{ "buildId": "p02-01", "revision": "v5-candidate-01", "exteriorInches": [ 24, 18, 18 ], "status": "V5 candidate 01 for owner review; no publication, physical-test or animal-use approval", "derivedFrom": "Published P02-01 Opus r14 source, with r13 construction; preserved baseline is identified by baselineSha256", "parts": [ { "id": "P01", "name": "Floor", "lo": [ 0, 0, 0 ], "size": [ 24.0, 18.0, 0.703 ], "material": "plywood", "step": 5, "group": "shell", "grainAxis": 1 }, { "id": "P02", "name": "Roof", "lo": [ 0, 0, 17.297 ], "size": [ 24.0, 18.0, 0.703 ], "material": "plywood", "step": 9, "group": "roof", "opening": [ 2, 4, 20, 10 ], "holes": [ { "center": [ 4.75, 3.5 ], "diameter": 0.265625 }, { "center": [ 4.75, 14.5 ], "diameter": 0.265625 }, { "center": [ 9.25, 3.5 ], "diameter": 0.265625 }, { "center": [ 9.25, 14.5 ], "diameter": 0.265625 } ], "grainAxis": 1 }, { "id": "P03", "name": "Left side", "lo": [ 0, 0, 0.703 ], "size": [ 0.703, 18.0, 16.594 ], "material": "plywood", "step": 2, "group": "shell", "opening": [ 6, 3.703, 6, 1.5 ], "grainAxis": 2 }, { "id": "P04", "name": "Right side", "lo": [ 23.297, 0, 0.703 ], "size": [ 0.703, 18.0, 16.594 ], "material": "plywood", "step": 2, "group": "shell", "opening": [ 6, 3.703, 6, 1.5 ], "grainAxis": 2 }, { "id": "P05", "name": "Back", "lo": [ 0.703, 17.297, 0.703 ], "size": [ 22.594, 0.703, 16.594 ], "material": "plywood", "step": 5, "group": "shell", "grainAxis": 2 }, { "id": "C1", "name": "Solid cleat C1", "lo": [ 0.703, 1.5, 0.703 ], "size": [ 1.5, 15.797, 1.5 ], "material": "pine", "step": 3, "group": "shell" }, { "id": "C2", "name": "Solid cleat C2", "lo": [ 21.797, 1.5, 0.703 ], "size": [ 1.5, 15.797, 1.5 ], "material": "pine", "step": 3, "group": "shell" }, { "id": "C5", "name": "Solid cleat C5", "lo": [ 2.203, 15.797, 0.703 ], "size": [ 19.594, 1.5, 1.5 ], "material": "pine", "step": 3, "group": "shell" }, { "id": "C6", "name": "Solid cleat C6", "lo": [ 2.203, 15.797, 15.797 ], "size": [ 19.594, 1.5, 1.5 ], "material": "pine", "step": 3, "group": "shell" }, { "id": "C7", "name": "Solid cleat C7", "lo": [ 0.703, 15.797, 2.203 ], "size": [ 1.5, 1.5, 15.094000000000001 ], "material": "pine", "step": 3, "group": "shell" }, { "id": "C8", "name": "Solid cleat C8", "lo": [ 21.797, 15.797, 2.203 ], "size": [ 1.5, 1.5, 15.094000000000001 ], "material": "pine", "step": 3, "group": "shell" }, { "id": "MSL", "name": "L side vent mesh", "lo": [ 0.703, 5.25, 2.953 ], "size": [ 0.0625, 7.5, 3 ], "material": "mesh", "step": 6, "group": "shell", "openingAperture": 0.25, "wireDiameter": 0.0258, "thicknessBasis": "1/16-inch conservative crossing envelope; measure received woven cloth at a crossing. Not a spacer or permitted open retention gap." }, { "id": "VLB", "name": "L vent retaining batten B", "lo": [ 0.7655, 5, 2.703 ], "size": [ 0.75, 8, 1 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "VLT", "name": "L vent retaining batten T", "lo": [ 0.7655, 5, 5.203 ], "size": [ 0.75, 8, 1 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "VLF", "name": "L vent retaining batten F", "lo": [ 0.7655, 5, 3.703 ], "size": [ 0.75, 1, 1.5 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "VLR", "name": "L vent retaining batten R", "lo": [ 0.7655, 12, 3.703 ], "size": [ 0.75, 1, 1.5 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "MSR", "name": "R side vent mesh", "lo": [ 23.2345, 5.25, 2.953 ], "size": [ 0.0625, 7.5, 3 ], "material": "mesh", "step": 6, "group": "shell", "openingAperture": 0.25, "wireDiameter": 0.0258, "thicknessBasis": "1/16-inch conservative crossing envelope; measure received woven cloth at a crossing. Not a spacer or permitted open retention gap." }, { "id": "VRB", "name": "R vent retaining batten B", "lo": [ 22.4845, 5, 2.703 ], "size": [ 0.75, 8, 1 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "VRT", "name": "R vent retaining batten T", "lo": [ 22.4845, 5, 5.203 ], "size": [ 0.75, 8, 1 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "VRF", "name": "R vent retaining batten F", "lo": [ 22.4845, 5, 3.703 ], "size": [ 0.75, 1, 1.5 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "VRR", "name": "R vent retaining batten R", "lo": [ 22.4845, 12, 3.703 ], "size": [ 0.75, 1, 1.5 ], "material": "pine", "step": 6, "group": "shell" }, { "id": "MR", "name": "Roof mesh", "lo": [ 1.25, 3.25, 17.2345 ], "size": [ 21.5, 11.5, 0.0625 ], "material": "mesh", "step": 9, "group": "roof", "openingAperture": 0.25, "wireDiameter": 0.0258, "thicknessBasis": "1/16-inch conservative