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        22.9375,
        0.875,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STLJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S238",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        5.078125,
        1.875,
        4.078125
      ],
      "baselineStart": [
        5.078125,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        5.078125,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S239",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        9.02734375,
        1.875,
        4.078125
      ],
      "baselineStart": [
        9.02734375,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        9.02734375,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S240",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        12.9765625,
        1.875,
        4.078125
      ],
      "baselineStart": [
        12.9765625,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        12.9765625,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S241",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        16.92578125,
        1.875,
        4.078125
      ],
      "baselineStart": [
        16.92578125,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        16.92578125,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S242",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        20.875,
        1.875,
        4.078125
      ],
      "baselineStart": [
        20.875,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        20.875,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STLB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S243",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        5.078125,
        1.875,
        20.921875
      ],
      "baselineStart": [
        5.078125,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        5.078125,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S244",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        9.02734375,
        1.875,
        20.921875
      ],
      "baselineStart": [
        9.02734375,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        9.02734375,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S245",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        12.9765625,
        1.875,
        20.921875
      ],
      "baselineStart": [
        12.9765625,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        12.9765625,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S246",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        16.92578125,
        1.875,
        20.921875
      ],
      "baselineStart": [
        16.92578125,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        16.92578125,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S247",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        20.875,
        1.875,
        20.921875
      ],
      "baselineStart": [
        20.875,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        20.875,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STLT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S248",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        44.984375,
        1.875,
        5.328125
      ],
      "baselineStart": [
        44.984375,
        1.875,
        5.328125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        44.984375,
        0.875,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1R",
      "through": [
        "STRH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S249",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        44.984375,
        1.875,
        10.109375
      ],
      "baselineStart": [
        44.984375,
        1.875,
        10.109375
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        44.984375,
        0.875,
        10.109375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1R",
      "through": [
        "STRH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S250",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        44.984375,
        1.875,
        14.890625
      ],
      "baselineStart": [
        44.984375,
        1.875,
        14.890625
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        44.984375,
        0.875,
        14.890625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1R",
      "through": [
        "STRH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S251",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        44.984375,
        1.875,
        19.671875
      ],
      "baselineStart": [
        44.984375,
        1.875,
        19.671875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        44.984375,
        0.875,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1R",
      "through": [
        "STRH"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S252",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        25.0625,
        1.875,
        5.328125
      ],
      "baselineStart": [
        25.0625,
        1.875,
        5.328125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        25.0625,
        0.875,
        5.328125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STRJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S253",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        25.0625,
        1.875,
        10.109375
      ],
      "baselineStart": [
        25.0625,
        1.875,
        10.109375
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        25.0625,
        0.875,
        10.109375
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STRJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S254",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        25.0625,
        1.875,
        14.890625
      ],
      "baselineStart": [
        25.0625,
        1.875,
        14.890625
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        25.0625,
        0.875,
        14.890625
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STRJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S255",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        25.0625,
        1.875,
        19.671875
      ],
      "baselineStart": [
        25.0625,
        1.875,
        19.671875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        25.0625,
        0.875,
        19.671875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1C",
      "through": [
        "STRJ"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S256",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        27.125,
        1.875,
        4.078125
      ],
      "baselineStart": [
        27.125,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        27.125,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S257",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        31.07421875,
        1.875,
        4.078125
      ],
      "baselineStart": [
        31.07421875,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        31.07421875,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S258",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        35.0234375,
        1.875,
        4.078125
      ],
      "baselineStart": [
        35.0234375,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        35.0234375,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S259",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        38.97265625,
        1.875,
        4.078125
      ],
      "baselineStart": [
        38.97265625,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        38.97265625,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S260",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        42.921875,
        1.875,
        4.078125
      ],
      "baselineStart": [
        42.921875,
        1.875,
        4.078125
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        42.921875,
        0.875,
        4.078125
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1B",
      "through": [
        "STRB"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S261",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        27.125,
        1.875,
        20.921875
      ],
      "baselineStart": [
        27.125,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        27.125,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S262",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        31.07421875,
        1.875,
        20.921875
      ],
      "baselineStart": [
        31.07421875,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        31.07421875,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S263",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        35.0234375,
        1.875,
        20.921875
      ],
      "baselineStart": [
        35.0234375,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        35.0234375,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S264",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        38.97265625,
        1.875,
        20.921875
      ],
      "baselineStart": [
        38.97265625,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        38.97265625,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S265",
      "axis": [
        0,
        -1,
        0
      ],
      "length": 1,
      "step": 15,
      "group": "body",
      "use": "door stop",
      "installStep": 15,
      "start": [
        42.921875,
        1.875,
        20.921875
      ],
      "baselineStart": [
        42.921875,
        1.875,
        20.921875
      ],
      "sku": "W100",
      "stage": 15,
      "door": null,
      "roof": false,
      "diameter": 0.138,
      "headDiameter": 0.25,
      "clearanceDiameter": 0.140625,
      "referencePilotDiameter": 0.09375,
      "end": [
        42.921875,
        0.875,
        20.921875
      ],
      "serviceSeatDiameter": 0.266,
      "receiver": "F1T",
      "through": [
        "STRT"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S266",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 1.25,
      "step": 14,
      "group": "body",
      "use": "rib rear half-lap",
      "installStep": 14,
      "start": [
        24,
        22.546875,
        23.296875
      ],
      "baselineStart": [
        24,
        22.546875,
        23.296875
      ],
      "sku": "W125",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24.0,
        22.546875,
        22.046875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CT",
      "through": [
        "CR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S267",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 14,
      "group": "body",
      "use": "rib front bearing",
      "installStep": 14,
      "start": [
        24,
        2.25,
        23.296875
      ],
      "baselineStart": [
        24,
        2.25,
        23.296875
      ],
      "sku": "W200",
      "stage": 14,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        24,
        2.25,
        21.296875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "CC",
      "through": [
        "CR"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S268",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        2.5456250000000002,
        -0.20500000000000002,
        5.858125
      ],
      "baselineStart": [
        2.5456250000000002,
        -0.08,
        5.858125
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        2.5456250000000002,
        1.295,
        5.858125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1L",
      "through": [
        "HL0left",
        "SP-HL0-left",
        "F0L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S269",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        2.325625,
        -0.20500000000000002,
        6.828125
      ],
      "baselineStart": [
        2.325625,
        -0.08,
        6.828125
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        2.325625,
        1.295,
        6.828125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1L",
      "through": [
        "HL0left",
        "SP-HL0-left",
        "F0L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S270",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        2.5456250000000002,
        -0.20500000000000002,
        7.798125
      ],
      "baselineStart": [
        2.5456250000000002,
        -0.08,
        7.798125
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        2.5456250000000002,
        1.295,
        7.798125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1L",
      "through": [
        "HL0left",
        "SP-HL0-left",
        "F0L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S271",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorL",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        3.9856249999999998,
        -0.20500000000000002,
        5.858125
      ],
      "baselineStart": [
        3.9856249999999998,
        -0.08,
        5.858125
      ],
      "sku": "W150",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.9856249999999998,
        1.295,
        5.858125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL1B",
      "through": [
        "HL0right",
        "SP-HL0-right",
        "DL0H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S272",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorL",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        4.2056249999999995,
        -0.20500000000000002,
        6.828125
      ],
      "baselineStart": [
        4.2056249999999995,
        -0.08,
        6.828125
      ],
      "sku": "W150",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        4.2056249999999995,
        1.295,
        6.828125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL1H",
      "through": [
        "HL0right",
        "SP-HL0-right",
        "DL0H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S273",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorL",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        3.9856249999999998,
        -0.20500000000000002,
        7.798125
      ],
      "baselineStart": [
        3.9856249999999998,
        -0.08,
        7.798125
      ],
      "sku": "W150",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.9856249999999998,
        1.295,
        7.798125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL1H",
      "through": [
        "HL0right",
        "SP-HL0-right",
        "DL0H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S274",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        2.5456250000000002,
        -0.20500000000000002,
        17.201875
      ],
      "baselineStart": [
        2.5456250000000002,
        -0.08,
        17.201875
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        2.5456250000000002,
        1.295,
        17.201875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1L",
      "through": [
        "HL1left",
        "SP-HL1-left",
        "F0L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S275",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        2.325625,
        -0.20500000000000002,
        18.171875
      ],
      "baselineStart": [
        2.325625,
        -0.08,
        18.171875
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        2.325625,
        1.295,
        18.171875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1L",
      "through": [
        "HL1left",
        "SP-HL1-left",
        "F0L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S276",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        2.5456250000000002,
        -0.20500000000000002,
        19.141875
      ],
      "baselineStart": [
        2.5456250000000002,
        -0.08,
        19.141875
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        2.5456250000000002,
        1.295,
        19.141875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1L",
      "through": [
        "HL1left",
        "SP-HL1-left",
        "F0L"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S277",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorL",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        3.9856249999999998,
        -0.20500000000000002,
        17.201875
      ],
      "baselineStart": [
        3.9856249999999998,
        -0.08,
        17.201875
      ],
      "sku": "W150",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.9856249999999998,
        1.295,
        17.201875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL1H",
      "through": [
        "HL1right",
        "SP-HL1-right",
        "DL0H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S278",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorL",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        4.2056249999999995,
        -0.20500000000000002,
        18.171875
      ],
      "baselineStart": [
        4.2056249999999995,
        -0.08,
        18.171875
      ],
      "sku": "W150",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        4.2056249999999995,
        1.295,
        18.171875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL1H",
      "through": [
        "HL1right",
        "SP-HL1-right",
        "DL0H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S279",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorL",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        3.9856249999999998,
        -0.20500000000000002,
        19.141875
      ],
      "baselineStart": [
        3.9856249999999998,
        -0.08,
        19.141875
      ],
      "sku": "W150",
      "stage": 17,
      "door": "L",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        3.9856249999999998,
        1.295,
        19.141875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DL1T",
      "through": [
        "HL1right",
        "SP-HL1-right",
        "DL0H"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S280",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorR",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        44.014375,
        -0.20500000000000002,
        5.858125
      ],
      "baselineStart": [
        44.014375,
        -0.08,
        5.858125
      ],
      "sku": "W150",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.014375,
        1.295,
        5.858125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR1B",
      "through": [
        "HR0left",
        "SP-HR0-left",
        "DR0J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S281",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorR",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        43.794375,
        -0.20500000000000002,
        6.828125
      ],
      "baselineStart": [
        43.794375,
        -0.08,
        6.828125
      ],
      "sku": "W150",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        43.794375,
        1.295,
        6.828125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR1J",
      "through": [
        "HR0left",
        "SP-HR0-left",
        "DR0J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S282",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorR",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        44.014375,
        -0.20500000000000002,
        7.798125
      ],
      "baselineStart": [
        44.014375,
        -0.08,
        7.798125
      ],
      "sku": "W150",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.014375,
        1.295,
        7.798125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR1J",
      "through": [
        "HR0left",
        "SP-HR0-left",
        "DR0J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S283",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        45.454375,
        -0.20500000000000002,
        5.858125
      ],
      "baselineStart": [
        45.454375,
        -0.08,
        5.858125
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        45.454375,
        1.295,
        5.858125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1R",
      "through": [
        "HR0right",
        "SP-HR0-right",
        "F0R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S284",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        45.674375,
        -0.20500000000000002,
        6.828125
      ],
      "baselineStart": [
        45.674375,
        -0.08,
        6.828125
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        45.674375,
        1.295,
        6.828125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1R",
      "through": [
        "HR0right",
        "SP-HR0-right",
        "F0R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S285",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        45.454375,
        -0.20500000000000002,
        7.798125
      ],
      "baselineStart": [
        45.454375,
        -0.08,
        7.798125
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        45.454375,
        1.295,
        7.798125
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1R",
      "through": [
        "HR0right",
        "SP-HR0-right",
        "F0R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S286",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorR",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        44.014375,
        -0.20500000000000002,
        17.201875
      ],
      "baselineStart": [
        44.014375,
        -0.08,
        17.201875
      ],
      "sku": "W150",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.014375,
        1.295,
        17.201875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR1J",
      "through": [
        "HR1left",
        "SP-HR1-left",
        "DR0J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S287",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorR",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        43.794375,
        -0.20500000000000002,
        18.171875
      ],
      "baselineStart": [
        43.794375,
        -0.08,
        18.171875
      ],
      "sku": "W150",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        43.794375,
        1.295,
        18.171875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR1J",
      "through": [
        "HR1left",
        "SP-HR1-left",
        "DR0J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S288",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "doorR",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        44.014375,
        -0.20500000000000002,
        19.141875
      ],
      "baselineStart": [
        44.014375,
        -0.08,
        19.141875
      ],
      "sku": "W150",
      "stage": 17,
      "door": "R",
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        44.014375,
        1.295,
        19.141875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "DR1T",
      "through": [
        "HR1left",
        "SP-HR1-left",
        "DR0J"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S289",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        45.454375,
        -0.20500000000000002,
        17.201875
      ],
      "baselineStart": [
        45.454375,
        -0.08,
        17.201875
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        45.454375,
        1.295,
        17.201875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1R",
      "through": [
        "HR1right",
        "SP-HR1-right",
        "F0R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S290",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        45.674375,
        -0.20500000000000002,
        18.171875
      ],
      "baselineStart": [
        45.674375,
        -0.08,
        18.171875
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        45.674375,
        1.295,
        18.171875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1R",
      "through": [
        "HR1right",
        "SP-HR1-right",
        "F0R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S291",
      "axis": [
        0,
        1,
        0
      ],
      "length": 1.5,
      "step": 17,
      "group": "body",
      "use": "surface hinge mounting",
      "installStep": 17,
      "start": [
        45.454375,
        -0.20500000000000002,
        19.141875
      ],
      "baselineStart": [
        45.454375,
        -0.08,
        19.141875
      ],
      "sku": "W150",
      "stage": 17,
      "door": null,
      "roof": false,
      "diameter": 0.164,
      "headDiameter": 0.32,
      "clearanceDiameter": 0.171875,
      "referencePilotDiameter": 0.109375,
      "end": [
        45.454375,
        1.295,
        19.141875
      ],
      "serviceSeatDiameter": 0.336,
      "receiver": "F1R",
      "through": [
        "HR1right",
        "SP-HR1-right",
        "F0R"
      ],
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S292",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "body",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "F0C",
      "through": [
        "L-HP-base"
      ],
      "actualPartTransfer": true,
      "start": [
        23.09875,
        -0.07,
        11
      ],
      "baselineStart": [
        23.13,
        -0.07,
        11
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": null,
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        23.09875,
        0.5549999999999999,
        11.0
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S293",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "body",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "F0C",
      "through": [
        "L-HP-base"
      ],
      "actualPartTransfer": true,
      "start": [
        23.46875,
        -0.07,
        11.5
      ],
      "baselineStart": [
        23.5,
        -0.07,
        11.5
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": null,
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        23.46875,
        0.5549999999999999,
        11.5
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S294",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "body",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "F0C",
      "through": [
        "L-HP-base"
      ],
      "actualPartTransfer": true,
      "start": [
        23.568749999999998,
        -0.07,
        10.5
      ],
      "baselineStart": [
        23.599999999999998,
        -0.07,
        10.5
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": null,
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        23.568749999999998,
        0.5549999999999999,
        10.5
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S295",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorL",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DL0J",
      "through": [
        "L-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        21.21875,
        -0.07,
        10.44
      ],
      "baselineStart": [
        21.25,
        -0.07,
        10.44
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "L",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        21.21875,
        0.5549999999999999,
        10.44
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S296",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorL",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DL0J",
      "through": [
        "L-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        22.33875,
        -0.07,
        10.44
      ],
      "baselineStart": [
        22.37,
        -0.07,
        10.44
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "L",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        22.33875,
        0.5549999999999999,
        10.44
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S297",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorL",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DL0J",
      "through": [
        "L-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        21.21875,
        -0.07,
        11.56
      ],
      "baselineStart": [
        21.25,
        -0.07,
        11.56
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "L",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        21.21875,
        0.5549999999999999,
        11.56
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S298",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorL",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DL0J",
      "through": [
        "L-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        22.33875,
        -0.07,
        11.56
      ],
      "baselineStart": [
        22.37,
        -0.07,
        11.56
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "L",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        22.33875,
        0.5549999999999999,
        11.56
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S299",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "body",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "F0C",
      "through": [
        "R-HP-base"
      ],
      "actualPartTransfer": true,
      "start": [
        24.901249999999997,
        -0.07,
        15
      ],
      "baselineStart": [
        24.869999999999997,
        -0.07,
        15
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": null,
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        24.901249999999997,
        0.5549999999999999,
        15.0
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S300",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "body",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "F0C",
      "through": [
        "R-HP-base"
      ],
      "actualPartTransfer": true,
      "start": [
        24.531249999999996,
        -0.07,
        15.5
      ],
      "baselineStart": [
        24.499999999999996,
        -0.07,
        15.5
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": null,
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        24.531249999999996,
        0.5549999999999999,
        15.5
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S301",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "body",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "F0C",
      "through": [
        "R-HP-base"
      ],
      "actualPartTransfer": true,
      "start": [
        24.43125,
        -0.07,
        14.5
      ],
      "baselineStart": [
        24.4,
        -0.07,
        14.5
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": null,
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        24.43125,
        0.5549999999999999,
        14.5
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S302",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorR",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DR0H",
      "through": [
        "R-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        26.781249999999996,
        -0.07,
        14.44
      ],
      "baselineStart": [
        26.749999999999996,
        -0.07,
        14.44
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "R",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        26.781249999999996,
        0.5549999999999999,
        14.44
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S303",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorR",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DR0H",
      "through": [
        "R-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        25.661249999999995,
        -0.07,
        14.44
      ],
      "baselineStart": [
        25.629999999999995,
        -0.07,
        14.44
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "R",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        25.661249999999995,
        0.5549999999999999,
        14.44
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S304",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorR",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DR0H",
      "through": [
        "R-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        26.781249999999996,
        -0.07,
        15.56
      ],
      "baselineStart": [
        26.749999999999996,
        -0.07,
        15.56
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "R",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        26.781249999999996,
        0.5549999999999999,
        15.56
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "S305",
      "axis": [
        0,
        1,
        0
      ],
      "length": 0.625,
      "diameter": 0.19,
      "headDiameter": 0.36,
      "step": 18,
      "installStep": 18,
      "group": "doorR",
      "use": "keyless hasp mounting",
      "product": "HASP-SCREW",
      "receiver": "DR0H",
      "through": [
        "R-ST-base"
      ],
      "actualPartTransfer": true,
      "start": [
        25.661249999999995,
        -0.07,
        15.56
      ],
      "baselineStart": [
        25.629999999999995,
        -0.07,
        15.56
      ],
      "sku": "HASP-SCREW",
      "stage": 18,
      "door": "R",
      "roof": false,
      "clearanceDiameter": 0.203125,
      "referencePilotDiameter": 0.125,
      "end": [
        25.661249999999995,
        0.5549999999999999,
        15.56
      ],
      "serviceSeatDiameter": 0.376,
      "pilotRule": "Transfer actual clamped receiver. Enlarge only through members. Stop receiver pilot including point; prove actual root/head on matched offcuts."