crossing envelope; measure received woven cloth at a crossing. Not a spacer or permitted open retention gap." }, { "id": "RB1", "name": "Roof retaining batten", "lo": [ 1, 3, 16.4845 ], "size": [ 22, 1, 0.75 ], "material": "pine", "step": 9, "group": "roof", "topNotches": [ { "x": 4.25, "width": 1, "depth": 0.125 }, { "x": 8.75, "width": 1, "depth": 0.125 } ], "holes": [ { "center": [ 4.75, 3.5 ], "diameter": 0.265625 }, { "center": [ 9.25, 3.5 ], "diameter": 0.265625 } ] }, { "id": "RB2", "name": "Roof retaining batten", "lo": [ 1, 14, 16.4845 ], "size": [ 22, 1, 0.75 ], "material": "pine", "step": 9, "group": "roof", "topNotches": [ { "x": 4.25, "width": 1, "depth": 0.125 }, { "x": 8.75, "width": 1, "depth": 0.125 } ], "holes": [ { "center": [ 4.75, 14.5 ], "diameter": 0.265625 }, { "center": [ 9.25, 14.5 ], "diameter": 0.265625 } ] }, { "id": "RB3", "name": "Roof retaining batten", "lo": [ 1, 4, 16.4845 ], "size": [ 1, 10, 0.75 ], "material": "pine", "step": 9, "group": "roof" }, { "id": "RB4", "name": "Roof retaining batten", "lo": [ 22, 4, 16.4845 ], "size": [ 1, 10, 0.75 ], "material": "pine", "step": 9, "group": "roof" }, { "id": "F01", "name": "Continuous plywood front surround", "lo": [ 0.703, 0, 0.703 ], "size": [ 22.594, 0.703, 16.594 ], "material": "plywood", "step": 8, "group": "front", "opening": [ 2.203, 2.203, 19.594, 13.594000000000001 ], "openingAxis": 1, "grainAxis": 2 }, { "id": "FCB", "name": "Front lower receiver", "lo": [ 2.203, 0.703, 0.703 ], "size": [ 19.594, 1.5, 1.5 ], "material": "pine", "step": 8, "group": "front" }, { "id": "FCT", "name": "Front roof receiver", "lo": [ 2.203, 0.703, 15.797 ], "size": [ 19.594, 1.5, 1.5 ], "material": "pine", "step": 8, "group": "front" }, { "id": "FCL", "name": "Front left receiver", "lo": [ 0.703, 0.703, 2.203 ], "size": [ 1.5, 1.5, 13.594000000000001 ], "material": "pine", "step": 8, "group": "front" }, { "id": "FCR", "name": "Continuous right receiver", "lo": [ 21.797, 0.703, 2.203 ], "size": [ 1.5, 1.5, 13.594 ], "material": "pine", "step": 8, "group": "front" }, { "id": "D01", "name": "Continuous plywood door ring", "lo": [ 2.2655, 0, 2.2655 ], "size": [ 19.469, 0.703, 13.469000000000001 ], "material": "plywood", "step": 8, "group": "door", "opening": [ 3.7655, 3.7655, 15.469000000000001, 10.469000000000001 ], "openingAxis": 1, "grainAxis": 2 }, { "id": "G01", "name": "Floating undrilled acrylic pane", "lo": [ 3.2655, 0.703, 3.2655 ], "size": [ 16.469, 0.22, 11.469000000000001 ], "material": "acrylic", "step": 8, "group": "door" }, { "id": "GSB", "name": "Glazing spacer B", "lo": [ 2.7655, 0.703, 2.7655 ], "size": [ 17.469, 0.25, 0.4375 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "GST", "name": "Glazing spacer T", "lo": [ 2.7655, 0.703, 14.797 ], "size": [ 17.469, 0.25, 0.4375 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "GSL", "name": "Glazing spacer L", "lo": [ 2.7655, 0.703, 3.203 ], "size": [ 0.4375, 0.25, 11.594000000000001 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "GSR", "name": "Glazing spacer R", "lo": [ 19.797, 0.703, 3.203 ], "size": [ 0.4375, 0.25, 11.594000000000001 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "GCB", "name": "Glazing cap B", "lo": [ 2.7655, 0.953, 2.7655 ], "size": [ 17.469, 0.25, 1 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "GCT", "name": "Glazing cap T", "lo": [ 2.7655, 0.953, 14.2345 ], "size": [ 17.469, 0.25, 1 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "GCL", "name": "Glazing cap L", "lo": [ 2.7655, 0.953, 3.7655 ], "size": [ 1, 0.25, 10.469000000000001 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "GCR", "name": "Glazing cap R", "lo": [ 19.2345, 0.953, 3.7655 ], "size": [ 1, 0.25, 10.469000000000001 ], "material": "poplar", "step": 8, "group": "door" }, { "id": "DSL", "name": "Door stop DSL", "lo": [ 2.203, 0.73425, 2.203 ], "size": [ 0.5, 0.75, 13.594000000000001 ], "material": "pine", "step": 8, "group": "front" }, { "id": "DSR", "name": "Continuous right door stop", "lo": [ 21.297, 0.73425, 2.203 ], "size": [ 0.5, 0.75, 13.594 ], "material": "pine", "step": 8, "group": "front" }, { "id": "DSB", "name": "Door stop DSB", "lo": [ 2.703, 0.73425, 2.203 ], "size": [ 18.594, 0.75, 0.5 ], "material": "pine", "step": 8, "group": "front" }, { "id": "DST", "name": "Door stop DST", "lo": [ 2.703, 0.73425, 15.297 ], "size": [ 18.594, 0.75, 0.5 ], "material": "pine", "step": 8, "group": "front" }, { "id": "LB1", "name": "Steel support under lamp area", "lo": [ 4.25, 3, 