    },
    {
      "id": "B001",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        6.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        6.5,
        4.203125
      ],
      "start": [
        0,
        6.5,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        6.5,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B002",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        9.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        9.5,
        4.203125
      ],
      "start": [
        0,
        9.746,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        9.746,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B003",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        12.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        12.5,
        4.203125
      ],
      "start": [
        0,
        12.451,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        12.451,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B004",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        15.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        15.5,
        4.203125
      ],
      "start": [
        0,
        15.697000000000001,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        15.697000000000001,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B005",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        6.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        6.5,
        7.203125
      ],
      "start": [
        0,
        6.5,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        6.5,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B006",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        9.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        9.5,
        7.203125
      ],
      "start": [
        0,
        9.746,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        9.746,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B007",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        12.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        12.5,
        7.203125
      ],
      "start": [
        0,
        12.451,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        12.451,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B008",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        15.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        15.5,
        7.203125
      ],
      "start": [
        0,
        15.697000000000001,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        15.697000000000001,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B009",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        6.5,
        5.703125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        6.5,
        5.703125
      ],
      "start": [
        0,
        6.5,
        5.826125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLF"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        6.5,
        5.826125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B010",
      "axis": [
        1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        1.515625,
        15.5,
        5.703125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        1.578125,
        15.5,
        5.703125
      ],
      "start": [
        0,
        15.697000000000001,
        5.826125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03L",
        "ML",
        "VLA"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        2,
        15.697000000000001,
        5.826125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B011",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        6.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        6.5,
        4.203125
      ],
      "start": [
        48.0,
        6.5,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        6.5,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B012",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        9.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        9.5,
        4.203125
      ],
      "start": [
        48.0,
        9.746,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        9.746,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B013",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        12.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        12.5,
        4.203125
      ],
      "start": [
        48.0,
        12.451,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        12.451,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B014",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        15.5,
        4.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        15.5,
        4.203125
      ],
      "start": [
        48.0,
        15.697000000000001,
        4.203125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRB"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        15.697000000000001,
        4.203125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B015",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        6.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        6.5,
        7.203125
      ],
      "start": [
        48.0,
        6.5,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        6.5,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B016",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        9.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        9.5,
        7.203125
      ],
      "start": [
        48.0,
        9.746,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        9.746,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B017",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        12.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        12.5,
        7.203125
      ],
      "start": [
        48.0,
        12.451,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        12.451,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B018",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        15.5,
        7.203125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        15.5,
        7.203125
      ],
      "start": [
        48.0,
        15.697000000000001,
        7.449125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRT"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        15.697000000000001,
        7.449125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B019",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        6.5,
        5.703125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        6.5,
        5.703125
      ],
      "start": [
        48.0,
        6.5,
        5.826125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRF"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        6.5,
        5.826125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B020",
      "axis": [
        -1,
        0,
        0
      ],
      "length": 2,
      "step": 10,
      "group": "body",
      "use": "side vent capture",
      "woodEntry": [
        46.484375,
        15.5,
        5.703125
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 12,
      "baselineStart": [
        46.421875,
        15.5,
        5.703125
      ],
      "start": [
        48.0,
        15.697000000000001,
        5.826125
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P03R",
        "MR",
        "VRA"
      ],
      "purchasedLength": 2,
      "stage": 10,
      "door": null,
      "roof": false,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        46.0,
        15.697000000000001,
        5.826125
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B021",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        3.5,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        3.5,
        5.5,
        23.234375
      ],
      "start": [
        3.5,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        3.5,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B022",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        7.3,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        7.3,
        5.5,
        23.234375
      ],
      "start": [
        7.287000000000001,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        7.287000000000001,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B023",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        11.1,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "capturesSupport": "LB1",
      "baselineStart": [
        11.1,
        5.5,
        23.234375
      ],
      "start": [
        11.074000000000002,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "LB1",
        "RTLF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        11.074000000000002,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B024",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        14.9,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "capturesSupport": "LB2",
      "baselineStart": [
        14.9,
        5.5,
        23.234375
      ],
      "start": [
        14.861,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "LB2",
        "RTLF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        14.861,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B025",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        18.7,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        18.7,
        5.5,
        23.234375
      ],
      "start": [
        18.648000000000003,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        18.648000000000003,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B026",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        22.5,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        22.5,
        5.5,
        23.234375
      ],
      "start": [
        22.435000000000002,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        22.435000000000002,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B027",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        3.5,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        3.5,
        18.5,
        23.234375
      ],
      "start": [
        3.5,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        3.5,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B028",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        7.3,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        7.3,
        18.5,
        23.234375
      ],
      "start": [
        7.287000000000001,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        7.287000000000001,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B029",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        11.1,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "capturesSupport": "LB1",
      "baselineStart": [
        11.1,
        18.5,
        23.234375
      ],
      "start": [
        11.074000000000002,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "LB1",
        "RTLA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        11.074000000000002,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B030",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        14.9,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "capturesSupport": "LB2",
      "baselineStart": [
        14.9,
        18.5,
        23.234375
      ],
      "start": [
        14.861,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "LB2",
        "RTLA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        14.861,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B031",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        18.7,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        18.7,
        18.5,
        23.234375
      ],
      "start": [
        18.648000000000003,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        18.648000000000003,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B032",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        22.5,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        22.5,
        18.5,
        23.234375
      ],
      "start": [
        22.435000000000002,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        22.435000000000002,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B033",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        3.5,
        9,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        3.5,
        9.0,
        23.234375
      ],
      "start": [
        3.5,
        8.746,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLL"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        3.5,
        8.746,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B034",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        3.5,
        12,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        3.5,
        12.0,
        23.234375
      ],
      "start": [
        3.5,
        11.992,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLL"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        3.5,
        11.992,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B035",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        3.5,
        15,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        3.5,
        15.0,
        23.234375
      ],
      "start": [
        3.5,
        15.238000000000001,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLL"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        3.5,
        15.238000000000001,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B036",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        22.5,
        9,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        22.5,
        9.0,
        23.234375
      ],
      "start": [
        22.435000000000002,
        8.746,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLR"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        22.435000000000002,
        8.746,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B037",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        22.5,
        12,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        22.5,
        12.0,
        23.234375
      ],
      "start": [
        22.435000000000002,
        11.992,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLR"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        22.435000000000002,
        11.992,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B038",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        22.5,
        15,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        22.5,
        15.0,
        23.234375
      ],
      "start": [
        22.435000000000002,
        15.238000000000001,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTL",
        "RTLR"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        22.435000000000002,
        15.238000000000001,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B039",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        25.5,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        25.5,
        5.5,
        23.234375
      ],
      "start": [
        25.5,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        25.5,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B040",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        29.3,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        29.3,
        5.5,
        23.234375
      ],
      "start": [
        29.287,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        29.287,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B041",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        33.1,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        33.1,
        5.5,
        23.234375
      ],
      "start": [
        33.074,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        33.074,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B042",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        36.9,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        36.9,
        5.5,
        23.234375
      ],
      "start": [
        36.861000000000004,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        36.861000000000004,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B043",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        40.7,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        40.7,
        5.5,
        23.234375
      ],
      "start": [
        40.648,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        40.648,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B044",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        44.5,
        5.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        44.5,
        5.5,
        23.234375
      ],
      "start": [
        44.435,
        5.5,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRF"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        44.435,
        5.5,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B045",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        25.5,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        25.5,
        18.5,
        23.234375
      ],
      "start": [
        25.5,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        25.5,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B046",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        29.3,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        29.3,
        18.5,
        23.234375
      ],
      "start": [
        29.287,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        29.287,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B047",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        33.1,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        33.1,
        18.5,
        23.234375
      ],
      "start": [
        33.074,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        33.074,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B048",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        36.9,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        36.9,
        18.5,
        23.234375
      ],
      "start": [
        36.861000000000004,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        36.861000000000004,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B049",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        40.7,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        40.7,
        18.5,
        23.234375
      ],
      "start": [
        40.648,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        40.648,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B050",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        44.5,
        18.5,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        44.5,
        18.5,
        23.234375
      ],
      "start": [
        44.435,
        18.484,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRA"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        44.435,
        18.484,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B051",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        25.5,
        9,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        25.5,
        9.0,
        23.234375
      ],
      "start": [
        25.5,
        8.746,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRL"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        25.5,
        8.746,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B052",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        25.5,
        12,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        25.5,
        12.0,
        23.234375
      ],
      "start": [
        25.5,
        11.992,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRL"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        25.5,
        11.992,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B053",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        25.5,
        15,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        25.5,
        15.0,
        23.234375
      ],
      "start": [
        25.5,
        15.238000000000001,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRL"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        25.5,
        15.238000000000001,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B054",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        44.5,
        9,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        44.5,
        9.0,
        23.234375
      ],
      "start": [
        44.435,
        8.746,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRR"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        44.435,
        8.746,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B055",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        44.5,
        12,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        44.5,
        12.0,
        23.234375
      ],
      "start": [
        44.435,
        11.992,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRR"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        44.435,
        11.992,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    },
    {
      "id": "B056",
      "axis": [
        0,
        0,
        -1
      ],
      "length": 2,
      "step": 16,
      "group": "roof",
      "use": "roof mesh capture",
      "woodEntry": [
        44.5,
        15,
        23.296875
      ],
      "washerThickness": 0.0625,
      "washerOuterDiameter": 0.625,
      "washerInnerDiameter": 0.28125,
      "meshStandOff": 0.0625,
      "nominalGrip": 1.640625,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capOutsideDiameter": 0.5,
      "capModel": "MonsterFastener36785",
      "catalogCapDepth": 0.5,
      "lengthBasis": "2-inch stock; actual cut length from finished grip, engagement and bottom-clearance rule",
      "installStep": 16,
      "baselineStart": [
        44.5,
        15.0,
        23.234375
      ],
      "start": [
        44.435,
        15.238000000000001,
        24.0
      ],
      "sku": "BOLT",
      "receiver": null,
      "through": [
        "P02",
        "MTR",
        "RTRR"
      ],
      "purchasedLength": 2,
      "stage": 16,
      "door": null,
      "roof": true,
      "grip": 1.453125,
      "referencePilotDiameter": null,
      "serviceSeatDiameter": 0.5,
      "diameter": 0.25,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "nutHeight": 0.313,
      "nutAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "end": [
        44.435,
        15.238000000000001,
        22.0
      ],
      "tail": 0.171375,
      "fitNote": "Flush exterior head in bare wood, one inside washer and locknut, separate closed cover. Fit removed screw to actual stack plus 1/8–7/32-inch tail; preserve two complete threads after chamfer and 1/32-inch unused blind depth. Reference 2-inch length is not a universal trim setting."
    }
  ],
  "cuts": [
    {
      "id": "P01",
      "name": "Floor",
      "material": "plywood",
      "quantity": 1,
      "length": 48.0,
      "width": 24.0,
      "thickness": 0.703125,
      "roughLength": 48.125,
      "roughWidth": 24.0,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "P02",
      "name": "Roof",
      "material": "plywood",
      "quantity": 1,
      "length": 48.0,
      "width": 24.0,
      "thickness": 0.703125,
      "roughLength": 48.125,
      "roughWidth": 24.0,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [
        "P02-cut-1",
        "P02-cut-2"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "P03L",
      "name": "Side panel L",
      "material": "plywood",
      "quantity": 1,
      "length": 24.0,
      "width": 22.59375,
      "thickness": 0.703125,
      "roughLength": 24.125,
      "roughWidth": 22.59375,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [
        "P03L-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "P03R",
      "name": "Side panel R",
      "material": "plywood",
      "quantity": 1,
      "length": 24.0,
      "width": 22.59375,
      "thickness": 0.703125,
      "roughLength": 24.125,
      "roughWidth": 22.59375,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [
        "P03R-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "P04",
      "name": "Back",
      "material": "plywood",
      "quantity": 1,
      "length": 46.59375,
      "width": 22.59375,
      "thickness": 0.703125,
      "roughLength": 46.71875,
      "roughWidth": 22.59375,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F0L",
      "name": "Front frame stile",
      "material": "pine",
      "quantity": 1,
      "length": 22.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 22.71875,
      "roughWidth": 2.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F0R",
      "name": "Front frame stile",
      "material": "pine",
      "quantity": 1,
      "length": 22.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 22.71875,
      "roughWidth": 2.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F0B",
      "name": "Front frame rail",
      "material": "pine",
      "quantity": 1,
      "length": 41.59375,
      "width": 3.5,
      "thickness": 0.75,
      "roughLength": 41.71875,
      "roughWidth": 3.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F0T",
      "name": "Front frame rail",
      "material": "pine",
      "quantity": 1,
      "length": 41.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 41.71875,
      "roughWidth": 2.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F0C",
      "name": "Centre stile",
      "material": "pine",
      "quantity": 1,
      "length": 16.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 16.71875,
      "roughWidth": 2.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F1L",
      "name": "Front frame stile",
      "material": "pine",
      "quantity": 1,
      "length": 16.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 16.71875,
      "roughWidth": 2.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F1R",
      "name": "Front frame stile",
      "material": "pine",
      "quantity": 1,
      "length": 16.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 16.71875,
      "roughWidth": 2.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F1B",
      "name": "Front frame rail",
      "material": "pine",
      "quantity": 1,
      "length": 46.59375,
      "width": 3.5,
      "thickness": 0.75,
      "roughLength": 46.71875,
      "roughWidth": 3.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F1T",
      "name": "Front frame rail",
      "material": "pine",
      "quantity": 1,
      "length": 46.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 46.71875,
      "roughWidth": 2.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "F1C",
      "name": "Centre stile",
      "material": "pine",
      "quantity": 1,
      "length": 16.59375,
      "width": 2.5,
      "thickness": 0.75,
      "roughLength": 16.71875,
      "roughWidth": 2.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL0H",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 16.34375,
      "roughWidth": 1.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL0J",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.96875,