17.1095 ], "size": [ 1, 12, 0.125 ], "material": "steel", "group": "roof", "step": 9, "product": "L15", "holes": [ { "center": [ 4.75, 3.5 ], "diameter": 0.265625 }, { "center": [ 4.75, 14.5 ], "diameter": 0.265625 } ] }, { "id": "LB2", "name": "Steel support under lamp area", "lo": [ 8.75, 3, 17.1095 ], "size": [ 1, 12, 0.125 ], "material": "steel", "group": "roof", "step": 9, "product": "L15", "holes": [ { "center": [ 9.25, 3.5 ], "diameter": 0.265625 }, { "center": [ 9.25, 14.5 ], "diameter": 0.265625 } ] }, { "id": "B-LB1-1", "name": "Lamp support bolt, washers and locknut", "lo": [ 4.375, 3.125, 16.0625 ], "size": [ 0.75, 0.75, 2.15625 ], "material": "steel", "group": "roof", "step": 9, "shape": "roof-through-bolt", "dimensionBasis": "Nominal purchased 1/4-20 × 2-inch assembly; received washer/nut thickness governs engagement check." }, { "id": "B-LB1-2", "name": "Lamp support bolt, washers and locknut", "lo": [ 4.375, 14.125, 16.0625 ], "size": [ 0.75, 0.75, 2.15625 ], "material": "steel", "group": "roof", "step": 9, "shape": "roof-through-bolt", "dimensionBasis": "Nominal purchased 1/4-20 × 2-inch assembly; received washer/nut thickness governs engagement check." }, { "id": "B-LB2-1", "name": "Lamp support bolt, washers and locknut", "lo": [ 8.875, 3.125, 16.0625 ], "size": [ 0.75, 0.75, 2.15625 ], "material": "steel", "group": "roof", "step": 9, "shape": "roof-through-bolt", "dimensionBasis": "Nominal purchased 1/4-20 × 2-inch assembly; received washer/nut thickness governs engagement check." }, { "id": "B-LB2-2", "name": "Lamp support bolt, washers and locknut", "lo": [ 8.875, 14.125, 16.0625 ], "size": [ 0.75, 0.75, 2.15625 ], "material": "steel", "group": "roof", "step": 9, "shape": "roof-through-bolt", "dimensionBasis": "Nominal purchased 1/4-20 × 2-inch assembly; received washer/nut thickness governs engagement check." }, { "id": "H1-fixed", "name": "NH-40R/SS hinge 1, fixed leaf", "lo": [ 1.6436988188976376, -0.2755905511811024, 3.5 ], "size": [ 0.7283464566929134, 0.2755905511811024, 1.5748031496062993 ], "material": "stainless", "group": "front", "step": 12, "shape": "lift-off-hinge-leaf", "hardwareSide": "fixed", "axis": [ 2.23425, -0.1377952755905512 ], "model": "NH-40R/SS", "dimensionBasis": "40 mm height, 30 mm total width, 1.5 mm leaf, 16 × 20 mm hole pitches. Knuckle profile is illustrative." }, { "id": "H1-moving", "name": "NH-40R/SS hinge 1, moving leaf", "lo": [ 2.0964547244094485, -0.2755905511811024, 3.5 ], "size": [ 0.7283464566929134, 0.2755905511811024, 1.5748031496062993 ], "material": "stainless", "group": "door", "step": 12, "shape": "lift-off-hinge-leaf", "hardwareSide": "moving", "axis": [ 2.23425, -0.1377952755905512 ], "model": "NH-40R/SS", "dimensionBasis": "40 mm height, 30 mm total width, 1.5 mm leaf, 16 × 20 mm hole pitches. Knuckle profile is illustrative." }, { "id": "H1-pin", "name": "Hinge 1 fixed lift-off pin", "lo": [ 2.1653523622047244, -0.2066929133858268, 4.28740157480315 ], "size": [ 0.1377952755905512, 0.1377952755905512, 0.7874015748031497 ], "material": "stainless", "group": "front", "step": 12, "shape": "hinge-pin", "dimensionBasis": "Illustrative pin inside the manufacturer leaf envelope, not a manufactured pin specification." }, { "id": "H1-fixed-s1", "name": "Hinge 1 screw head", "lo": [ 1.8542893700787402, -0.064, 3.828700787401575 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "front", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "H1-fixed-s2", "name": "Hinge 1 screw head", "lo": [ 1.8542893700787402, -0.064, 4.616102362204724 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "front", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "H1-moving-s1", "name": "Hinge 1 screw head", "lo": [ 2.4842106299212596, -0.064, 3.828700787401575 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "door", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "H1-moving-s2", "name": "Hinge 1 screw head", "lo": [ 2.4842106299212596, -0.064, 4.616102362204724 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "door", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "H2-fixed", "name": "NH-40R/SS hinge 2, fixed leaf", "lo": [ 1.6436988188976376, -0.2755905511811024, 12.5 ], "size": [ 0.7283464566929134, 0.2755905511811024, 1.5748031496062993 ], "material": "stainless", "group": "front", "step": 12, "shape": "lift-off-hinge-leaf", "hardwareSide": "fixed", "axis": [ 2.23425, -0.1377952755905512 ], "model": "NH-40R/SS", "dimensionBasis": "40 mm height, 30 mm total width, 1.5 mm leaf, 16 × 20 mm hole pitches. Knuckle profile is illustrative." }, { "id": "H2-moving", "name": "NH-40R/SS hinge 2, moving leaf", "lo": [ 2.0964547244094485, -0.2755905511811024, 12.5 ], "size": [ 0.7283464566929134, 0.2755905511811024, 1.5748031496062993 ], "material": "stainless", "group": "door", "step": 12, "shape": "lift-off-hinge-leaf", "hardwareSide": "moving", "axis": [ 2.23425, -0.1377952755905512 ], "model": "NH-40R/SS", "dimensionBasis": "40 mm height, 30 mm total width, 1.5 mm leaf, 16 × 20 mm hole pitches. Knuckle profile is illustrative." }, { "id": "H2-pin", "name": "Hinge 2 fixed lift-off pin", "lo": [ 2.1653523622047244, -0.2066929133858268, 13.28740157480315 ], "size": [ 0.1377952755905512, 0.1377952755905512, 0.7874015748031497 ], "material": "stainless", "group": "front", "step": 12, "shape": "hinge-pin", "dimensionBasis": "Illustrative pin inside the manufacturer leaf envelope, not a manufactured pin specification." }, { "id": "H2-fixed-s1", "name": "Hinge 2 screw head", "lo": [ 1.8542893700787402, -0.064, 12.828700787401575 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "front", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "H2-fixed-s2", "name": "Hinge 2 screw head", "lo": [ 1.8542893700787402, -0.064, 13.616102362204725 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "front", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "H2-moving-s1", "name": "Hinge 2 screw head", "lo": [ 2.4842106299212596, -0.064, 12.828700787401575 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "door", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "H2-moving-s2", "name": "Hinge 2 screw head", "lo": [ 2.4842106299212596, -0.064, 13.616102362204725 ], "size": [ 0.13, 0.064, 0.13 ], "material": "stainless", "group": "door", "step": 12, "shape": "screw-head", "product": "H02", "dimensionBasis": "Visible head envelope; actual screw fit is governed by the retained offcut trial." }, { "id": "HP-base", "name": "Hasp mounting leaf", "lo": [ 21.8, -0.07, 8.25 ], "size": [ 1.28, 0.07, 1.5 ], "material": "black", "step": 13, "group": "front", "product": "H04", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "hasp-base" }, { "id": "HP-pin", "name": "Hasp hinge pin", "lo": [ 22.985, -0.235, 8.25 ], "size": [ 0.19, 0.19, 1.5 ], "material": "black", "step": 13, "group": "front", "product": "H04", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "hinge-pin" }, { "id": "HP-flap", "name": "Slotted hasp flap", "lo": [ 19.88, -0.37, 8.25 ], "size": [ 3.2, 0.265, 1.5 ], "material": "black", "step": 13, "group": "front", "product": "H04", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "hasp-flap" }, { "id": "ST-base", "name": "Swivel-staple mounting plate", "lo": [ 19.995, -0.07, 8.205 ], "size": [ 1.59, 0.07, 1.59 ], "material": "black", "step": 13, "group": "door", "product": "H04", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "staple-base" }, { "id": "ST-washer", "name": "Swivel spring washer housing", "lo": [ 20.24, -0.26, 8.45 ], "size": [ 1.1, 0.19, 1.1 ], "material": "black", "step": 13, "group": "door", "product": "H04", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "staple-housing" }, { "id": "ST-tab", "name": "Hand-operated swivel staple", "lo": [ 20.695, -1.2, 8.455 ], "size": [ 0.19, 1.06, 1.09 ], "material": "black", "step": 13, "group": "door", "product": "H04", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "staple-tab" }, { "id": "HP1-head", "name": "Latch screw head", "lo": [ 21.93, -0.07, 8.82 ], "size": [ 0.36, 0.025, 0.36 ], "material": "stainless", "step": 13, "group": "front", "product": "H05", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "screw-head" }, { "id": "HP2-head", "name": "Latch screw head", "lo": [ 22.3, -0.07, 9.32 ], "size": [ 0.36, 0.025, 0.36 ], "material": "stainless", "step": 13, "group": "front", "product": "H05", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "screw-head" }, { "id": "HP3-head", "name": "Latch screw head", "lo": [ 22.4, -0.07, 8.32 ], "size": [ 0.36, 0.025, 0.36 ], "material": "stainless", "step": 13, "group": "front", "product": "H05", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "screw-head" }, { "id": "ST1-head", "name": "Latch screw head", "lo": [ 20.05, -0.07, 8.26 ], "size": [ 0.36, 0.025, 0.36 ], "material": "stainless", "step": 13, "group": "door", "product": "H05", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "screw-head" }, { "id": "ST2-head", "name": "Latch screw head", "lo": [ 21.17, -0.07, 8.26 ], "size": [ 0.36, 0.025, 0.36 ], "material": "stainless", "step": 13, "group": "door", "product": "H05", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "screw-head" }, { "id": "ST3-head", "name": "Latch screw head", "lo": [ 20.05, -0.07, 9.38 ], "size": [ 0.36, 0.025, 0.36 ], "material": "stainless", "step": 13, "group": "door", "product": "H05", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "screw-head" }, { "id": "ST4-head", "name": "Latch screw head", "lo": [ 21.17, -0.07, 9.38 ], "size": [ 0.36, 0.025, 0.36 ], "material": "stainless", "step": 13, "group": "door", "product": "H05", "dimensionBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template.", "shape": "screw-head" } ], "screws": [ { "id": "VL1", "start": [ 0, 5.5, 3.203 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLB", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VL2", "start": [ 0, 9, 3.203 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLB", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VL3", "start": [ 0, 12.5, 3.203 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLB", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VL4", "start": [ 0, 5.5, 5.703 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLT", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VL5", "start": [ 0, 9, 5.703 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLT", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VL6", "start": [ 0, 12.5, 5.703 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLT", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VL7", "start": [ 0, 5.5, 4.453 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLF", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VL8", "start": [ 0, 12.5, 4.453 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VLR", "step": 6, "group": "shell", "through": [ "P03", "MSL" ], "product": "L06" }, { "id": "VR1", "start": [ 24.0, 5.5, 3.203 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRB", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "VR2", "start": [ 24.0, 9, 3.203 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRB", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "VR3", "start": [ 24.0, 12.5, 3.203 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRB", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "VR4", "start": [ 24.0, 5.5, 5.703 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRT", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "VR5", "start": [ 24.0, 9, 5.703 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRT", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "VR6", "start": [ 24.0, 12.5, 5.703 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRT", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "VR7", "start": [ 24.0, 5.5, 4.453 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRF", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "VR8", "start": [ 24.0, 12.5, 4.453 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "VRR", "step": 6, "group": "shell", "through": [ "P04", "MSR" ], "product": "L06" }, { "id": "SLB0", "start": [ 0, 3.5, 1.4529999999999998 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C1", "step": 5, "group": "shell", "through": [ "P03" ], "product": "L06" }, { "id": "SLB1", "start": [ 0, 9.5, 1.4529999999999998 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C1", "step": 5, "group": "shell", "through": [ "P03" ], "product": "L06" }, { "id": "SLB2", "start": [ 0, 16, 1.4529999999999998 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C1", "step": 5, "group": "shell", "through": [ "P03" ], "product": "L06" }, { "id": "SLR0", "start": [ 0, 16.547, 5.703 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C7", "step": 5, "group": "shell", "through": [ "P03" ], "product": "L06" }, { "id": "SLR1", "start": [ 0, 16.547, 13.703 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C7", "step": 5, "group": "shell", "through": [ "P03" ], "product": "L06" }, { "id": "SRB0", "start": [ 24.0, 3.5, 1.4529999999999998 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C2", "step": 5, "group": "shell", "through": [ "P04" ], "product": "L06" }, { "id": "SRB1", "start": [ 24.0, 9.5, 1.4529999999999998 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C2", "step": 5, "group": "shell", "through": [ "P04" ], "product": "L06" }, { "id": "SRB2", "start": [ 24.0, 16, 1.4529999999999998 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C2", "step": 5, "group": "shell", "through": [ "P04" ], "product": "L06" }, { "id": "SRR0", "start": [ 24.0, 16.547, 5.703 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C8", "step": 5, "group": "shell", "through": [ "P04" ], "product": "L06" }, { "id": "SRR1", "start": [ 24.0, 16.547, 13.703 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C8", "step": 5, "group": "shell", "through": [ "P04" ], "product": "L06" }, { "id": "BKB0", "start": [ 5, 18.0, 1.4529999999999998 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C5", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKB1", "start": [ 12, 18.0, 1.4529999999999998 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C5", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKB2", "start": [ 19, 18.0, 1.4529999999999998 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C5", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKT0", "start": [ 5, 18.0, 16.547 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C6", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKT1", "start": [ 12, 18.0, 16.547 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C6", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKT2", "start": [ 19, 18.0, 16.547 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C6", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKV1.4529999999999998-3.703", "start": [ 1.4529999999999998, 18.0, 3.703 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C7", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKV1.4529999999999998-11.703", "start": [ 1.4529999999999998, 18.0, 11.703 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C7", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKV22.547-3.703", "start": [ 22.547, 18.0, 3.703 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C8", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "BKV22.547-11.703", "start": [ 22.547, 18.0, 11.703 ], "axis": [ 0, -1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C8", "step": 5, "group": "shell", "through": [ "P05" ], "product": "L06" }, { "id": "FL1.4529999999999998-5", "start": [ 1.4529999999999998, 5, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C1", "step": 5, "group": "shell", "through": [ "P01" ], "product": "L06" }, { "id": "FL1.4529999999999998-14", "start": [ 1.4529999999999998, 14, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C1", "step": 5, "group": "shell", "through": [ "P01" ], "product": "L06" }, { "id": "FL22.547-5", "start": [ 22.547, 5, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C2", "step": 5, "group": "shell", "through": [ "P01" ], "product": "L06" }, { "id": "FL22.547-14", "start": [ 22.547, 14, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C2", "step": 5, "group": "shell", "through": [ "P01" ], "product": "L06" }, { "id": "FL5-16.547", "start": [ 5, 16.547, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C5", "step": 5, "group": "shell", "through": [ "P01" ], "product": "L06" }, { "id": "FL12-16.547", "start": [ 12, 16.547, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C5", "step": 5, "group": "shell", "through": [ "P01" ], "product": "L06" }, { "id": "FL19-16.547", "start": [ 19, 16.547, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C5", "step": 5, "group": "shell", "through": [ "P01" ], "product": "L06" }, { "id": "RF5-16.547", "start": [ 5, 16.547, 18.0 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C6", "step": 10, "group": "roof", "through": [ "P02" ], "product": "L06" }, { "id": "RF12-16.547", "start": [ 12, 16.547, 18.0 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C6", "step": 10, "group": "roof", "through": [ "P02" ], "product": "L06" }, { "id": "RF19-16.547", "start": [ 19, 16.547, 18.0 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "C6", "step": 10, "group": "roof", "through": [ "P02" ], "product": "L06" }, { "id": "FL4.5", "start": [ 1.4529999999999998, 0, 4.5 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "SL4.5", "start": [ 0, 1.4529999999999998, 4.5 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "P03" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FL9", "start": [ 1.4529999999999998, 0, 9 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "SL9", "start": [ 0, 1.4529999999999998, 9 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "P03" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FL14.5", "start": [ 1.4529999999999998, 0, 14.5 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "SL14.5", "start": [ 0, 1.4529999999999998, 14.5 