      "thickness": 0.75,
      "roughLength": 16.34375,
      "roughWidth": 1.96875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL0B",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 15.671875,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL0T",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 15.671875,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL1H",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 12.84375,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 12.96875,
      "roughWidth": 1.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL1J",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 12.84375,
      "width": 1.96875,
      "thickness": 0.75,
      "roughLength": 12.96875,
      "roughWidth": 1.96875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL1B",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 19.203125,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 19.328125,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DL1T",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 19.203125,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 19.328125,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "AL",
      "name": "Captured acrylic pane",
      "material": "acrylic",
      "quantity": 1,
      "length": 16.296875,
      "width": 13.59375,
      "thickness": 0.22,
      "roughLength": 16.296875,
      "roughWidth": 13.59375,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GLL",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 14.96875,
      "roughWidth": 0.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GLR",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 14.96875,
      "roughWidth": 0.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GLB",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 16.546875,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 16.671875,
      "roughWidth": 0.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GLT",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 16.546875,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 16.671875,
      "roughWidth": 0.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KLL",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 14.96875,
      "roughWidth": 0.875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KLR",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 14.96875,
      "roughWidth": 0.875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KLB",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 15.796875,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 15.921875,
      "roughWidth": 0.875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KLT",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 15.796875,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 15.921875,
      "roughWidth": 0.875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLfB",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLfT",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLfL",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLfR",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLrB",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLrT",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLrL",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADLrR",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STLH",
      "name": "Door side stop",
      "material": "pine",
      "quantity": 1,
      "length": 16.34375,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 16.46875,
      "roughWidth": 0.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STLJ",
      "name": "Door side stop",
      "material": "pine",
      "quantity": 1,
      "length": 16.34375,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 16.46875,
      "roughWidth": 0.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STLB",
      "name": "Door horizontal stop",
      "material": "pine",
      "quantity": 1,
      "length": 17.796875,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 17.921875,
      "roughWidth": 0.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STLT",
      "name": "Door horizontal stop",
      "material": "pine",
      "quantity": 1,
      "length": 17.796875,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 17.921875,
      "roughWidth": 0.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR0H",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.96875,
      "thickness": 0.75,
      "roughLength": 16.34375,
      "roughWidth": 1.96875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR0J",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 16.34375,
      "roughWidth": 1.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR0B",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 15.671875,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR0T",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 15.671875,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR1H",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 12.84375,
      "width": 1.96875,
      "thickness": 0.75,
      "roughLength": 12.96875,
      "roughWidth": 1.96875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR1J",
      "name": "Door stile lamina",
      "material": "pine",
      "quantity": 1,
      "length": 12.84375,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 12.96875,
      "roughWidth": 1.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR1B",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 19.203125,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 19.328125,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "DR1T",
      "name": "Door rail lamina",
      "material": "pine",
      "quantity": 1,
      "length": 19.203125,
      "width": 1.6875,
      "thickness": 0.75,
      "roughLength": 19.328125,
      "roughWidth": 1.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "AR",
      "name": "Captured acrylic pane",
      "material": "acrylic",
      "quantity": 1,
      "length": 16.296875,
      "width": 13.59375,
      "thickness": 0.22,
      "roughLength": 16.296875,
      "roughWidth": 13.59375,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GRL",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 14.96875,
      "roughWidth": 0.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GRR",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 14.96875,
      "roughWidth": 0.5,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GRB",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 16.546875,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 16.671875,
      "roughWidth": 0.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "GRT",
      "name": "Glazing spacer",
      "material": "pine",
      "quantity": 1,
      "length": 16.546875,
      "width": 0.5,
      "thickness": 0.34375,
      "roughLength": 16.671875,
      "roughWidth": 0.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KRL",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 14.96875,
      "roughWidth": 0.875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KRR",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 14.84375,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 14.96875,
      "roughWidth": 0.875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KRB",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 15.796875,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 15.921875,
      "roughWidth": 0.875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "KRT",
      "name": "Glazing cap",
      "material": "pine",
      "quantity": 1,
      "length": 15.796875,
      "width": 0.875,
      "thickness": 0.25,
      "roughLength": 15.921875,
      "roughWidth": 0.875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRfB",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRfT",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRfL",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRfR",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRrB",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRrT",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 16.296875,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 16.296875,
      "roughWidth": 0.25,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRrL",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "PADRrR",
      "name": "Neoprene face pad",
      "material": "rubber",
      "quantity": 1,
      "length": 13.09375,
      "width": 0.25,
      "thickness": 0.0625,
      "roughLength": 13.09375,
      "roughWidth": 0.25,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STRH",
      "name": "Door side stop",
      "material": "pine",
      "quantity": 1,
      "length": 16.34375,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 16.46875,
      "roughWidth": 0.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STRJ",
      "name": "Door side stop",
      "material": "pine",
      "quantity": 1,
      "length": 16.34375,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 16.46875,
      "roughWidth": 0.6875,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STRB",
      "name": "Door horizontal stop",
      "material": "pine",
      "quantity": 1,
      "length": 17.796875,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 17.921875,
      "roughWidth": 0.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "STRT",
      "name": "Door horizontal stop",
      "material": "pine",
      "quantity": 1,
      "length": 17.796875,
      "width": 0.6875,
      "thickness": 0.375,
      "roughLength": 17.921875,
      "roughWidth": 0.6875,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "ML",
      "name": "Side vent screen",
      "material": "mesh",
      "quantity": 1,
      "length": 9.5,
      "width": 3.5,
      "thickness": 0.082,
      "roughLength": 9.5,
      "roughWidth": 3.5,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VLB",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 10,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 10.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [
        "VLB-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VLT",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 10,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 10.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [
        "VLT-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VLF",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 2,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 2.125,
      "roughWidth": 1,
      "grainAxis": 2,
      "normalAxis": 0,
      "subsequentMachining": [
        "VLF-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VLA",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 2,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 2.125,
      "roughWidth": 1,
      "grainAxis": 2,
      "normalAxis": 0,
      "subsequentMachining": [
        "VLA-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "MR",
      "name": "Side vent screen",
      "material": "mesh",
      "quantity": 1,
      "length": 9.5,
      "width": 3.5,
      "thickness": 0.082,
      "roughLength": 9.5,
      "roughWidth": 3.5,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VRB",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 10,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 10.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [
        "VRB-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VRT",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 10,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 10.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [
        "VRT-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VRF",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 2,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 2.125,
      "roughWidth": 1,
      "grainAxis": 2,
      "normalAxis": 0,
      "subsequentMachining": [
        "VRF-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "VRA",
      "name": "Side vent edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 2,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 2.125,
      "roughWidth": 1,
      "grainAxis": 2,
      "normalAxis": 0,
      "subsequentMachining": [
        "VRA-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "MTL",
      "name": "Roof screen",
      "material": "mesh",
      "quantity": 1,
      "length": 19.5,
      "width": 13.5,
      "thickness": 0.082,
      "roughLength": 19.5,
      "roughWidth": 13.5,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTLF",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 20,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 20.125,
      "roughWidth": 1,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTLF-cut-1",
        "RTLF-cut-2",
        "RTLF-cut-3"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTLA",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 20,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 20.125,
      "roughWidth": 1,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTLA-cut-1",
        "RTLA-cut-2",
        "RTLA-cut-3"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTLL",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 12,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 12.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTLL-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTLR",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 12,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 12.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTLR-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "MTR",
      "name": "Roof screen",
      "material": "mesh",
      "quantity": 1,
      "length": 19.5,
      "width": 13.5,
      "thickness": 0.082,
      "roughLength": 19.5,
      "roughWidth": 13.5,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTRF",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 20,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 20.125,
      "roughWidth": 1,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTRF-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTRA",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 20,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 20.125,
      "roughWidth": 1,
      "grainAxis": 0,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTRA-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTRL",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 12,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 12.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTRL-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "RTRR",
      "name": "Roof screen edge batten",
      "material": "pine",
      "quantity": 1,
      "length": 12,
      "width": 1,
      "thickness": 0.75,
      "roughLength": 12.125,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 2,
      "subsequentMachining": [
        "RTRR-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CLB",
      "name": "Side floor cleat — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 21.796875,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 21.921875,
      "roughWidth": 1.5,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CLU",
      "name": "Rear upright — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 19.59375,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 19.71875,
      "roughWidth": 1.5,
      "grainAxis": 2,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CLT",
      "name": "Side roof ledger — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 21.796875,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 21.921875,
      "roughWidth": 1.5,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CRB",
      "name": "Side floor cleat — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 21.796875,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 21.921875,
      "roughWidth": 1.5,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CRU",
      "name": "Rear upright — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 19.59375,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 19.71875,
      "roughWidth": 1.5,
      "grainAxis": 2,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CRT",
      "name": "Side roof ledger — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 21.796875,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 21.921875,
      "roughWidth": 1.5,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CB",
      "name": "Rear floor cleat — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 43.59375,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 43.71875,
      "roughWidth": 1.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CT",
      "name": "Rear roof ledger — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 43.59375,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 43.71875,
      "roughWidth": 1.5,
      "grainAxis": 0,
      "normalAxis": 1,
      "subsequentMachining": [
        "CT-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CC",
      "name": "Centre bearing — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 21.09375,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 21.21875,
      "roughWidth": 1.5,
      "grainAxis": 2,
      "normalAxis": 0,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "CR",
      "name": "Roof centre rib — solid stock",
      "material": "pine",
      "quantity": 1,
      "length": 21.796875,
      "width": 1.5,
      "thickness": 1.5,
      "roughLength": 21.921875,
      "roughWidth": 1.5,
      "grainAxis": 1,
      "normalAxis": 0,
      "subsequentMachining": [
        "CR-cut-1"
      ],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "LB1",
      "name": "Steel strip beneath left lamp area",
      "material": "steel",
      "quantity": 1,
      "length": 14,
      "width": 1,
      "thickness": 0.125,
      "roughLength": 14,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 2,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "LB2",
      "name": "Steel strip beneath left lamp area",
      "material": "steel",
      "quantity": 1,
      "length": 14,
      "width": 1,
      "thickness": 0.125,
      "roughLength": 14,
      "roughWidth": 1,
      "grainAxis": 1,
      "normalAxis": 2,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HL0-left",
      "name": "Full hinge bearing spacer HL0 left",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HL0-right",
      "name": "Full hinge bearing spacer HL0 right",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HL1-left",
      "name": "Full hinge bearing spacer HL1 left",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HL1-right",
      "name": "Full hinge bearing spacer HL1 right",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HR0-left",
      "name": "Full hinge bearing spacer HR0 left",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HR0-right",
      "name": "Full hinge bearing spacer HR0 right",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HR1-left",
      "name": "Full hinge bearing spacer HR1 left",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "SP-HR1-right",
      "name": "Full hinge bearing spacer HR1 right",
      "material": "aluminium",
      "quantity": 1,
      "length": 3,
      "width": 1.0625,
      "thickness": 0.125,
      "roughLength": 3,
      "roughWidth": 1.0625,
      "grainAxis": 2,
      "normalAxis": 1,
      "subsequentMachining": [],
      "method": "Own reference finished blank; dependent parts use actual measured stock/assembled opening and stated fitting equations."
    },
    {
      "id": "V-floor-under",
      "name": "Exterior veneer · floor-under",
      "material": "veneer",
      "quantity": 1,
      "length": 48.061,
      "width": 24.061,
      "thickness": 0.0305,
      "roughLength": 48.561,
      "roughWidth": 24.561,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-roof-top",
      "name": "Exterior veneer · roof-top",
      "material": "veneer",
      "quantity": 1,
      "length": 48.061,
      "width": 24.061,
      "thickness": 0.0305,
      "roughLength": 48.561,
      "roughWidth": 24.561,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-P01-front",
      "name": "Exterior veneer · P01-front",
      "material": "veneer",
      "quantity": 1,
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 48.561,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-P01-back",
      "name": "Exterior veneer · P01-back",
      "material": "veneer",
      "quantity": 1,
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 48.561,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-P01-left",
      "name": "Exterior veneer · P01-left",
      "material": "veneer",
      "quantity": 1,
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 24.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-P01-right",
      "name": "Exterior veneer · P01-right",
      "material": "veneer",
      "quantity": 1,
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 24.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-P02-front",
      "name": "Exterior veneer · P02-front",
      "material": "veneer",
      "quantity": 1,
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 48.561,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-P02-back",
      "name": "Exterior veneer · P02-back",
      "material": "veneer",
      "quantity": 1,
      "length": 48.061,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 48.561,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-P02-left",
      "name": "Exterior veneer · P02-left",
      "material": "veneer",
      "quantity": 1,
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 24.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-P02-right",
      "name": "Exterior veneer · P02-right",
      "material": "veneer",
      "quantity": 1,
      "length": 24.0,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 24.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-P03L-face",
      "name": "Exterior veneer · P03L-face",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 24.0,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 24.5,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-P03L-front",
      "name": "Exterior veneer · P03L-front",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 1.233625,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03L-back",
      "name": "Exterior veneer · P03L-back",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 1.233625,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03L-vent-near",
      "name": "Exterior veneer · P03L-vent-near",
      "material": "veneer",
      "quantity": 1,
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 2.439,
      "roughWidth": 1.203125,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03L-vent-far",
      "name": "Exterior veneer · P03L-vent-far",
      "material": "veneer",
      "quantity": 1,
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 2.439,
      "roughWidth": 1.203125,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03L-vent-bottom",
      "name": "Exterior veneer · P03L-vent-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 8.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 2
    },
    {
      "id": "V-P03L-vent-top",
      "name": "Exterior veneer · P03L-vent-top",
      "material": "veneer",
      "quantity": 1,
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 8.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 2
    },
    {
      "id": "V-P03R-face",
      "name": "Exterior veneer · P03R-face",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 24.0,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 24.5,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-P03R-front",
      "name": "Exterior veneer · P03R-front",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 1.233625,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03R-back",
      "name": "Exterior veneer · P03R-back",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 0.733625,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 1.233625,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03R-vent-near",
      "name": "Exterior veneer · P03R-vent-near",
      "material": "veneer",
      "quantity": 1,
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 2.439,
      "roughWidth": 1.203125,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03R-vent-far",
      "name": "Exterior veneer · P03R-vent-far",
      "material": "veneer",
      "quantity": 1,
      "length": 1.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 2.439,
      "roughWidth": 1.203125,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-P03R-vent-bottom",
      "name": "Exterior veneer · P03R-vent-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 8.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 2
    },
    {
      "id": "V-P03R-vent-top",
      "name": "Exterior veneer · P03R-vent-top",
      "material": "veneer",
      "quantity": 1,
      "length": 8,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 8.5,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 2
    },
    {
      "id": "V-back",
      "name": "Exterior veneer · back",
      "material": "veneer",
      "quantity": 1,
      "length": 46.59375,
      "width": 22.59375,
      "thickness": 0.0305,
      "roughLength": 47.09375,
      "roughWidth": 23.09375,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-roof-L-left",
      "name": "Exterior veneer · roof-L-left",
      "material": "veneer",
      "quantity": 1,
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 12.439,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-roof-L-right",
      "name": "Exterior veneer · roof-L-right",
      "material": "veneer",
      "quantity": 1,
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 12.439,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-roof-L-front",
      "name": "Exterior veneer · roof-L-front",
      "material": "veneer",
      "quantity": 1,
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 18.5,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-roof-L-back",
      "name": "Exterior veneer · roof-L-back",
      "material": "veneer",
      "quantity": 1,
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 18.5,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-roof-R-left",
      "name": "Exterior veneer · roof-R-left",
      "material": "veneer",
      "quantity": 1,
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 12.439,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-roof-R-right",
      "name": "Exterior veneer · roof-R-right",
      "material": "veneer",
      "quantity": 1,
      "length": 11.939,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 12.439,
      "roughWidth": 1.203125,
      "grainAxis": 1,
      "normalAxis": 0
    },
    {
      "id": "V-roof-R-front",
      "name": "Exterior veneer · roof-R-front",
      "material": "veneer",
      "quantity": 1,
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 18.5,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-roof-R-back",
      "name": "Exterior veneer · roof-R-back",
      "material": "veneer",
      "quantity": 1,
      "length": 18,
      "width": 0.703125,
      "thickness": 0.0305,
      "roughLength": 18.5,
      "roughWidth": 1.203125,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-F0L-face",
      "name": "Exterior veneer · F0L-face",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 3.0,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-F0R-face",
      "name": "Exterior veneer · F0R-face",
      "material": "veneer",
      "quantity": 1,
      "length": 22.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "roughLength": 23.09375,
      "roughWidth": 3.0,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-F0B-face",
      "name": "Exterior veneer · F0B-face",
      "material": "veneer",
      "quantity": 1,
      "length": 41.59375,
      "width": 3.5,
      "thickness": 0.0305,
      "roughLength": 42.09375,
      "roughWidth": 4.0,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-F0T-face",
      "name": "Exterior veneer · F0T-face",
      "material": "veneer",
      "quantity": 1,
      "length": 41.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "roughLength": 42.09375,
      "roughWidth": 3.0,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-F0C-face",
      "name": "Exterior veneer · F0C-face",
      "material": "veneer",
      "quantity": 1,
      "length": 16.59375,
      "width": 2.5,
      "thickness": 0.0305,
      "roughLength": 17.09375,
      "roughWidth": 3.0,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-L-jamb-left",
      "name": "Exterior veneer · L-jamb-left",
      "material": "veneer",
      "quantity": 1,
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 17.03275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-L-jamb-right",
      "name": "Exterior veneer · L-jamb-right",
      "material": "veneer",
      "quantity": 1,
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 17.03275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-L-jamb-bottom",
      "name": "Exterior veneer · L-jamb-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 20.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-L-jamb-top",
      "name": "Exterior veneer · L-jamb-top",
      "material": "veneer",
      "quantity": 1,
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 20.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-DL0H-face",
      "name": "Exterior veneer · DL0H-face",
      "material": "veneer",
      "quantity": 1,
      "length": 16.27975,
      "width": 1.718,
      "thickness": 0.0305,
      "roughLength": 16.77975,
      "roughWidth": 2.218,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-DL0J-face",
      "name": "Exterior veneer · DL0J-face",
      "material": "veneer",
      "quantity": 1,
      "length": 16.27975,
      "width": 1.99925,
      "thickness": 0.0305,
      "roughLength": 16.77975,
      "roughWidth": 2.49925,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-DL0B-face",
      "name": "Exterior veneer · DL0B-face",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.218,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-DL0T-face",
      "name": "Exterior veneer · DL0T-face",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.218,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-doorL-hinge",
      "name": "Exterior veneer · doorL-hinge",
      "material": "veneer",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.71875,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-doorL-latch",
      "name": "Exterior veneer · doorL-latch",
      "material": "veneer",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.71875,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-doorL-bottom",
      "name": "Exterior veneer · doorL-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-doorL-top",
      "name": "Exterior veneer · doorL-top",
      "material": "veneer",
      "quantity": 1,
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-windowL-left",
      "name": "Exterior veneer · windowL-left",
      "material": "veneer",
      "quantity": 1,
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 13.28275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-windowL-right",
      "name": "Exterior veneer · windowL-right",
      "material": "veneer",
      "quantity": 1,
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 13.28275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-windowL-bottom",
      "name": "Exterior veneer · windowL-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-windowL-top",
      "name": "Exterior veneer · windowL-top",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-R-jamb-left",
      "name": "Exterior veneer · R-jamb-left",
      "material": "veneer",
      "quantity": 1,
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 17.03275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-R-jamb-right",
      "name": "Exterior veneer · R-jamb-right",
      "material": "veneer",
      "quantity": 1,
      "length": 16.53275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 17.03275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-R-jamb-bottom",
      "name": "Exterior veneer · R-jamb-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 20.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-R-jamb-top",
      "name": "Exterior veneer · R-jamb-top",
      "material": "veneer",
      "quantity": 1,
      "length": 19.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 20.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-DR0H-face",
      "name": "Exterior veneer · DR0H-face",
      "material": "veneer",
      "quantity": 1,
      "length": 16.27975,
      "width": 1.99925,
      "thickness": 0.0305,
      "roughLength": 16.77975,
      "roughWidth": 2.49925,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-DR0J-face",
      "name": "Exterior veneer · DR0J-face",
      "material": "veneer",
      "quantity": 1,
      "length": 16.27975,
      "width": 1.718,
      "thickness": 0.0305,
      "roughLength": 16.77975,
      "roughWidth": 2.218,
      "grainAxis": 2,
      "normalAxis": 1
    },
    {
      "id": "V-DR0B-face",
      "name": "Exterior veneer · DR0B-face",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.218,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-DR0T-face",
      "name": "Exterior veneer · DR0T-face",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.718,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.218,
      "grainAxis": 0,
      "normalAxis": 1
    },
    {
      "id": "V-doorR-hinge",
      "name": "Exterior veneer · doorR-hinge",
      "material": "veneer",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.71875,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-doorR-latch",
      "name": "Exterior veneer · doorR-latch",
      "material": "veneer",
      "quantity": 1,
      "length": 16.21875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.71875,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-doorR-bottom",
      "name": "Exterior veneer · doorR-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-doorR-top",
      "name": "Exterior veneer · doorR-top",
      "material": "veneer",
      "quantity": 1,
      "length": 19.264125,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 19.764125,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-windowR-left",
      "name": "Exterior veneer · windowR-left",
      "material": "veneer",
      "quantity": 1,
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 13.28275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-windowR-right",
      "name": "Exterior veneer · windowR-right",
      "material": "veneer",
      "quantity": 1,
      "length": 12.78275,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 13.28275,
      "roughWidth": 2.0,
      "grainAxis": 2,
      "normalAxis": 0
    },
    {
      "id": "V-windowR-bottom",
      "name": "Exterior veneer · windowR-bottom",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    },
    {
      "id": "V-windowR-top",
      "name": "Exterior veneer · windowR-top",
      "material": "veneer",
      "quantity": 1,
      "length": 15.546875,
      "width": 1.5,
      "thickness": 0.0305,
      "roughLength": 16.046875,
      "roughWidth": 2.0,
      "grainAxis": 0,
      "normalAxis": 2
    }
  ],
  "screenAssemblies": [
    {
      "mesh": "ML",
      "normalAxis": 0,
      "wire": 0.041,
      "pitch": 0.541,
      "clearAperture": 0.5,
      "cellCenter": {
        "1": 6.5,
        "2": 4.203125
      },
      "captures": [
        "VLB",
        "VLT",
        "VLF",
        "VLA"
      ]
    },
    {
      "mesh": "MR",
      "normalAxis": 0,
      "wire": 0.041,
      "pitch": 0.541,
      "clearAperture": 0.5,
      "cellCenter": {
        "1": 6.5,
        "2": 4.203125
      },
      "captures": [
        "VRB",
        "VRT",
        "VRF",
        "VRA"
      ]
    },
    {
      "mesh": "MTL",
      "normalAxis": 2,
      "wire": 0.041,
      "pitch": 0.541,
      "clearAperture": 0.5,
      "cellCenter": {
        "0": 3.5,
        "1": 5.5
      },
      "captures": [
        "RTLF",
        "RTLA",
        "RTLL",
        "RTLR"
      ]
    },
    {
      "mesh": "MTR",
      "normalAxis": 2,
      "wire": 0.041,
      "pitch": 0.541,
      "clearAperture": 0.5,
      "cellCenter": {
        "0": 25.5,
        "1": 5.5
      },
      "captures": [
        "RTRF",
        "RTRA",
        "RTRL",
        "RTRR"
      ]
    }
  ],
  "hardwareSeats": [
    {
      "id": "HL0left",
      "lo": [
        2.015625,
        -0.1,
        5.328125
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "HL0right",
      "lo": [
        3.453125,
        -0.1,
        5.328125
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "HL1left",
      "lo": [
        2.015625,
        -0.1,
        16.671875
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "HL1right",
      "lo": [
        3.453125,
        -0.1,
        16.671875
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "HR0left",
      "lo": [
        43.484375,
        -0.1,
        5.328125
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "HR0right",
      "lo": [
        44.921875,
        -0.1,
        5.328125
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "HR1left",
      "lo": [
        43.484375,
        -0.1,
        16.671875
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "HR1right",
      "lo": [
        44.921875,
        -0.1,
        16.671875
      ],
      "size": [
        1.0625,
        0.2,
        3
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "L-HP-base",
      "lo": [
        22.78875,
        -0.1,
        10.25
      ],
      "size": [
        1.28,
        0.2,
        1.5
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "L-ST-base",
      "lo": [
        20.98375,
        -0.1,
        10.205
      ],
      "size": [
        1.59,
        0.2,
        1.59
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "R-HP-base",
      "lo": [
        23.931249999999995,
        -0.1,
        14.25
      ],
      "size": [
        1.28,
        0.2,
        1.5
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    },
    {
      "id": "R-ST-base",
      "lo": [
        25.426249999999996,
        -0.1,
        14.205
      ],
      "size": [
        1.59,
        0.2,
        1.59
      ],
      "purpose": "Actual metal bearing footprint; no veneer underneath"
    }
  ],
  "hingeAssemblies": [
    {
      "id": "HL0",
      "side": "L",
      "pivotX": 3.265625,
      "pivotY": -0.3125,
      "centerZ": 6.828125,
      "leafHeight": 3,
      "leafThickness": 0.08,
      "barrelDiameter": 0.375,
      "pinDiameter": 0.25,
      "pinHeadDiameter": 0.375,
      "totalPinLength": 3.13
    },
    {
      "id": "HL1",
      "side": "L",
      "pivotX": 3.265625,
      "pivotY": -0.3125,
      "centerZ": 18.171875,
      "leafHeight": 3,
      "leafThickness": 0.08,
      "barrelDiameter": 0.375,
      "pinDiameter": 0.25,
      "pinHeadDiameter": 0.375,
      "totalPinLength": 3.13
    },
    {
      "id": "HR0",
      "side": "R",
      "pivotX": 44.734375,
      "pivotY": -0.3125,
      "centerZ": 6.828125,
      "leafHeight": 3,
      "leafThickness": 0.08,
      "barrelDiameter": 0.375,
      "pinDiameter": 0.25,
      "pinHeadDiameter": 0.375,
      "totalPinLength": 3.13
    },
    {
      "id": "HR1",
      "side": "R",
      "pivotX": 44.734375,
      "pivotY": -0.3125,
      "centerZ": 18.171875,
      "leafHeight": 3,
      "leafThickness": 0.08,
      "barrelDiameter": 0.375,
      "pinDiameter": 0.25,
      "pinHeadDiameter": 0.375,
      "totalPinLength": 3.13
    }
  ],
  "machiningCuts": [
    {
      "id": "P02-cut-1",
      "part": "P02",
      "lo": [
        4,
        6,
        23.196875
      ],
      "size": [
        18,
        12,
        0.903125
      ]
    },
    {
      "id": "P02-cut-2",
      "part": "P02",
      "lo": [
        26,
        6,
        23.196875
      ],
      "size": [
        18,
        12,
        0.903125
      ]
    },
    {
      "id": "P03L-cut-1",
      "part": "P03L",
      "lo": [
        -0.1,
        7,
        4.703125
      ],
      "size": [
        0.903125,
        8,
        2
      ]
    },
    {
      "id": "P03R-cut-1",
      "part": "P03R",
      "lo": [
        47.196875,
        7,
        4.703125
      ],
      "size": [
        0.903125,
        8,
        2
      ]
    },
    {
      "id": "VLB-cut-1",
      "part": "VLB",
      "lo": [
        0.703125,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "VLT-cut-1",
      "part": "VLT",
      "lo": [
        0.703125,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "VLF-cut-1",
      "part": "VLF",
      "lo": [
        0.703125,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "VLA-cut-1",
      "part": "VLA",
      "lo": [
        0.703125,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "VRB-cut-1",
      "part": "VRB",
      "lo": [
        47.171875,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "VRT-cut-1",
      "part": "VRT",
      "lo": [
        47.171875,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "VRF-cut-1",
      "part": "VRF",
      "lo": [
        47.171875,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "VRA-cut-1",
      "part": "VRA",
      "lo": [
        47.171875,
        6.244,
        3.947125
      ],
      "size": [
        0.125,
        9.512,
        3.512
      ],
      "purpose": "Wire pocket, 1/8 deep, with 0.244-inch continuous perimeter bearing land"
    },
    {
      "id": "RTLF-cut-1",
      "part": "RTLF",
      "lo": [
        3.2439999999999998,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "RTLF-cut-2",
      "part": "RTLF",
      "lo": [
        10.574000000000002,
        4.999,
        23.083875
      ],
      "size": [
        1,
        1.002,
        0.22
      ],
      "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
    },
    {
      "id": "RTLF-cut-3",
      "part": "RTLF",
      "lo": [
        14.361,
        4.999,
        23.083875
      ],
      "size": [
        1,
        1.002,
        0.22
      ],
      "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
    },
    {
      "id": "RTLA-cut-1",
      "part": "RTLA",
      "lo": [
        3.2439999999999998,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "RTLA-cut-2",
      "part": "RTLA",
      "lo": [
        10.574000000000002,
        17.999,
        23.083875
      ],
      "size": [
        1,
        1.002,
        0.22
      ],
      "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
    },
    {
      "id": "RTLA-cut-3",
      "part": "RTLA",
      "lo": [
        14.361,
        17.999,
        23.083875
      ],
      "size": [
        1,
        1.002,
        0.22
      ],
      "purpose": "Steel end bearing pocket below screen; actual strip/cloth stack controls depth"
    },
    {
      "id": "RTLL-cut-1",
      "part": "RTLL",
      "lo": [
        3.2439999999999998,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "RTLR-cut-1",
      "part": "RTLR",
      "lo": [
        3.2439999999999998,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "RTRF-cut-1",
      "part": "RTRF",
      "lo": [
        25.244,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "RTRA-cut-1",
      "part": "RTRA",
      "lo": [
        25.244,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "RTRL-cut-1",
      "part": "RTRL",
      "lo": [
        25.244,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "RTRR-cut-1",
      "part": "RTRR",
      "lo": [
        25.244,
        5.244,
        23.171875
      ],
      "size": [
        19.512,
        13.512,
        0.13
      ],
      "purpose": "Wire pocket with 0.244-inch outer bearing land"
    },
    {
      "id": "CT-cut-1",
      "part": "CT",
      "lo": [
        23.25,
        21.786875,
        22.546875
      ],
      "size": [
        1.5,
        1.52,
        0.76
      ]
    },
    {
      "id": "CR-cut-1",
      "part": "CR",
      "lo": [
        23.24,
        21.796875,
        21.786875
      ],
      "size": [
        1.52,
        1.51,
        0.76
      ]
    }
  ],
  "inputs": {
    "buildId": "p03-02",
    "revision": "v5-candidate-01",
    "core": [
      48.0,
      24.0,
      24.0
    ],
    "plywood": 0.703125,
    "pine": 0.75,
    "veneer": {
      "referenceTotal": 0.0305,
      "maximumTotal": 0.046,
      "stock": [
        120,
        48
      ],
      "roughExtra": 0.5,
      "coverage": "All exterior faces, roof, underside, edges and opening reveals; separate pieces at service seams",
      "grain": "Physical length coordinates, no displacement",
      "balance": "Supplier approval required; added balancing layers invalidate dependent sizes"
    },
    "door": {
      "hingeTrim": 0.0625,
      "latchTrim": 0.03125,
      "topBottomTrim": 0.0625,
      "minimumFinishedGap": 0.0625,
      "rearLatchBevel": 5,
      "hingeStandOff": 0.125,
      "minimumStandOff": 0.109375,
      "maximumPinHead": 0.375
    },
    "screen": {
      "wire": 0.041,
      "pitch": 0.541,
      "clearAperture": 0.5,
      "crossing": 0.082,
      "maximumCrossing": 0.09375,
      "pocket": 0.125,
      "edgeRelief": 0.006
    },
    "finish": {
      "referenceFilm": 0.003,
      "scope": "Indoor moderate humidity, non-immersed, dry substrate; no water-holding claim"
    },
    "flushFasteners": {
      "count": 56,
      "diameter": 0.25,
      "pitch": 0.05,
      "purchasedLength": 2,
      "referenceLength": 2,
      "headDiameter": 0.477,
      "headAngle": 82,
      "headDepth": 0.13056681421958458,
      "maximumPublishedHeadHeight": 0.153,
      "drive": "Phillips #3",
      "clearanceDiameter": 0.28125,
      "washerDiameter": 0.625,
      "washerBore": 0.28125,
      "washerThickness": 0.0625,
      "washerThicknessRange": [
        0.051,
        0.08
      ],
      "nutHeight": 0.313,
      "nutHeightRange": [
        0.298,
        0.328
      ],
      "nutAcrossFlats": 0.4375,
      "capHeight": 0.46875,
      "capAcrossFlats": 0.4375,
      "capBlindDepth": 0.25,
      "minimumTail": 0.125,
      "maximumTail": 0.21875,
      "maximumChamfer": 0.015625,
      "veneerAccessDiameter": 0.5,
      "toolOutsideDiameterLimit": 0.75
    }
  },
  "baselineBindings": [
    {
      "path": "downloads/spec.json",
      "sha256": "064881bf52c366c296abf8d641885d6e8c65a5a2b8d3a752e4175d0accd74e06"
    },
    {
      "path": "model/p03-02.glb",
      "sha256": "cac24b98fb9a61506d8bb6c1aa785d73c8a081e69600d83ac89ad91ce0e78f43"
    }
  ],
  "statuses": {
    "research": "in progress",
    "dimensionalChecks": "in progress",
    "calculations": "in progress",
    "digitalValidation": "not completed",
    "prototype": "not built",
    "physicalTesting": "not performed",
    "qualifiedReview": "not obtained",
    "publication": "authorized; not published"
  },
  "flushFasteners": {
    "count": 56,
    "diameter": 0.25,
    "pitch": 0.05,
    "purchasedLength": 2,
    "referenceLength": 2,
    "headDiameter": 0.477,
    "headAngle": 82,
    "headDepth": 0.13056681421958458,
    "maximumPublishedHeadHeight": 0.153,
    "drive": "Phillips #3",
    "clearanceDiameter": 0.28125,
    "washerDiameter": 0.625,
    "washerBore": 0.28125,
    "washerThickness": 0.0625,
    "washerThicknessRange": [
      0.051,
      0.08
    ],
    "nutHeight": 0.313,
    "nutHeightRange": [
      0.298,
      0.328
    ],
    "nutAcrossFlats": 0.4375,
    "capHeight": 0.46875,
    "capAcrossFlats": 0.4375,
    "capBlindDepth": 0.25,
    "minimumTail": 0.125,
    "maximumTail": 0.21875,
    "maximumChamfer": 0.015625,
    "veneerAccessDiameter": 0.5,
    "toolOutsideDiameterLimit": 0.75
  },
  "fastenerCounts": {
    "W100": 76,
    "W125": 186,
    "W200": 5,
    "W150": 24,
    "HASP-SCREW": 14,
    "BOLT": 56
  },
  "coordinatedEnvelope": {
    "core": [
      48.0,
      24.0,
      24.0
    ],
    "referenceVeneeredWood": [
      48.061,
      24.061,
      24.061
    ],
    "maximumVeneeredWood": [
      48.092,
      24.092,
      24.092
    ],
    "hardwareProjectionExcluded": true
  },
  "serviceReference": {
    "frontClearance": 21,
    "abovePinClearance": 4,
    "doorOpeningDegrees": 100,
    "minimumFinishedGap": 0.0625,
    "roofRemoval": "Disconnect/cool/remove lamp, release 20 roof-to-ledger screws, lift entire roof with captures, screens and steel attached; no equipment hangs from it.",
    "paneRemoval": "Support/remove door, place front down on a padded bench; remove cap screws and four caps rearwards, then four rear pads, then the supported pane. Refit accepted pads/spacers and allow free expansion.",
    "pinOrder": "Upper pin first, lower second; support full door. Refit lower then upper.",
    "screenRemoval": "Roof removed to bench; side service through open supported doors. Hold exterior Phillips head, hold inside locknut with a thin 7/16-inch wrench and remove cover with another; support capture and wire before nut removal."
  },
  "scope": "P03-02 individual 48 × 24 × 24-inch indoor wooden enclosure; two independent doors, no liner or water-holding claim",
  "source_sha256": "5da1893a92b783dfedf9a02efbd3899b06284b51f3516d91b0d0eea940ac1dc4",
  "coatingArea": {
    "allWoodRectangleUpperFt2": 109.2564697265625,
    "veneerFaceUpperFt2": 42.09991027300347,
    "trialFt2": 2,
    "additionalReserve": 0.15,
    "withPresealAndReserveFt2": 176.35983699950086,
    "coverageFt2PerQuart": 50,
    "requiredQuarts": 4,
    "limit": "Conservative surface estimate; no immersion, animal-contact or abrasion approval implied"
  },
  "BOM": {
    "items": [
      {
        "id": "PLY",
        "name": "Birch plywood",
        "lowesItem": "786170",
        "model": "712849",
        "url": "https://www.lowes.com/pd/SoyStrong-NAF-3-4-in-HPVA-Birch-Plywood-Application-As-4-x-8/1000096524",
        "actualSpecification": "Published .703\" thickness; actual 4.039 × 8.039 feet; minimum 4 × 8 feet",
        "neededQuantity": 2,
        "packQuantity": 1,
        "buyPacks": 2,
        "partIds": [
          "P01",
          "P02",
          "P03L",
          "P03R",
          "P04"
        ],
        "notes": "Use the actual-stock story-stick and receiver-transfer instructions; retain two sheets for kerf.",
        "category": "material",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "Observed out of stock September 24, 2026; retained by owner instruction.",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 2,
        "unallocatedRemainder": 0,
        "researchFinding": "Current Lowe’s 712849 identity and .703-inch published gauge observed. Oversized panel listing, minimum 4×8 feet; no added-formaldehyde claim is made. Cabinet/bookcase use is listed; it is not structural rated. Local stock is unverified."
      },
      {
        "id": "PINE",
        "name": "RELIABILT clear eastern white pine",
        "lowesItem": "280485",
        "model": "PLSEL 1.000 6.000 8.000D4S",
        "url": "https://www.lowes.com/pd/Top-Choice-Common-1-in-x-6-in-x-8-ft-Actual-0-75-in-x-5-5-in-x-8-ft-Eastern-White-Pine-Board/1000672939",
        "actualSpecification": "3/4\" × 5 1/2\" × 96\", S4S",
        "neededQuantity": 8,
        "packQuantity": 1,
        "buyPacks": 8,
        "partIds": [
          "F0L",
          "F0R",
          "F0B",
          "F0T",
          "F0C",
          "F1L",
          "F1R",
          "F1B",
          "F1T",
          "F1C",
          "DL0H",
          "DL0J",
          "DL0B",
          "DL0T",
          "DL1H",
          "DL1J",
          "DL1B",
          "DL1T",
          "GLL",
          "GLR",
          "GLB",
          "GLT",
          "KLL",
          "KLR",
          "KLB",
          "KLT",
          "STLH",
          "STLJ",
          "STLB",
          "STLT",
          "DR0H",
          "DR0J",
          "DR0B",
          "DR0T",
          "DR1H",
          "DR1J",
          "DR1B",
          "DR1T",
          "GRL",
          "GRR",
          "GRB",
          "GRT",
          "KRL",
          "KRR",
          "KRB",
          "KRT",
          "STRH",
          "STRJ",
          "STRB",
          "STRT",
          "VLB",
          "VLT",
          "VLF",
          "VLA",
          "VRB",
          "VRT",
          "VRF",
          "VRA",
          "RTLF",
          "RTLA",
          "RTLL",
          "RTLR",
          "RTRF",
          "RTRA",
          "RTRL",
          "RTRR"
        ],
        "notes": "Wide-board layouts separated by final thickness; plane while safely wide and long before ripping caps/spacers/stops. Includes one dedicated trial board. Do not plane short loose strips.",
        "category": "material",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 8,
        "unallocatedRemainder": 0,
        "researchFinding": "Current RELIABILT 1×6×8 identity: actual .75×5.5×96 inches. Eight boards are this build’s own allocation."
      },
      {
        "id": "SOLID",
        "name": "RELIABILT clear S4S solid pine",
        "lowesItem": "810720",
        "model": "2X2 8 RPC",
        "url": "https://www.lowes.com/pd/Common-2-in-x-2-in-x-8-ft-Actual-1-5-in-x-1-5-in-x-8-ft-Pine-Board/1000110413",
        "actualSpecification": "1 1/2\" × 1 1/2\" × 96\", kiln-dried untreated solid stock",
        "neededQuantity": 3,
        "packQuantity": 1,
        "buyPacks": 3,
        "partIds": [
          "CLB",
          "CLU",
          "CLT",
          "CRB",
          "CRU",
          "CRT",
          "CB",
          "CT",
          "CC",
          "CR"
        ],
        "notes": "Three-board plan replaces all twenty support lamina with ten solid members. Measure actual stock; preserve full bearing section. No cleat lamination screws or glue-ups.",
        "category": "material",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 3,
        "unallocatedRemainder": 0,
        "researchFinding": "Current RELIABILT 2×2×8 identity: actual 1.5×1.5×96 inches. Three own-build lengths allocations."
      },
      {
        "id": "ACR",
        "name": "OPTIX clear acrylic",
        "lowesItem": "11288",
        "model": "1AG2196A",
        "url": "https://www.lowes.com/pd/OPTIX-0-22-in-x-24-in-x-48-in-Clear-Acrylic-Sheet/3502046",
        "actualSpecification": ".220\" × 24\" × 48\" sheet",
        "neededQuantity": 1,
        "packQuantity": 1,
        "buyPacks": 1,
        "partIds": [
          "AL",
          "AR"
        ],
        "notes": "Two panes fit along the 48\" direction. No screw holes through acrylic. Expansion pocket and cap must be checked after finishing.",
        "category": "material",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 1,
        "unallocatedRemainder": 0,
        "researchFinding": "Current OPTIX 1AG2196A identity: .22×24×48 inches. Exact pane fit, expansion and exposure remain H04."