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "P03" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FR4.5", "start": [ 22.547, 0, 4.5 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "SR4.5", "start": [ 24, 1.4529999999999998, 4.5 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "P04" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FR6", "start": [ 22.547, 0, 6 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "SR6", "start": [ 24, 1.4529999999999998, 6 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "P04" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FR12", "start": [ 22.547, 0, 12 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "SR12", "start": [ 24, 1.4529999999999998, 12 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "P04" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FR14.5", "start": [ 22.547, 0, 14.5 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "SR14.5", "start": [ 24, 1.4529999999999998, 14.5 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "P04" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FB6", "start": [ 6, 0, 1.4529999999999998 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FT6", "start": [ 6, 0, 16.547 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "BF6", "start": [ 6, 1.4529999999999998, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "P01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "RF6", "start": [ 6, 1.4529999999999998, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "P02" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FB12", "start": [ 12, 0, 1.4529999999999998 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FT12", "start": [ 12, 0, 16.547 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "BF12", "start": [ 12, 1.4529999999999998, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "P01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "RF12", "start": [ 12, 1.4529999999999998, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "P02" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FB18", "start": [ 18, 0, 1.4529999999999998 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "FT18", "start": [ 18, 0, 16.547 ], "axis": [ 0, 1, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "F01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "BF18", "start": [ 18, 1.4529999999999998, 0 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "P01" ], "product": "L06", "step": 8, "group": "front" }, { "id": "RF18", "start": [ 18, 1.4529999999999998, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "P02" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STL4", "start": [ 2.703, 1.1092499999999998, 4 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "DSL" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STL8", "start": [ 2.703, 1.1092499999999998, 8 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "DSL" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STL12", "start": [ 2.703, 1.1092499999999998, 12 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "DSL" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STL14", "start": [ 2.703, 1.1092499999999998, 14 ], "axis": [ -1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCL", "through": [ "DSL" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STR4", "start": [ 21.297, 1.1092499999999998, 4 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "DSR" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STR5.5", "start": [ 21.297, 1.1092499999999998, 5.5 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "DSR" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STR12.5", "start": [ 21.297, 1.1092499999999998, 12.5 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "DSR" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STR14", "start": [ 21.297, 1.1092499999999998, 14 ], "axis": [ 1, 0, 0 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCR", "through": [ "DSR" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STB5", "start": [ 5, 1.1092499999999998, 2.703 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "DSB" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STT5", "start": [ 5, 1.1092499999999998, 15.297 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "DST" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STB11", "start": [ 11, 1.1092499999999998, 2.703 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "DSB" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STT11", "start": [ 11, 1.1092499999999998, 15.297 