      },
      {
        "id": "MESH",
        "name": "Acorn galvanized hardware cloth",
        "lowesItem": "2146697",
        "model": "HC24810",
        "url": "https://www.lowes.com/pd/Acorn-International-1-2-in-x-4-ft-x-10-ft-Hardware-Cloth/1001876728",
        "actualSpecification": "19 gauge; 1/2\" square opening; 48\" × 120\" roll",
        "neededQuantity": 1,
        "packQuantity": 1,
        "buyPacks": 1,
        "partIds": [
          "ML",
          "MR",
          "MTL",
          "MTR"
        ],
        "notes": "Two 19-1/2 by 13-1/2-inch roof blanks and two 9-1/2 by 3-1/2-inch inlet blanks; 3/4-inch overlap. Half-inch clear aperture is an unapproved reference for containment; review actual animal/feeders, wire material and temperature. Keep cut ends concealed. Listing bird statements conflict; no species approval is inferred.",
        "category": "material",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "listing verified; animal containment unresolved",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 1,
        "unallocatedRemainder": 0,
        "researchFinding": "Current HC24810 listing: 48×120 inches, 19 gauge, half-inch mesh. Listing contains inconsistent bird suitability statements; no bird or species containment approval is taken from it. Actual aperture, weld peaks and wire finish require H05/H07."
      },
      {
        "id": "HINGE",
        "name": "McMaster removable-pin surface hinges",
        "lowesItem": null,
        "model": "1798A21",
        "url": "https://www.mcmaster.com/products/1798A21/",
        "actualSpecification": "Black-painted steel; 3 × 2-1/2-inch open envelope; .080-inch leaf; pair",
        "neededQuantity": 4,
        "packQuantity": 2,
        "buyPacks": 2,
        "partIds": [
          "HL0left",
          "HL0right",
          "HL0K0",
          "HL0K1",
          "HL0K2",
          "HL0K3",
          "HL0K4",
          "HL0PIN",
          "HL1left",
          "HL1right",
          "HL1K0",
          "HL1K1",
          "HL1K2",
          "HL1K3",
          "HL1K4",
          "HL1PIN",
          "HR0left",
          "HR0right",
          "HR0K0",
          "HR0K1",
          "HR0K2",
          "HR0K3",
          "HR0K4",
          "HR0PIN",
          "HR1left",
          "HR1right",
          "HR1K0",
          "HR1K1",
          "HR1K2",
          "HR1K3",
          "HR1K4",
          "HR1PIN"
        ],
        "notes": "Four 1798A21 hinges in two pairs. Eight full-leaf 1/8-inch aluminium spacers move both leaves equally forward. Twenty-four dedicated W150 screws are bought separately. Bare hinge gap 3/16 inch; custom mounting, head fit, effective rear-layer bite and actual roof-on pin removal require acceptance.",
        "category": "material",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "McMaster-Carr",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "adopted r4; normal received-part fit required",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 4,
        "unallocatedRemainder": 0,
        "researchFinding": "Current manufacturer 1798A21 and saved maker drawing reviewed: black steel, 3×2.5-inch open envelope, .08-inch leaf, six holes, sold in pairs. Custom spacers and actual removable pin envelope/capacity remain H01."
      },
      {
        "id": "W125",
        "name": "Hillman wood screws",
        "lowesItem": "3373",
        "model": "35054",
        "url": "https://www.lowes.com/pd/Hillman-8-x-1-1-4-in-Silver-Zinc-Plated-Flat-Interior-Wood-Screws-100-Count/3032661",
        "actualSpecification": "#8 × 1 1/4\", Phillips flat, zinc-plated steel, 100 per box",
        "neededQuantity": 186,
        "packQuantity": 100,
        "buyPacks": 2,
        "partIds": [
          "S021",
          "S022",
          "S023",
          "S024",
          "S025",
          "S026",
          "S027",
          "S028",
          "S029",
          "S030",
          "S031",
          "S032",
          "S033",
          "S034",
          "S035",
          "S036",
          "S057",
          "S058",
          "S059",
          "S060",
          "S061",
          "S062",
          "S063",
          "S064",
          "S065",
          "S066",
          "S067",
          "S068",
          "S069",
          "S070",
          "S071",
          "S072",
          "S073",
          "S074",
          "S075",
          "S076",
          "S077",
          "S078",
          "S079",
          "S080",
          "S081",
          "S082",
          "S083",
          "S084",
          "S085",
          "S086",
          "S087",
          "S088",
          "S089",
          "S090",
          "S091",
          "S092",
          "S093",
          "S094",
          "S095",
          "S096",
          "S097",
          "S098",
          "S099",
          "S100",
          "S101",
          "S102",
          "S103",
          "S104",
          "S105",
          "S106",
          "S107",
          "S108",
          "S109",
          "S110",
          "S111",
          "S112",
          "S113",
          "S114",
          "S115",
          "S116",
          "S117",
          "S118",
          "S119",
          "S120",
          "S121",
          "S122",
          "S123",
          "S124",
          "S125",
          "S126",
          "S127",
          "S128",
          "S129",
          "S130",
          "S131",
          "S132",
          "S133",
          "S134",
          "S135",
          "S136",
          "S137",
          "S138",
          "S139",
          "S140",
          "S141",
          "S142",
          "S143",
          "S144",
          "S145",
          "S146",
          "S147",
          "S148",
          "S149",
          "S150",
          "S151",
          "S152",
          "S153",
          "S154",
          "S155",
          "S156",
          "S157",
          "S158",
          "S159",
          "S160",
          "S161",
          "S162",
          "S163",
          "S164",
          "S165",
          "S166",
          "S167",
          "S168",
          "S169",
          "S170",
          "S171",
          "S172",
          "S173",
          "S174",
          "S175",
          "S176",
          "S177",
          "S178",
          "S179",
          "S180",
          "S181",
          "S182",
          "S183",
          "S184",
          "S185",
          "S186",
          "S187",
          "S188",
          "S189",
          "S190",
          "S191",
          "S192",
          "S193",
          "S194",
          "S195",
          "S196",
          "S197",
          "S198",
          "S199",
          "S200",
          "S201",
          "S202",
          "S203",
          "S204",
          "S205",
          "S206",
          "S207",
          "S208",
          "S209",
          "S210",
          "S211",
          "S212",
          "S213",
          "S214",
          "S215",
          "S216",
          "S217",
          "S218",
          "S219",
          "S220",
          "S221",
          "S222",
          "S223",
          "S224",
          "S225",
          "S266",
          "S268",
          "S269",
          "S270",
          "S271",
          "S272",
          "S273",
          "S274",
          "S275",
          "S276",
          "S277",
          "S278",
          "S279",
          "S280",
          "S281",
          "S282",
          "S283",
          "S284",
          "S285",
          "S286",
          "S287",
          "S288",
          "S289",
          "S290",
          "S291"
        ],
        "notes": "186 case/frame/door/roof #8 by 1-1/4-inch screws. Dedicated hinge screws are W150. Trial actual roots, stopped pilots, flush heads and receiver paths.",
        "category": "fastener",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 200,
        "unallocatedRemainder": 14,
        "researchFinding": "Current Hillman 35054: #8×1-1/4-inch zinc flat wood screws, 100 per box."
      },
      {
        "id": "W100",
        "name": "Hillman cap and stop screws",
        "lowesItem": "68355",
        "model": "35048",
        "url": "https://www.lowes.com/pd/Hillman-6-x-1-in-Silver-Flat-Head-100-Count-Interior-Exterior-Wood-Screws/3037704",
        "actualSpecification": "#6 × 1\", Phillips flat, zinc-plated steel, 100 per box",
        "neededQuantity": 76,
        "packQuantity": 100,
        "buyPacks": 1,
        "partIds": [
          "S001",
          "S002",
          "S003",
          "S004",
          "S005",
          "S006",
          "S007",
          "S008",
          "S009",
          "S010",
          "S011",
          "S012",
          "S013",
          "S014",
          "S015",
          "S016",
          "S017",
          "S018",
          "S019",
          "S020",
          "S037",
          "S038",
          "S039",
          "S040",
          "S041",
          "S042",
          "S043",
          "S044",
          "S045",
          "S046",
          "S047",
          "S048",
          "S049",
          "S050",
          "S051",
          "S052",
          "S053",
          "S054",
          "S055",
          "S056",
          "S230",
          "S231",
          "S232",
          "S233",
          "S234",
          "S235",
          "S236",
          "S237",
          "S238",
          "S239",
          "S240",
          "S241",
          "S242",
          "S243",
          "S244",
          "S245",
          "S246",
          "S247",
          "S248",
          "S249",
          "S250",
          "S251",
          "S252",
          "S253",
          "S254",
          "S255",
          "S256",
          "S257",
          "S258",
          "S259",
          "S260",
          "S261",
          "S262",
          "S263",
          "S264",
          "S265"
        ],
        "notes": "Cap screw centres outside acrylic edge; stop before tip emerges.",
        "category": "fastener",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 100,
        "unallocatedRemainder": 24,
        "researchFinding": "Current Hillman 35048: #6×1-inch zinc flat wood screws, 100 per box."
      },
      {
        "id": "W200",
        "name": "Hillman centre-column screws",
        "lowesItem": "67589",
        "model": "35057",
        "url": "https://www.lowes.com/pd/Hillman-50-Count-8-x-2-in-Flat-Head-Zinc-Plated-Interior-Exterior-Wood-Screws/3037571",
        "actualSpecification": "#8 × 2\", Phillips flat, zinc-plated steel, 50 per box",
        "neededQuantity": 5,
        "packQuantity": 50,
        "buyPacks": 1,
        "partIds": [
          "S226",
          "S227",
          "S228",
          "S229",
          "S267"
        ],
        "notes": "",
        "category": "fastener",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 50,
        "unallocatedRemainder": 45,
        "researchFinding": "Current Hillman 35057: #8×2-inch zinc flat wood screws, 50 per box."
      },
      {
        "id": "BOLT",
        "name": "Bolt Depot 1/4-20 × 2-inch zinc-plated Phillips flat-head screws",
        "lowesItem": "338",
        "model": "1536",
        "url": "https://boltdepot.com/Product-Details?product=1536",
        "actualSpecification": "1/4\"–20 × 2\", zinc-plated, 25 per pack",
        "neededQuantity": 56,
        "packQuantity": 1,
        "buyPacks": 58,
        "partIds": [
          "B001",
          "B002",
          "B003",
          "B004",
          "B005",
          "B006",
          "B007",
          "B008",
          "B009",
          "B010",
          "B011",
          "B012",
          "B013",
          "B014",
          "B015",
          "B016",
          "B017",
          "B018",
          "B019",
          "B020",
          "B021",
          "B022",
          "B023",
          "B024",
          "B025",
          "B026",
          "B027",
          "B028",
          "B029",
          "B030",
          "B031",
          "B032",
          "B033",
          "B034",
          "B035",
          "B036",
          "B037",
          "B038",
          "B039",
          "B040",
          "B041",
          "B042",
          "B043",
          "B044",
          "B045",
          "B046",
          "B047",
          "B048",
          "B049",
          "B050",
          "B051",
          "B052",
          "B053",
          "B054",
          "B055",
          "B056"
        ],
        "notes": "56 installed plus trial allowance below. 82-degree head, Phillips #3; head diameter .442–.477 inch and published height .153 inch. Exterior head flush with bare wood; length includes head. Fit removed screws to actual grip, washer, locknut and 1/8–7/32-inch covered tail. Do not bury a proud head under veneer. Preserve two complete threads after ≤1/64-inch chamfer and ≥1/32-inch unused cap depth; accepted cut-end corrosion treatment required.",
        "category": "fastener",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Bolt Depot",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 2,
        "purchasedQuantity": 58,
        "unallocatedRemainder": 0,
        "researchFinding": "Current Bolt Depot 1536: 1/4-20×2-inch zinc Phillips flat machine screw, 82 degrees; .442–.477-inch head diameter, .153-inch published head-height envelope. Phillips #3. Actual thread extent and stack acceptance remain H05."
      },
      {
        "id": "WASH",
        "name": "Bolt Depot 1/4-inch zinc-plated SAE flat washers",
        "lowesItem": "67847",
        "model": "2976",
        "url": "https://boltdepot.com/Product-Details?product=2976",
        "actualSpecification": "1/4\" zinc-plated steel, 100 per pack",
        "neededQuantity": 56,
        "packQuantity": 1,
        "buyPacks": 58,
        "partIds": [
          "B001",
          "B002",
          "B003",
          "B004",
          "B005",
          "B006",
          "B007",
          "B008",
          "B009",
          "B010",
          "B011",
          "B012",
          "B013",
          "B014",
          "B015",
          "B016",
          "B017",
          "B018",
          "B019",
          "B020",
          "B021",
          "B022",
          "B023",
          "B024",
          "B025",
          "B026",
          "B027",
          "B028",
          "B029",
          "B030",
          "B031",
          "B032",
          "B033",
          "B034",
          "B035",
          "B036",
          "B037",
          "B038",
          "B039",
          "B040",
          "B041",
          "B042",
          "B043",
          "B044",
          "B045",
          "B046",
          "B047",
          "B048",
          "B049",
          "B050",
          "B051",
          "B052",
          "B053",
          "B054",
          "B055",
          "B056"
        ],
        "notes": "One interior washer per through screw. Published outside diameter .620–.640 inch, inside .276–.296 inch, thickness .051–.080 inch. Actual measurements control fitted length. No outside washer.",
        "category": "fastener",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Bolt Depot",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 2,
        "purchasedQuantity": 58,
        "unallocatedRemainder": 0,
        "researchFinding": "Current Bolt Depot 2976: 1/4 zinc SAE washer, OD .620–.640, ID .276–.296, thickness .051–.080 inch."
      },
      {
        "id": "CAP",
        "name": "McMaster 91875A130 zinc-plated closed-end tip covers",
        "lowesItem": null,
        "model": "91875A130",
        "url": "https://www.mcmaster.com/91875A130/",
        "actualSpecification": "1/4-20, 18-8 stainless; listed 1/2-inch thread depth, 21/32-inch height, 7/16-inch wrench, 1/2-inch outside diameter; 10 per box",
        "neededQuantity": 56,
        "packQuantity": 25,
        "buyPacks": 3,
        "partIds": [
          "B001",
          "B002",
          "B003",
          "B004",
          "B005",
          "B006",
          "B007",
          "B008",
          "B009",
          "B010",
          "B011",
          "B012",
          "B013",
          "B014",
          "B015",
          "B016",
          "B017",
          "B018",
          "B019",
          "B020",
          "B021",
          "B022",
          "B023",
          "B024",
          "B025",
          "B026",
          "B027",
          "B028",
          "B029",
          "B030",
          "B031",
          "B032",
          "B033",
          "B034",
          "B035",
          "B036",
          "B037",
          "B038",
          "B039",
          "B040",
          "B041",
          "B042",
          "B043",
          "B044",
          "B045",
          "B046",
          "B047",
          "B048",
          "B049",
          "B050",
          "B051",
          "B052",
          "B053",
          "B054",
          "B055",
          "B056"
        ],
        "notes": "56 installed; three packs of 25. 1/4-20, 1/4-inch blind depth, 7/16-inch flats, 15/32-inch height. Locknut is primary retention; cover conceals the tail. Hold locknut stationary with a thin wrench while tightening or removing cover. Reject bottoming or exposed sharp edges.",
        "category": "fastener",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "McMaster-Carr",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "adopted r4; ordinary finished-stack fitting required",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 75,
        "unallocatedRemainder": 19,
        "researchFinding": "Current McMaster cap-nut family table identifies 91875A130: zinc, 1/4-20, blind depth 1/4 inch, 7/16-inch flats, 15/32-inch height, 25 per pack. Bare direct SKU route was not readable in the web reader; primary family table supports identity. Actual fit remains H05."
      },
      {
        "id": "PAD",
        "name": "Rubber-Cal loose neoprene sheet",
        "lowesItem": "2837423",
        "model": "30-004-062-012-036",
        "url": "https://www.lowes.com/pd/Rubber-Cal-Rubber-Cal-Neoprene-Sheet-40A-Durometer-Smooth-Finish-Backing-0-062-in-Thick-x-12-in-Width-x-36-in-Length-Black/1003202434",
        "actualSpecification": "1/16\" × 12\" × 36\", 40A durometer; one sheet",
        "neededQuantity": 1,
        "packQuantity": 1,
        "buyPacks": 1,
        "partIds": [
          "AL",
          "AR"
        ],
        "notes": "Sixteen trapped 1/4-inch-wide strips: eight 16-19/64-inch and eight 13-3/32-inch. Cut nominal 1/16-inch stock; actual rear light-contact reference .06125 inch. Machine spacers to the actual cured pane/pad stack without bending the pane. Keep pads inaccessible and record material/exposure acceptance.",
        "category": "material",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "dimensions verified; animal-contact/temperature suitability unresolved",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 1,
        "unallocatedRemainder": 0,
        "researchFinding": "Current Rubber-Cal 30-004-062-012-036 identity: nominal 1/16×12×36 inches, 40A neoprene. Compound/exposure and light-contact fit remain H04."
      },
      {
        "id": "GLUE",
        "name": "Titebond III Ultimate",
        "lowesItem": "1444",
        "model": "1414",
        "url": "https://www.lowes.com/pd/Titebond-16-Oz-III-Ultimate-Wood-Glue/1017425",
        "actualSpecification": "16 fluid ounce bottle",
        "neededQuantity": 1,
        "packQuantity": 1,
        "buyPacks": 1,
        "partIds": [
          "pine laminations"
        ],
        "notes": "Titebond III 16 fl oz. Apply above 47°F (8.3°C), open time 8–10 min and total assembly 20–25 min at 70°F (21°C)/50% RH; wait at least 24 hours before stressing/machining per received label. Excludes continuous immersion and structural/load-bearing use.",
        "category": "consumable",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [
          "https://www.titebond.com/product/wood-glues/e8d40b45-0ab3-49f7-8a9c-b53970f736af",
          "https://www.titebond.com/resources/use/all"
        ],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "verified listing; fit subject to receipt",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 1,
        "unallocatedRemainder": 0,
        "researchFinding": "Current Titebond III 1414 16-fl-oz identity; manufacturer application/use guidance observed. Separate clamp time from the minimum 24-hour no-stress period. No continuous immersion or structural capacity claim."
      },
      {
        "id": "FINISH",
        "name": "Varathane Triple Thick clear satin water-based polyurethane",
        "lowesItem": "9181732",
        "model": "284473-7482",
        "url": "https://www.lowes.com/pd/Varathane-Triple-Thick-Polyurethane-Clear-Wood-Finish-Self-Leveling-Formula-Scratch-And-Stain-Resistance-Durability-In-One-Coat-Satin-Quart/9181732",
        "actualSpecification": "Two 1-quart cans per pack; manufacturer 284473; UPC 020066273699; transparent satin with slight amber tone",
        "neededQuantity": 4,
        "packQuantity": 2,
        "buyPacks": 2,
        "partIds": [
          "all specified wood faces and cut edges"
        ],
        "notes": "Calculated full wood upper bound, veneer topcoat, sample and extra 15% reserve; two quart cans per pack. Supplier must accept floor/cleaning exposure and veneer system. One specified coat, full cure before assembly/occupancy; no immersion claim.",
        "category": "consumable",
        "required": true,
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "manufacturerEvidence": [
          "https://www.rustoleum.com/product-catalog/consumer-brands/varathane/varathane-triple-thick-polyurethane",
          "https://rustoleumsupport.zendesk.com/hc/en-us/articles/4422342995853-Varathane-Triple-Thick-Polyurethane",
          "https://www.rustoleum.com/~/media/DigitalEncyclopedia/Documents/RustoleumUSA/TDS/English/CBG/Varathane/VAR-35_Varathane_Triple_Thick_Polyurethane_TDS.ashx",
          "https://rustoleumsupport.zendesk.com/hc/en-us/article_attachments/43083323597709"
        ],
        "store": "Lowes",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "baselineStatus": "selected for owner-scoped drafting; application/cure and fit must be recorded",
        "baselineCheckedDate": "2026-09-24",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "trialAllowance": 0,
        "purchasedQuantity": 4,
        "unallocatedRemainder": 0,
        "researchFinding": "Current Varathane 284473 satin listing: two one-quart cans per pack. This build allocates two packs. Manufacturer full-cure and floor-use limitations remain relevant to H06; no animal/cleaner/abrasion acceptance inferred."
      },
      {
        "id": "HASP",
        "title": "National Hardware black swivel-staple safety hasp, 3-1/4 inch",
        "model": "N305-979",
        "retailer": "Lowe’s",
        "itemNumber": "9180731",
        "listingModel": "N305-979-3026",
        "url": "https://www.lowes.com/pd/National-Hardware-Black-Steel-3-1-4-in-L-Swivel-Staple-Safety-Hasp-1-pk/9180731",
        "neededQuantity": 2,
        "packageQuantity": 1,
        "required": true,
        "verifiedDate": "2026-09-25",
        "manufacturerEvidence": [
          "https://nationalhardwarestorage.blob.core.windows.net/documents/nh_td_v32_n305-979.pdf",
          "https://www.national-hardware.com/p/32-swivel-staple-safety-hasps?model=N305-979"
        ],
        "partIds": [
          "L-HP-base",
          "L-HP-pin",
          "L-HP-flap",
          "L-ST-base",
          "L-ST-washer",
          "L-ST-tab",
          "R-HP-base",
          "R-HP-pin",
          "R-HP-flap",
          "R-ST-base",
          "R-ST-washer",
          "R-ST-tab"
        ],
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "installation": "Use seven HASP-SCREW screws per hasp after the offcut trial. Padlocks optional, not required or included.",
        "name": "National Hardware black swivel-staple safety hasp, 3-1/4 inch",
        "store": "Lowe’s",
        "packQuantity": 1,
        "buyPacks": 2,
        "baselineStatus": null,
        "baselineCheckedDate": null,
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "notes": "",
        "trialAllowance": 0,
        "purchasedQuantity": 2,
        "unallocatedRemainder": 0,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "researchFinding": "Current National N305-979 identity and saved maker drawing. Nominal plate/slot dimensions support the reference envelope; actual forming, full plate bearing and independent operation remain H02."
      },
      {
        "id": "HASP-SCREW",
        "title": "Everbilt #10 × 5/8-inch zinc-plated Phillips flat-head wood screws, 12-pack",
        "model": "825391",
        "retailer": "Home Depot",
        "itemNumber": "317479421",
        "storeSKU": "1006524871",
        "url": "https://www.homedepot.com/p/Everbilt-10-x-5-8-in-Zinc-Plated-Phillips-Flat-Head-Wood-Screw-12-Pack-825391/317479421",
        "neededQuantity": 14,
        "packageQuantity": 12,
        "required": true,
        "verifiedDate": "2026-09-25",
        "partIds": [
          "S292",
          "S293",
          "S294",
          "S295",
          "S296",
          "S297",
          "S298",
          "S299",
          "S300",
          "S301",
          "S302",
          "S303",
          "S304",
          "S305"
        ],
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "installation": "Trial actual flat heads in the hardware countersinks; use a stopped pilot and hand-tighten. Minimum 1/16-inch rear wood cover.",
        "name": "Everbilt #10 × 5/8-inch zinc-plated Phillips flat-head wood screws, 12-pack",
        "store": "Home Depot",
        "packQuantity": 12,
        "buyPacks": 2,
        "baselineStatus": null,
        "baselineCheckedDate": null,
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "notes": "",
        "trialAllowance": 0,
        "purchasedQuantity": 24,
        "unallocatedRemainder": 10,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "researchFinding": "Current Home Depot Everbilt 825391: #10×5/8-inch zinc Phillips flat wood screws, 12 per pack."
      },
      {
        "id": "LAMP-STEEL",
        "title": "Hillman steel flat, 1 × 1/8 × 36 inches",
        "model": "11653",
        "itemNumber": "44119",
        "retailer": "Lowe’s",
        "url": "https://www.lowes.com/pd/Hillman-3-ft-x-1-in-Hot-Rolled-Weldable-Steel-Slotted-Metal-Flat-Bar/3057587",
        "neededQuantity": 1,
        "packageQuantity": 1,
        "partIds": [
          "LB1",
          "LB2"
        ],
        "required": true,
        "category": "construction material",
        "verifiedDate": "2026-09-24",
        "availabilityScope": "US product identities only; no address-specific stock or price promise",
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "affiliateUrl": null,
        "name": "Hillman steel flat, 1 × 1/8 × 36 inches",
        "store": "Lowe’s",
        "packQuantity": 1,
        "buyPacks": 1,
        "baselineStatus": null,
        "baselineCheckedDate": null,
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "notes": "One 36-inch bar yields two own 14-inch strips. End bearing pockets are now inside roof capture battens. Drill four transferred 9/32-inch holes, retain continuous bearing and inspect the actual fixture footprint/weight. No roof load rating.",
        "trialAllowance": 0,
        "purchasedQuantity": 1,
        "unallocatedRemainder": 0,
        "researchFinding": "Current Hillman 11653 is solid plain steel 1×36×1/8 inch; legacy URL says slotted but current product identity is solid. Changed lowered seats need actual fixture/load/thermal acceptance."
      },
      {
        "id": "W150",
        "name": "Hillman dedicated hinge wood screws",
        "model": "35055",
        "store": "Lowes",
        "url": "https://www.lowes.com/pd/Hillman-8-x-1-1-2-in-Zinc-Plated-Interior-Wood-Screws-75-Per-Box/3037569",
        "neededQuantity": 24,
        "packQuantity": 75,
        "buyPacks": 1,
        "required": true,
        "notes": "Dedicated 24 hinge screws, #8 by 1-1/2-inch Phillips flat zinc. Reference tip depth 1.295 inch after .08-inch leaf and .125-inch spacer; effective rear-layer bite .545 inch after front-layer clearance; rear cover .205 inch. Trial actual head/root/thread extent; custom mounting still requires H01 acceptance.",
        "trialAllowance": 0,
        "purchasedQuantity": 75,
        "unallocatedRemainder": 51,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "checkedDate": "2026-10-10",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "researchFinding": "Current Hillman 35055 listing: #8×1-1/2-inch Phillips flat zinc wood screws, 75 per box. Current source view is cached; no local inventory/date or price claim. Dedicated to 24 hinge positions, with received thread/head/mounting acceptance retained."
      },
      {
        "id": "LOCK",
        "name": "Bolt Depot 2624 zinc-plated 1/4-20 nylon-insert locknuts",
        "model": "2624",
        "store": "Bolt Depot",
        "url": "https://boltdepot.com/Product-Details?product=2624",
        "neededQuantity": 56,
        "packQuantity": 1,
        "buyPacks": 58,
        "required": true,
        "checkedDate": "2026-10-10",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "notes": "56 installed, one inside each capture. Height .298–.328 inch, 7/16-inch flats, minimum hex height .225 inch. Confirm actual thin-wrench access, full insert engagement and compatible fixture temperature. No impact driver; no torque/load rating assigned.",
        "trialAllowance": 2,
        "purchasedQuantity": 58,
        "unallocatedRemainder": 0,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "researchFinding": "Current Bolt Depot 2624: 1/4-20 zinc nylon locknut, height .298–.328, 7/16-inch flats, minimum .225-inch hex. Actual tool/temperature/retention fit remains H05."
      },
      {
        "id": "HSP",
        "name": "Everbilt solid aluminium flat bar, 1-1/2 × 36 × 1/8 inch",
        "model": "6215",
        "store": "Home Depot",
        "url": "https://www.homedepot.com/p/332735519",
        "neededQuantity": 1,
        "packQuantity": 1,
        "buyPacks": 1,
        "required": true,
        "checkedDate": "2026-10-10",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "notes": "Eight full-leaf 3 × 1-1/16-inch spacers. Match paired thickness; reference 1/8 inch, minimum 7/64. Transfer actual leaf holes and obtain supplier/qualified acceptance.",
        "trialAllowance": 0,
        "purchasedQuantity": 1,
        "unallocatedRemainder": 0,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "researchFinding": "Current Home Depot 332735519 redirects to Everbilt 6215, solid aluminium 1-1/2×36×1/8 inch. This is stock identity, not approval of custom hinge mounting."
      },
      {
        "id": "VENEER-maple",
        "name": "Maple exterior veneer",
        "model": "4 × 10 ft, selected species, 3M PSA; confirm exact configuration",
        "url": "https://oakwoodveneer.com/maple-veneer-flat-cut.html",
        "actualSpecification": "120 × 48-inch stock; grain along 120-inch length; reference complete stack 0.0305 inch, maximum 0.046 inch",
        "neededQuantity": 2,
        "packQuantity": 1,
        "buyPacks": 2,
        "category": "optional finish choice",
        "required": false,
        "exclusiveGroup": "Choose one species only",
        "notes": "Choose ONE species. Full exterior, edges, reveals and trial allocation; supplier bond, panel-balance and cured-stack approval required.",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "store": "Oakwood Veneer",
        "baselineStatus": "Manufacturer species/size/backer evidence; order configuration to confirm",
        "trialAllowance": 0,
        "purchasedQuantity": 2,
        "unallocatedRemainder": 0,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "researchFinding": "Current Oakwood species listing and PSA/backing options observed. Confirm selected 48×120-inch 3M PSA configuration, complete cured stack, pressure, dwell, balance and substrate approval. Two sheets of ONE species; scan appearance does not guarantee delivered grain/color."
      },
      {
        "id": "VENEER-oak",
        "name": "White oak exterior veneer",
        "model": "4 × 10 ft, selected species, 3M PSA; confirm exact configuration",
        "url": "https://oakwoodveneer.com/oak-veneer-white-flat-cut.html",
        "actualSpecification": "120 × 48-inch stock; grain along 120-inch length; reference complete stack 0.0305 inch, maximum 0.046 inch",
        "neededQuantity": 2,
        "packQuantity": 1,
        "buyPacks": 2,
        "category": "optional finish choice",
        "required": false,
        "exclusiveGroup": "Choose one species only",
        "notes": "Choose ONE species. Full exterior, edges, reveals and trial allocation; supplier bond, panel-balance and cured-stack approval required.",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "store": "Oakwood Veneer",
        "baselineStatus": "Manufacturer species/size/backer evidence; order configuration to confirm",
        "trialAllowance": 0,
        "purchasedQuantity": 2,
        "unallocatedRemainder": 0,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "researchFinding": "Current Oakwood species listing and PSA/backing options observed. Confirm selected 48×120-inch 3M PSA configuration, complete cured stack, pressure, dwell, balance and substrate approval. Two sheets of ONE species; scan appearance does not guarantee delivered grain/color."
      },
      {
        "id": "VENEER-walnut",
        "name": "Walnut exterior veneer",
        "model": "4 × 10 ft, selected species, 3M PSA; confirm exact configuration",
        "url": "https://oakwoodveneer.com/walnut-veneer-flat-cut.html",
        "actualSpecification": "120 × 48-inch stock; grain along 120-inch length; reference complete stack 0.0305 inch, maximum 0.046 inch",
        "neededQuantity": 2,
        "packQuantity": 1,
        "buyPacks": 2,
        "category": "optional finish choice",
        "required": false,
        "exclusiveGroup": "Choose one species only",
        "notes": "Choose ONE species. Full exterior, edges, reveals and trial allocation; supplier bond, panel-balance and cured-stack approval required.",
        "status": "Current primary identity reviewed; actual received fit and listed supplier/physical holds remain",
        "checkedDate": "2026-10-10",
        "store": "Oakwood Veneer",
        "baselineStatus": "Manufacturer species/size/backer evidence; order configuration to confirm",
        "trialAllowance": 0,
        "purchasedQuantity": 2,
        "unallocatedRemainder": 0,
        "affiliateStatus": "Ordinary direct link; approved affiliate mapping unavailable",
        "researchFinding": "Current Oakwood species listing and PSA/backing options observed. Confirm selected 48×120-inch 3M PSA configuration, complete cured stack, pressure, dwell, balance and substrate approval. Two sheets of ONE species; scan appearance does not guarantee delivered grain/color."
      }
    ],
    "purchasesMade": false,
    "availabilityScope": "No address-specific stock, price or delivery promise",
    "specificationPath": "specification.json"
  },
  "receivingHolds": [
    {
      "id": "H01",
      "title": "Hinges, stand-off and service",
      "status": "open",
      "required": "Accept custom equal full-leaf aluminium spacers with hinge supplier/qualified reviewer. Receive exact 1798A21 and prove full support, actual hole template, 1.295-inch reference tip depth and .545-inch effective rear-layer thread bite after first-layer clearance, finished 100-degree swing and roof-on pin withdrawal. Pin/head geometry and capacity are not certified by the model."
    },
    {
      "id": "H02",
      "title": "Two independent hasps",
      "status": "open",
      "required": "Receive N305-979 and trial each complete assembly on matching finished offcuts. All three fixed-base and four swivel-plate holes supported, ≥1/4-inch hole-centre edge distance, ≥1/16-inch buried tip. Small moving-plate margin requires actual trace; reject overhang. Metal forming and pivot positions remain approximate."
    },
    {
      "id": "H03",
      "title": "Veneer and actual stock",
      "status": "open",
      "required": "Approve species, exact backing/3M PSA, sealer, balancing, pressure, acclimation and dwell with supplier. Complete cured stack ≤.046 inch per face; final gaps ≥1/16 inch. Additional balancing layers or changed stock require coordinated revision. Record plywood gauge, grain, flatness, defects and pine thickness before dependent cuts."
    },
    {
      "id": "H04",
      "title": "Floating acrylic and neoprene",
      "status": "open",
      "required": "Receive actual OPTIX .220-inch sheet and plain neoprene compound. Supplier confirms thermal/moisture expansion, capture and exposure; reference 1/8-inch pane edge space and 1/4-inch cap overlap. Plane spacers to actual cured pane/pad stack for light contact, no bow or rattle; pads remain trapped and inaccessible."
    },
    {
      "id": "H05",
      "title": "Screens and flush connections",
      "status": "open",
      "required": "Measure actual .041-inch reference wire and crossings, max 3/32 inch in 1/8-inch pockets; continuous outer lands remain. Transfer bores through open cells, preserving wire ends. Trial 82-degree countersinks, intact plywood bearing, actual washer/nut stack, two-wrench access, 1/8–7/32-inch tail, two complete threads and ≥1/32-inch blind cover clearance. Do not crush wood/wire. Actual clamp/load/corrosion acceptance is required."
    },
    {
      "id": "H06",
      "title": "Coating, adhesive and cleaning",
      "status": "open",
      "required": "Approve actual veneer/sealer/topcoat and contact/cleaner exposure. Titebond waits and Varathane seven-day full cure at reference conditions are separate; adverse conditions need longer. Manufacturer floor exclusion and abrasion/animal contact require acceptance before this use. No water-holding or chemical compatibility claim."
    },
    {
      "id": "H07",
      "title": "Support, equipment and containment",
      "status": "open",
      "required": "Continuous level support under entire finished base; weigh actual complete shell/contents and verify supporting furniture/floor and stability. Lowered steel support geometry needs qualified load/thermal review and actual fixture/roof trial. Screen aperture and all operating gaps need species-specific containment review. Prototype, physical testing and qualified approval not performed."
    }
  ],
  "cuttingLayouts": [
    {
      "id": "PLY-1",
      "width": 96,
      "height": 48,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PLY",
      "pieces": [
        {
          "id": "P01",
          "w": 48.125,
          "h": 24.0,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "P04",
          "w": 46.71875,
          "h": 22.59375,
          "x": 48.375,
          "y": 0.125
        },
        {
          "id": "P03L",
          "w": 24.125,
          "h": 22.59375,
          "x": 0.125,
          "y": 24.25
        },
        {
          "id": "P03R",
          "w": 24.125,
          "h": 22.59375,
          "x": 48.375,
          "y": 22.84375
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 95.21875,
          "y": 0.125,
          "w": 0.65625,
          "h": 47.75
        },
        {
          "x": 24.375,
          "y": 24.25,
          "w": 23.875,
          "h": 23.625
        },
        {
          "x": 0.125,
          "y": 46.96875,
          "w": 24.125,
          "h": 0.90625
        },
        {
          "x": 72.625,
          "y": 22.84375,
          "w": 22.46875,
          "h": 25.03125
        },
        {
          "x": 48.375,
          "y": 45.5625,
          "w": 24.125,
          "h": 2.3125
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "PLY-2",
      "width": 96,
      "height": 48,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PLY",
      "pieces": [
        {
          "id": "P02",
          "w": 48.125,
          "h": 24.0,
          "x": 0.125,
          "y": 0.125
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 48.375,
          "y": 0.125,
          "w": 47.5,
          "h": 47.75
        },
        {
          "x": 0.125,
          "y": 24.25,
          "w": 48.125,
          "h": 23.625
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "PINE-0.25-1",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "KLB",
          "w": 15.921875,
          "h": 0.875,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "KLT",
          "w": 15.921875,
          "h": 0.875,
          "x": 0.125,
          "y": 1.125
        },
        {
          "id": "KRB",
          "w": 15.921875,
          "h": 0.875,
          "x": 0.125,
          "y": 2.125
        },
        {
          "id": "KRT",
          "w": 15.921875,
          "h": 0.875,
          "x": 0.125,
          "y": 3.125
        },
        {
          "id": "KLL",
          "w": 14.96875,
          "h": 0.875,
          "x": 0.125,
          "y": 4.125
        },
        {
          "id": "KLR",
          "w": 14.96875,
          "h": 0.875,
          "x": 16.171875,
          "y": 0.125
        },
        {
          "id": "KRL",
          "w": 14.96875,
          "h": 0.875,
          "x": 16.171875,
          "y": 1.125
        },
        {
          "id": "KRR",
          "w": 14.96875,
          "h": 0.875,
          "x": 16.171875,
          "y": 2.125
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 15.21875,
          "y": 4.125,
          "w": 0.828125,
          "h": 1.25
        },
        {
          "x": 0.125,
          "y": 5.125,
          "w": 14.96875,
          "h": 0.25
        },
        {
          "x": 31.265625,
          "y": 0.125,
          "w": 64.609375,
          "h": 5.25
        },
        {
          "x": 16.171875,
          "y": 3.125,
          "w": 14.96875,
          "h": 2.25
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required Plane the entire supported board to 0.25 inch first; use tool minimum feeding lengths and a milling service where required.",
      "planeTo": 0.25
    },
    {
      "id": "PINE-0.34375-1",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "GLB",
          "w": 16.671875,
          "h": 0.5,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "GLT",
          "w": 16.671875,
          "h": 0.5,
          "x": 0.125,
          "y": 0.75
        },
        {
          "id": "GRB",
          "w": 16.671875,
          "h": 0.5,
          "x": 0.125,
          "y": 1.375
        },
        {
          "id": "GRT",
          "w": 16.671875,
          "h": 0.5,
          "x": 0.125,
          "y": 2.0
        },
        {
          "id": "GLL",
          "w": 14.96875,
          "h": 0.5,
          "x": 0.125,
          "y": 2.625
        },
        {
          "id": "GLR",
          "w": 14.96875,
          "h": 0.5,
          "x": 0.125,
          "y": 3.25
        },
        {
          "id": "GRL",
          "w": 14.96875,
          "h": 0.5,
          "x": 0.125,
          "y": 3.875
        },
        {
          "id": "GRR",
          "w": 14.96875,
          "h": 0.5,
          "x": 0.125,
          "y": 4.5
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 16.921875,
          "y": 0.125,
          "w": 78.953125,
          "h": 5.25
        },
        {
          "x": 15.21875,
          "y": 2.625,
          "w": 1.578125,
          "h": 2.75
        },
        {
          "x": 0.125,
          "y": 5.125,
          "w": 14.96875,
          "h": 0.25
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required Plane the entire supported board to 0.34375 inch first; use tool minimum feeding lengths and a milling service where required.",
      "planeTo": 0.34375
    },
    {
      "id": "PINE-0.375-1",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "STLB",
          "w": 17.921875,
          "h": 0.6875,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "STLT",
          "w": 17.921875,
          "h": 0.6875,
          "x": 0.125,
          "y": 0.9375
        },
        {
          "id": "STRB",
          "w": 17.921875,
          "h": 0.6875,
          "x": 0.125,
          "y": 1.75
        },
        {
          "id": "STRT",
          "w": 17.921875,
          "h": 0.6875,
          "x": 0.125,
          "y": 2.5625
        },
        {
          "id": "STLH",
          "w": 16.46875,
          "h": 0.6875,
          "x": 0.125,
          "y": 3.375
        },
        {
          "id": "STLJ",
          "w": 16.46875,
          "h": 0.6875,
          "x": 0.125,
          "y": 4.1875
        },
        {
          "id": "STRH",
          "w": 16.46875,
          "h": 0.6875,
          "x": 18.171875,
          "y": 0.125
        },
        {
          "id": "STRJ",
          "w": 16.46875,
          "h": 0.6875,
          "x": 18.171875,
          "y": 0.9375
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 16.71875,
          "y": 3.375,
          "w": 1.328125,
          "h": 2.0
        },
        {
          "x": 0.125,
          "y": 5.0,
          "w": 16.46875,
          "h": 0.375
        },
        {
          "x": 34.765625,
          "y": 0.125,
          "w": 61.109375,
          "h": 5.25
        },
        {
          "x": 18.171875,
          "y": 1.75,
          "w": 16.46875,
          "h": 3.625
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required Plane the entire supported board to 0.375 inch first; use tool minimum feeding lengths and a milling service where required.",
      "planeTo": 0.375
    },
    {
      "id": "PINE-0.75-1",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "F1B",
          "w": 46.71875,
          "h": 3.5,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "F0B",
          "w": 41.71875,
          "h": 3.5,
          "x": 46.96875,
          "y": 0.125
        },
        {
          "id": "RTLF",
          "w": 20.125,
          "h": 1,
          "x": 0.125,
          "y": 3.75
        },
        {
          "id": "RTLA",
          "w": 20.125,
          "h": 1,
          "x": 20.375,
          "y": 3.75
        },
        {
          "id": "RTRF",
          "w": 20.125,
          "h": 1,
          "x": 40.625,
          "y": 3.75
        },
        {
          "id": "RTRA",
          "w": 20.125,
          "h": 1,
          "x": 60.875,
          "y": 3.75
        },
        {
          "id": "RTLL",
          "w": 12.125,
          "h": 1,
          "x": 81.125,
          "y": 3.75
        },
        {
          "id": "VLF",
          "w": 2.125,
          "h": 1,
          "x": 93.375,
          "y": 3.75
        },
        {
          "id": "VLA",
          "w": 2.125,
          "h": 1,
          "x": 88.8125,
          "y": 0.125
        },
        {
          "id": "VRF",
          "w": 2.125,
          "h": 1,
          "x": 91.0625,
          "y": 0.125
        },
        {
          "id": "VRA",
          "w": 2.125,
          "h": 1,
          "x": 93.3125,
          "y": 0.125
        }
      ],
      "cutOrder": "horizontal",
      "offcuts": [
        {
          "x": 0.125,
          "y": 4.875,
          "w": 95.75,
          "h": 0.5
        },
        {
          "x": 95.625,
          "y": 3.75,
          "w": 0.25,
          "h": 1
        },
        {
          "x": 88.8125,
          "y": 1.25,
          "w": 7.0625,
          "h": 2.375
        },
        {
          "x": 95.5625,
          "y": 0.125,
          "w": 0.3125,
          "h": 1
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required Plane the entire supported board to 0.75 inch first; use tool minimum feeding lengths and a milling service where required.",
      "planeTo": 0.75
    },
    {
      "id": "PINE-0.75-2",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "F1T",
          "w": 46.71875,
          "h": 2.5,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "F0T",
          "w": 41.71875,
          "h": 2.5,
          "x": 46.96875,
          "y": 0.125
        },
        {
          "id": "F0L",
          "w": 22.71875,
          "h": 2.5,
          "x": 0.125,
          "y": 2.75
        },
        {
          "id": "F0R",
          "w": 22.71875,
          "h": 2.5,
          "x": 22.96875,
          "y": 2.75
        },
        {
          "id": "F0C",
          "w": 16.71875,
          "h": 2.5,
          "x": 45.8125,
          "y": 2.75
        },
        {
          "id": "F1L",
          "w": 16.71875,
          "h": 2.5,
          "x": 62.65625,
          "y": 2.75
        },
        {
          "id": "DL0J",
          "w": 16.34375,
          "h": 1.96875,
          "x": 79.5,
          "y": 2.75
        }
      ],
      "cutOrder": "horizontal",
      "offcuts": [
        {
          "x": 88.8125,
          "y": 0.125,
          "w": 7.0625,
          "h": 2.5
        },
        {
          "x": 79.5,
          "y": 4.84375,
          "w": 16.375,
          "h": 0.40625
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required Plane the entire supported board to 0.75 inch first; use tool minimum feeding lengths and a milling service where required.",
      "planeTo": 0.75
    },
    {
      "id": "PINE-0.75-3",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "F1R",
          "w": 16.71875,
          "h": 2.5,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "F1C",
          "w": 16.71875,
          "h": 2.5,
          "x": 16.96875,
          "y": 0.125
        },
        {
          "id": "DR0H",
          "w": 16.34375,
          "h": 1.96875,
          "x": 33.8125,
          "y": 0.125
        },
        {
          "id": "DL1J",
          "w": 12.96875,
          "h": 1.96875,
          "x": 50.28125,
          "y": 0.125
        },
        {
          "id": "DR1H",
          "w": 12.96875,
          "h": 1.96875,
          "x": 63.375,
          "y": 0.125
        },
        {
          "id": "DL1B",
          "w": 19.328125,
          "h": 1.6875,
          "x": 76.46875,
          "y": 0.125
        },
        {
          "id": "DL1T",
          "w": 19.328125,
          "h": 1.6875,
          "x": 0.125,
          "y": 2.75
        },
        {
          "id": "DR1B",
          "w": 19.328125,
          "h": 1.6875,
          "x": 19.578125,
          "y": 2.75
        },
        {
          "id": "DR1T",
          "w": 19.328125,
          "h": 1.6875,
          "x": 39.03125,
          "y": 2.75
        },
        {
          "id": "DL0H",
          "w": 16.34375,
          "h": 1.6875,
          "x": 58.484375,
          "y": 2.75
        },
        {
          "id": "DR0J",
          "w": 16.34375,
          "h": 1.6875,
          "x": 74.953125,
          "y": 2.75
        }
      ],
      "cutOrder": "horizontal",
      "offcuts": [
        {
          "x": 33.8125,
          "y": 2.21875,
          "w": 62.0625,
          "h": 0.40625
        },
        {
          "x": 76.46875,
          "y": 1.9375,
          "w": 19.40625,
          "h": 0.15625
        },
        {
          "x": 0.125,
          "y": 4.5625,
          "w": 95.75,
          "h": 0.8125
        },
        {
          "x": 91.421875,
          "y": 2.75,
          "w": 4.453125,
          "h": 1.6875
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required Plane the entire supported board to 0.75 inch first; use tool minimum feeding lengths and a milling service where required.",
      "planeTo": 0.75
    },
    {
      "id": "PINE-0.75-4",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "DL0B",
          "w": 15.671875,
          "h": 1.6875,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "DL0T",
          "w": 15.671875,
          "h": 1.6875,
          "x": 0.125,
          "y": 1.9375
        },
        {
          "id": "DR0B",
          "w": 15.671875,
          "h": 1.6875,
          "x": 15.921875,
          "y": 0.125
        },
        {
          "id": "DR0T",
          "w": 15.671875,
          "h": 1.6875,
          "x": 15.921875,
          "y": 1.9375
        },
        {
          "id": "DL1H",
          "w": 12.96875,
          "h": 1.6875,
          "x": 31.71875,
          "y": 0.125
        },
        {
          "id": "DR1J",
          "w": 12.96875,
          "h": 1.6875,
          "x": 31.71875,
          "y": 1.9375
        },
        {
          "id": "RTLR",
          "w": 12.125,
          "h": 1,
          "x": 0.125,
          "y": 3.75
        },
        {
          "id": "RTRL",
          "w": 12.125,
          "h": 1,
          "x": 15.921875,
          "y": 3.75
        },
        {
          "id": "RTRR",
          "w": 12.125,
          "h": 1,
          "x": 31.71875,
          "y": 3.75
        },
        {
          "id": "VLB",
          "w": 10.125,
          "h": 1,
          "x": 44.8125,
          "y": 0.125
        },
        {
          "id": "VLT",
          "w": 10.125,
          "h": 1,
          "x": 44.8125,
          "y": 1.25
        },
        {
          "id": "VRB",
          "w": 10.125,
          "h": 1,
          "x": 44.8125,
          "y": 2.375
        },
        {
          "id": "VRT",
          "w": 10.125,
          "h": 1,
          "x": 44.8125,
          "y": 3.5
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 12.375,
          "y": 3.75,
          "w": 3.421875,
          "h": 1.625
        },
        {
          "x": 0.125,
          "y": 4.875,
          "w": 12.125,
          "h": 0.5
        },
        {
          "x": 28.171875,
          "y": 3.75,
          "w": 3.421875,
          "h": 1.625
        },
        {
          "x": 15.921875,
          "y": 4.875,
          "w": 12.125,
          "h": 0.5
        },
        {
          "x": 43.96875,
          "y": 3.75,
          "w": 0.71875,
          "h": 1.625
        },
        {
          "x": 31.71875,
          "y": 4.875,
          "w": 12.125,
          "h": 0.5
        },
        {
          "x": 55.0625,
          "y": 0.125,
          "w": 40.8125,
          "h": 5.25
        },
        {
          "x": 44.8125,
          "y": 4.625,
          "w": 10.125,
          "h": 0.75
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required Plane the entire supported board to 0.75 inch first; use tool minimum feeding lengths and a milling service where required.",
      "planeTo": 0.75
    },
    {
      "id": "PINE-TRIAL",
      "width": 96,
      "height": 5.5,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "PINE",
      "pieces": [
        {
          "id": "TRIAL-fixed",
          "w": 24,
          "h": 2.5,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "TRIAL-latch-fixed",
          "w": 16,
          "h": 2.5,
          "x": 0.125,
          "y": 2.75
        },
        {
          "id": "TRIAL-door",
          "w": 24,
          "h": 2,
          "x": 24.25,
          "y": 0.125
        },
        {
          "id": "TRIAL-latch-door",
          "w": 16,
          "h": 2,
          "x": 24.25,
          "y": 2.25
        },
        {
          "id": "TRIAL-capture",
          "w": 14,
          "h": 1.5,
          "x": 48.375,
          "y": 0.125
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 16.25,
          "y": 2.75,
          "w": 7.875,
          "h": 2.625
        },
        {
          "x": 40.375,
          "y": 2.25,
          "w": 7.875,
          "h": 3.125
        },
        {
          "x": 24.25,
          "y": 4.375,
          "w": 16,
          "h": 1.0
        },
        {
          "x": 62.5,
          "y": 0.125,
          "w": 33.375,
          "h": 5.25
        },
        {
          "x": 48.375,
          "y": 1.75,
          "w": 14,
          "h": 3.625
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "SOLID-1",
      "width": 96,
      "height": 1.5,
      "trim": 0,
      "endTrim": 0.25,
      "edgeTrim": 0,
      "kerf": 0.125,
      "grain": "x",
      "stock": "SOLID",
      "pieces": [
        {
          "id": "CB",
          "x": 0.25,
          "y": 0,
          "w": 43.71875,
          "h": 1.5
        },
        {
          "id": "CT",
          "x": 44.09375,
          "y": 0,
          "w": 43.71875,
          "h": 1.5
        }
      ],
      "method": "Supported square-stock crosscuts with quarter-inch end trim. Keep the full received 1-1/2-inch section."
    },
    {
      "id": "SOLID-2",
      "width": 96,
      "height": 1.5,
      "trim": 0,
      "endTrim": 0.25,
      "edgeTrim": 0,
      "kerf": 0.125,
      "grain": "x",
      "stock": "SOLID",
      "pieces": [
        {
          "id": "CLB",
          "x": 0.25,
          "y": 0,
          "w": 21.921875,
          "h": 1.5
        },
        {
          "id": "CLT",
          "x": 22.296875,
          "y": 0,
          "w": 21.921875,
          "h": 1.5
        },
        {
          "id": "CRB",
          "x": 44.34375,
          "y": 0,
          "w": 21.921875,
          "h": 1.5
        },
        {
          "id": "CRT",
          "x": 66.390625,
          "y": 0,
          "w": 21.921875,
          "h": 1.5
        }
      ],
      "method": "Supported square-stock crosscuts with quarter-inch end trim. Keep the full received 1-1/2-inch section."
    },
    {
      "id": "SOLID-3",
      "width": 96,
      "height": 1.5,
      "trim": 0,
      "endTrim": 0.25,
      "edgeTrim": 0,
      "kerf": 0.125,
      "grain": "x",
      "stock": "SOLID",
      "pieces": [
        {
          "id": "CR",
          "x": 0.25,
          "y": 0,
          "w": 21.921875,
          "h": 1.5
        },
        {
          "id": "CC",
          "x": 22.296875,
          "y": 0,
          "w": 21.21875,
          "h": 1.5
        },
        {
          "id": "CLU",
          "x": 43.640625,
          "y": 0,
          "w": 19.71875,
          "h": 1.5
        },
        {
          "id": "CRU",
          "x": 63.484375,
          "y": 0,
          "w": 19.71875,
          "h": 1.5
        }
      ],
      "method": "Supported square-stock crosscuts with quarter-inch end trim. Keep the full received 1-1/2-inch section."
    },
    {
      "id": "ACR-1",
      "width": 48,
      "height": 24,
      "trim": 0.125,
      "kerf": 0.125,
      "grain": "x; no rotation",
      "stock": "ACR",
      "pieces": [
        {
          "id": "AL",
          "w": 16.296875,
          "h": 13.59375,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "AR",
          "w": 16.296875,
          "h": 13.59375,
          "x": 16.546875,
          "y": 0.125
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 0.125,
          "y": 13.84375,
          "w": 16.296875,
          "h": 10.03125
        },
        {
          "x": 32.96875,
          "y": 0.125,
          "w": 14.90625,
          "h": 23.75
        },
        {
          "x": 16.546875,
          "y": 13.84375,
          "w": 16.296875,
          "h": 10.03125
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "MESH-1",
      "width": 120,
      "height": 48,
      "trim": 0.125,
      "kerf": 0.0625,
      "grain": "x; no rotation",
      "stock": "MESH",
      "pieces": [
        {
          "id": "MTL",
          "w": 19.5,
          "h": 13.5,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "MTR",
          "w": 19.5,
          "h": 13.5,
          "x": 0.125,
          "y": 13.6875
        },
        {
          "id": "ML",
          "w": 9.5,
          "h": 3.5,
          "x": 0.125,
          "y": 27.25
        },
        {
          "id": "MR",
          "w": 9.5,
          "h": 3.5,
          "x": 0.125,
          "y": 30.8125
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 19.6875,
          "y": 0.125,
          "w": 100.1875,
          "h": 47.75
        },
        {
          "x": 9.6875,
          "y": 27.25,
          "w": 9.9375,
          "h": 20.625
        },
        {
          "x": 0.125,
          "y": 34.375,
          "w": 9.5,
          "h": 13.5
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "PAD-1",
      "width": 36,
      "height": 12,
      "trim": 0.125,
      "kerf": 0.0625,
      "grain": "x; no rotation",
      "stock": "PAD",
      "pieces": [
        {
          "id": "PADLfB",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "PADLfT",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 0.4375
        },
        {
          "id": "PADLrB",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 0.75
        },
        {
          "id": "PADLrT",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 1.0625
        },
        {
          "id": "PADRfB",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 1.375
        },
        {
          "id": "PADRfT",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 1.6875
        },
        {
          "id": "PADRrB",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 2.0
        },
        {
          "id": "PADRrT",
          "w": 16.296875,
          "h": 0.25,
          "x": 0.125,
          "y": 2.3125
        },
        {
          "id": "PADLfL",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 2.625
        },
        {
          "id": "PADLfR",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 2.9375
        },
        {
          "id": "PADLrL",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 3.25
        },
        {
          "id": "PADLrR",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 3.5625
        },
        {
          "id": "PADRfL",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 3.875
        },
        {
          "id": "PADRfR",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 4.1875
        },
        {
          "id": "PADRrL",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 4.5
        },
        {
          "id": "PADRrR",
          "w": 13.09375,
          "h": 0.25,
          "x": 0.125,
          "y": 4.8125
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 16.484375,
          "y": 0.125,
          "w": 19.390625,
          "h": 11.75
        },
        {
          "x": 13.28125,
          "y": 2.625,
          "w": 3.140625,
          "h": 9.25
        },
        {
          "x": 0.125,
          "y": 5.125,
          "w": 13.09375,
          "h": 6.75
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "HSP-1",
      "width": 36,
      "height": 1.5,
      "trim": 0.125,
      "kerf": 0.0625,
      "grain": "x; no rotation",
      "stock": "HSP",
      "pieces": [
        {
          "id": "SP-HL0-left",
          "w": 3,
          "h": 1.0625,
          "x": 0.125,
          "y": 0.125
        },
        {
          "id": "SP-HL0-right",
          "w": 3,
          "h": 1.0625,
          "x": 3.1875,
          "y": 0.125
        },
        {
          "id": "SP-HL1-left",
          "w": 3,
          "h": 1.0625,
          "x": 6.25,
          "y": 0.125
        },
        {
          "id": "SP-HL1-right",
          "w": 3,
          "h": 1.0625,
          "x": 9.3125,
          "y": 0.125
        },
        {
          "id": "SP-HR0-left",
          "w": 3,
          "h": 1.0625,
          "x": 12.375,
          "y": 0.125
        },
        {
          "id": "SP-HR0-right",
          "w": 3,
          "h": 1.0625,
          "x": 15.4375,
          "y": 0.125
        },
        {
          "id": "SP-HR1-left",
          "w": 3,
          "h": 1.0625,
          "x": 18.5,
          "y": 0.125
        },
        {
          "id": "SP-HR1-right",
          "w": 3,
          "h": 1.0625,
          "x": 21.5625,
          "y": 0.125
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 0.125,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        },
        {
          "x": 3.1875,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        },
        {
          "x": 6.25,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        },
        {
          "x": 9.3125,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        },
        {
          "x": 12.375,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        },
        {
          "x": 15.4375,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        },
        {
          "x": 18.5,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        },
        {
          "x": 24.625,
          "y": 0.125,
          "w": 11.25,
          "h": 1.25
        },
        {
          "x": 21.5625,
          "y": 1.25,
          "w": 3,
          "h": 0.125
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "STEEL-1",
      "width": 36,
      "height": 1,
      "trim": 0,
      "endTrim": 0.25,
      "edgeTrim": 0,
      "kerf": 0.125,
      "grain": "x",
      "stock": "LAMP-STEEL",
      "pieces": [
        {
          "id": "LB1",
          "x": 0.25,
          "y": 0,
          "w": 14,
          "h": 1
        },
        {
          "id": "LB2",
          "x": 14.375,
          "y": 0,
          "w": 14,
          "h": 1
        }
      ],
      "method": "Two supported crosscuts, deburr and drill actual transferred stations on a clamped backer."
    },
    {
      "id": "VENEER-1",
      "width": 120,
      "height": 48,
      "trim": 0.25,
      "kerf": 0.0625,
      "grain": "x; no rotation",
      "stock": "VENEER",
      "pieces": [
        {
          "id": "V-floor-under",
          "w": 48.561,
          "h": 24.561,
          "x": 0.25,
          "y": 0.25
        },
        {
          "id": "V-roof-top",
          "w": 48.561,
          "h": 24.561,
          "x": 48.8735,
          "y": 0.25
        },
        {
          "id": "V-TRIAL-bond",
          "w": 12,
          "h": 12,
          "x": 97.497,
          "y": 0.25
        },
        {
          "id": "V-F0B-face",
          "w": 42.09375,
          "h": 4.0,
          "x": 0.25,
          "y": 24.8735
        },
        {
          "id": "V-F0T-face",
          "w": 42.09375,
          "h": 3.0,
          "x": 42.40625,
          "y": 24.8735
        },
        {
          "id": "V-TRIAL-fixed",
          "w": 24.5,
          "h": 3,
          "x": 84.5625,
          "y": 24.8735
        },
        {
          "id": "V-F0L-face",
          "w": 23.09375,
          "h": 3.0,
          "x": 0.25,
          "y": 28.936
        },
        {
          "id": "V-F0R-face",
          "w": 23.09375,
          "h": 3.0,
          "x": 23.40625,
          "y": 28.936
        },
        {
          "id": "V-F0C-face",
          "w": 17.09375,
          "h": 3.0,
          "x": 46.5625,
          "y": 28.936
        },
        {
          "id": "V-TRIAL-door",
          "w": 24.5,
          "h": 2.5,
          "x": 63.71875,
          "y": 28.936
        },
        {
          "id": "V-DL0J-face",
          "w": 16.77975,
          "h": 2.49925,
          "x": 88.28125,
          "y": 28.936
        },
        {
          "id": "V-DR0H-face",
          "w": 16.77975,
          "h": 2.49925,
          "x": 97.497,
          "y": 12.3125
        },
        {
          "id": "V-DL0H-face",
          "w": 16.77975,
          "h": 2.218,
          "x": 97.497,
          "y": 14.87425
        },
        {
          "id": "V-DR0J-face",
          "w": 16.77975,
          "h": 2.218,
          "x": 97.497,
          "y": 17.15475
        },
        {
          "id": "V-DL0B-face",
          "w": 16.046875,
          "h": 2.218,
          "x": 97.497,
          "y": 19.43525
        },
        {
          "id": "V-DL0T-face",
          "w": 16.046875,
          "h": 2.218,
          "x": 97.497,
          "y": 21.71575
        },
        {
          "id": "V-DR0B-face",
          "w": 16.046875,
          "h": 2.218,
          "x": 0.25,
          "y": 31.9985
        },
        {
          "id": "V-DR0T-face",
          "w": 16.046875,
          "h": 2.218,
          "x": 16.359375,
          "y": 31.9985
        },
        {
          "id": "V-L-jamb-bottom",
          "w": 20.046875,
          "h": 2.0,
          "x": 32.46875,
          "y": 31.9985
        },
        {
          "id": "V-L-jamb-top",
          "w": 20.046875,
          "h": 2.0,
          "x": 52.578125,
          "y": 31.9985
        },
        {
          "id": "V-R-jamb-bottom",
          "w": 20.046875,
          "h": 2.0,
          "x": 72.6875,
          "y": 31.9985
        },
        {
          "id": "V-R-jamb-top",
          "w": 20.046875,
          "h": 2.0,
          "x": 92.796875,
          "y": 31.9985
        },
        {
          "id": "V-doorL-bottom",
          "w": 19.764125,
          "h": 2.0,
          "x": 0.25,
          "y": 34.278999999999996
        },
        {
          "id": "V-doorL-top",
          "w": 19.764125,
          "h": 2.0,
          "x": 20.076625,
          "y": 34.278999999999996
        },
        {
          "id": "V-doorR-bottom",
          "w": 19.764125,
          "h": 2.0,
          "x": 39.90325,
          "y": 34.278999999999996
        },
        {
          "id": "V-doorR-top",
          "w": 19.764125,
          "h": 2.0,
          "x": 59.729875,
          "y": 34.278999999999996
        },
        {
          "id": "V-L-jamb-left",
          "w": 17.03275,
          "h": 2.0,
          "x": 79.5565,
          "y": 34.278999999999996
        },
        {
          "id": "V-L-jamb-right",
          "w": 17.03275,
          "h": 2.0,
          "x": 96.65174999999999,
          "y": 34.278999999999996
        },
        {
          "id": "V-R-jamb-left",
          "w": 17.03275,
          "h": 2.0,
          "x": 0.25,
          "y": 36.341499999999996
        },
        {
          "id": "V-R-jamb-right",
          "w": 17.03275,
          "h": 2.0,
          "x": 17.34525,
          "y": 36.341499999999996
        },
        {
          "id": "V-doorL-hinge",
          "w": 16.71875,
          "h": 2.0,
          "x": 34.4405,
          "y": 36.341499999999996
        },
        {
          "id": "V-doorL-latch",
          "w": 16.71875,
          "h": 2.0,
          "x": 51.22175,
          "y": 36.341499999999996
        },
        {
          "id": "V-doorR-hinge",
          "w": 16.71875,
          "h": 2.0,
          "x": 68.003,
          "y": 36.341499999999996
        },
        {
          "id": "V-doorR-latch",
          "w": 16.71875,
          "h": 2.0,
          "x": 84.78425,
          "y": 36.341499999999996
        },
        {
          "id": "V-windowL-bottom",
          "w": 16.046875,
          "h": 2.0,
          "x": 101.5655,
          "y": 36.341499999999996
        },
        {
          "id": "V-windowL-top",
          "w": 16.046875,
          "h": 2.0,
          "x": 0.25,
          "y": 38.403999999999996
        },
        {
          "id": "V-windowR-bottom",
          "w": 16.046875,
          "h": 2.0,
          "x": 16.359375,
          "y": 38.403999999999996
        },
        {
          "id": "V-windowR-top",
          "w": 16.046875,
          "h": 2.0,
          "x": 32.46875,
          "y": 38.403999999999996
        },
        {
          "id": "V-windowL-left",
          "w": 13.28275,
          "h": 2.0,
          "x": 48.578125,
          "y": 38.403999999999996
        },
        {
          "id": "V-windowL-right",
          "w": 13.28275,
          "h": 2.0,
          "x": 61.923375,
          "y": 38.403999999999996
        },
        {
          "id": "V-windowR-left",
          "w": 13.28275,
          "h": 2.0,
          "x": 75.268625,
          "y": 38.403999999999996
        },
        {
          "id": "V-windowR-right",
          "w": 13.28275,
          "h": 2.0,
          "x": 88.61387500000001,
          "y": 38.403999999999996
        },
        {
          "id": "V-P03L-front",
          "w": 23.09375,
          "h": 1.233625,
          "x": 0.25,
          "y": 40.466499999999996
        },
        {
          "id": "V-P03L-back",
          "w": 23.09375,
          "h": 1.233625,
          "x": 23.40625,
          "y": 40.466499999999996
        },
        {
          "id": "V-P03R-front",
          "w": 23.09375,
          "h": 1.233625,
          "x": 46.5625,
          "y": 40.466499999999996
        },
        {
          "id": "V-P03R-back",
          "w": 23.09375,
          "h": 1.233625,
          "x": 69.71875,
          "y": 40.466499999999996
        },
        {
          "id": "V-P01-front",
          "w": 48.561,
          "h": 1.203125,
          "x": 0.25,
          "y": 41.762625
        },
        {
          "id": "V-P01-back",
          "w": 48.561,
          "h": 1.203125,
          "x": 48.8735,
          "y": 41.762625
        },
        {
          "id": "V-P02-front",
          "w": 48.561,
          "h": 1.203125,
          "x": 0.25,
          "y": 43.02825
        },
        {
          "id": "V-P02-back",
          "w": 48.561,
          "h": 1.203125,
          "x": 48.8735,
          "y": 43.02825
        },
        {
          "id": "V-P01-left",
          "w": 24.5,
          "h": 1.203125,
          "x": 92.875,
          "y": 40.466499999999996
        },
        {
          "id": "V-P01-right",
          "w": 24.5,
          "h": 1.203125,
          "x": 0.25,
          "y": 44.293875
        },
        {
          "id": "V-P02-left",
          "w": 24.5,
          "h": 1.203125,
          "x": 24.8125,
          "y": 44.293875
        },
        {
          "id": "V-P02-right",
          "w": 24.5,
          "h": 1.203125,
          "x": 49.375,
          "y": 44.293875
        },
        {
          "id": "V-roof-L-front",
          "w": 18.5,
          "h": 1.203125,
          "x": 97.497,
          "y": 41.762625
        },
        {
          "id": "V-roof-L-back",
          "w": 18.5,
          "h": 1.203125,
          "x": 97.497,
          "y": 43.02825
        },
        {
          "id": "V-roof-R-front",
          "w": 18.5,
          "h": 1.203125,
          "x": 73.9375,
          "y": 44.293875
        },
        {
          "id": "V-roof-R-back",
          "w": 18.5,
          "h": 1.203125,
          "x": 92.5,
          "y": 44.293875
        },
        {
          "id": "V-roof-L-left",
          "w": 12.439,
          "h": 1.203125,
          "x": 101.959125,
          "y": 38.403999999999996
        },
        {
          "id": "V-roof-L-right",
          "w": 12.439,
          "h": 1.203125,
          "x": 0.25,
          "y": 45.5595
        },
        {
          "id": "V-roof-R-left",
          "w": 12.439,
          "h": 1.203125,
          "x": 12.7515,
          "y": 45.5595
        },
        {
          "id": "V-roof-R-right",
          "w": 12.439,
          "h": 1.203125,
          "x": 25.253,
          "y": 45.5595
        },
        {
          "id": "V-P03L-vent-bottom",
          "w": 8.5,
          "h": 1.203125,
          "x": 111.0625,
          "y": 44.293875
        },
        {
          "id": "V-P03L-vent-top",
          "w": 8.5,
          "h": 1.203125,
          "x": 37.7545,
          "y": 45.5595
        },
        {
          "id": "V-P03R-vent-bottom",
          "w": 8.5,
          "h": 1.203125,
          "x": 46.317,
          "y": 45.5595
        },
        {
          "id": "V-P03R-vent-top",
          "w": 8.5,
          "h": 1.203125,
          "x": 54.8795,
          "y": 45.5595
        },
        {
          "id": "V-P03L-vent-near",
          "w": 2.439,
          "h": 1.203125,
          "x": 116.0595,
          "y": 41.762625
        },
        {
          "id": "V-P03L-vent-far",
          "w": 2.439,
          "h": 1.203125,
          "x": 116.0595,
          "y": 43.02825
        },
        {
          "id": "V-P03R-vent-near",
          "w": 2.439,
          "h": 1.203125,
          "x": 114.460625,
          "y": 38.403999999999996
        },
        {
          "id": "V-P03R-vent-far",
          "w": 2.439,
          "h": 1.203125,
          "x": 63.442,
          "y": 45.5595
        }
      ],
      "cutOrder": "horizontal",
      "offcuts": [
        {
          "x": 109.5595,
          "y": 0.25,
          "w": 10.190499999999993,
          "h": 12
        },
        {
          "x": 42.40625,
          "y": 27.936,
          "w": 77.34375,
          "h": 0.9375
        },
        {
          "x": 109.125,
          "y": 24.8735,
          "w": 10.625,
          "h": 3
        },
        {
          "x": 63.71875,
          "y": 31.4985,
          "w": 56.03125,
          "h": 0.4375
        },
        {
          "x": 105.1235,
          "y": 28.936,
          "w": 14.6265,
          "h": 2.49925
        },
        {
          "x": 114.33924999999999,
          "y": 12.3125,
          "w": 5.410749999999993,
          "h": 2.49925
        },
        {
          "x": 114.33924999999999,
          "y": 14.87425,
          "w": 5.410749999999993,
          "h": 2.218
        },
        {
          "x": 114.33924999999999,
          "y": 17.15475,
          "w": 5.410749999999993,
          "h": 2.218
        },
        {
          "x": 113.606375,
          "y": 19.43525,
          "w": 6.143624999999993,
          "h": 2.218
        },
        {
          "x": 113.606375,
          "y": 21.71575,
          "w": 6.143624999999993,
          "h": 2.218
        },
        {
          "x": 97.497,
          "y": 23.99625,
          "w": 22.252999999999993,
          "h": 0.8147500000000001
        },
        {
          "x": 32.46875,
          "y": 34.061,
          "w": 87.28125,
          "h": 0.15549999999999997
        },
        {
          "x": 112.90625,
          "y": 31.9985,
          "w": 6.84375,
          "h": 2.0
        },
        {
          "x": 113.74699999999999,
          "y": 34.278999999999996,
          "w": 6.002999999999986,
          "h": 2.0
        },
        {
          "x": 117.674875,
          "y": 36.341499999999996,
          "w": 2.075125000000014,
          "h": 2.0
        },
        {
          "x": 117.4375,
          "y": 40.466499999999996,
          "w": 2.3125,
          "h": 1.203125
        },
        {
          "x": 101.959125,
          "y": 39.669624999999996,
          "w": 17.790875,
          "h": 0.734375
        },
        {
          "x": 0.25,
          "y": 46.825125,
          "w": 119.5,
          "h": 0.9248750000000001
        },
        {
          "x": 119.625,
          "y": 44.293875,
          "w": 0.125,
          "h": 1.203125
        },
        {
          "x": 118.561,
          "y": 41.762625,
          "w": 1.188999999999993,
          "h": 1.203125
        },
        {
          "x": 118.561,
          "y": 43.02825,
          "w": 1.188999999999993,
          "h": 1.203125
        },
        {
          "x": 116.96212499999999,
          "y": 38.403999999999996,
          "w": 2.7878749999999997,
          "h": 1.203125
        },
        {
          "x": 65.9435,
          "y": 45.5595,
          "w": 53.80650000000002,
          "h": 1.203125
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    },
    {
      "id": "VENEER-2",
      "width": 120,
      "height": 48,
      "trim": 0.25,
      "kerf": 0.0625,
      "grain": "x; no rotation",
      "stock": "VENEER",
      "pieces": [
        {
          "id": "V-P03L-face",
          "w": 23.09375,
          "h": 24.5,
          "x": 0.25,
          "y": 0.25
        },
        {
          "id": "V-P03R-face",
          "w": 23.09375,
          "h": 24.5,
          "x": 23.40625,
          "y": 0.25
        },
        {
          "id": "V-back",
          "w": 47.09375,
          "h": 23.09375,
          "x": 46.5625,
          "y": 0.25
        }
      ],
      "cutOrder": "vertical",
      "offcuts": [
        {
          "x": 0.25,
          "y": 24.8125,
          "w": 23.09375,
          "h": 22.9375
        },
        {
          "x": 23.40625,
          "y": 24.8125,
          "w": 23.09375,
          "h": 22.9375
        },
        {
          "x": 93.71875,
          "y": 0.25,
          "w": 26.03125,
          "h": 47.5
        },
        {
          "x": 46.5625,
          "y": 23.40625,
          "w": 47.09375,
          "h": 24.34375
        }
      ],
      "method": "Grain-fixed guillotine allocation; defect-free stock; safe tool/hold-down rehearsal required"
    }
  ],
  "generatorBindings": [
    {
      "path": "production/derive.py",
      "sha256": "40dc471a58098e4bb39624ee45c17bb88cf3d727be8523cb90bc9a362294c89e"
    },
    {
      "path": "production/schedules.py",
      "sha256": "3fc3b928bd02c16577ee2f5c6625ec9069d2d3fbfe582268e8702ce1a7eb22e6"
    },
    {
      "path": "production/solid.py",
      "sha256": "6035ba485254d7d603b712e840cdd811cf2192083190e55cd0f936183568fda8"
    },
    {
      "path": "production/synchronize_metadata.py",
      "sha256": "c2be680eac2ad2b0edd989a2091e89412ab7a10d12b59d052e7802bf301c4481"
    }
  ],
  "metadataReview": "Superseded baseline summaries corrected to explicit current geometry. Archived baseline fields remain provenance only."
}