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "DST" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STB17", "start": [ 17, 1.1092499999999998, 2.703 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCB", "through": [ "DSB" ], "product": "L06", "step": 8, "group": "front" }, { "id": "STT17", "start": [ 17, 1.1092499999999998, 15.297 ], "axis": [ 0, 0, 1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "FCT", "through": [ "DST" ], "product": "L06", "step": 8, "group": "front" }, { "id": "GCB0", "start": [ 3.7655, 1.2029999999999998, 2.98425 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCB", "GSB" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCB1", "start": [ 8, 1.2029999999999998, 2.98425 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCB", "GSB" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCB2", "start": [ 14, 1.2029999999999998, 2.98425 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCB", "GSB" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCB3", "start": [ 19.2345, 1.2029999999999998, 2.98425 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCB", "GSB" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCT0", "start": [ 3.7655, 1.2029999999999998, 15.01575 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCT", "GST" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCT1", "start": [ 8, 1.2029999999999998, 15.01575 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCT", "GST" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCT2", "start": [ 14, 1.2029999999999998, 15.01575 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCT", "GST" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCT3", "start": [ 19.2345, 1.2029999999999998, 15.01575 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCT", "GST" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCL0", "start": [ 2.98425, 1.2029999999999998, 5 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCL", "GSL" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCL1", "start": [ 2.98425, 1.2029999999999998, 9 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCL", "GSL" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCL2", "start": [ 2.98425, 1.2029999999999998, 13 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCL", "GSL" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCR0", "start": [ 20.01575, 1.2029999999999998, 5 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCR", "GSR" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCR1", "start": [ 20.01575, 1.2029999999999998, 9 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCR", "GSR" ], "product": "H03", "step": 8, "group": "door" }, { "id": "GCR2", "start": [ 20.01575, 1.2029999999999998, 13 ], "axis": [ 0, -1, 0 ], "length": 1, "diameter": 0.164, "headDiameter": 0.32, "receiver": "D01", "through": [ "GCR", "GSR" ], "product": "H03", "step": 8, "group": "door" }, { "id": "RM-RB1-1", "start": [ 1.5, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB1-2", "start": [ 3.5, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB1-3", "start": [ 7, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB1-4", "start": [ 10.5, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB1-5", "start": [ 14, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB1-6", "start": [ 17.5, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB1-7", "start": [ 21, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB1-8", "start": [ 22.5, 3.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB1", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-1", "start": [ 1.5, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-2", "start": [ 3.5, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-3", "start": [ 7, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-4", "start": [ 10.5, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-5", "start": [ 14, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-6", "start": [ 17.5, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-7", "start": [ 21, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB2-8", "start": [ 22.5, 14.5, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB2", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB3-1", "start": [ 1.5, 7, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB3", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB3-2", "start": [ 1.5, 11, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB3", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB4-1", "start": [ 22.5, 7, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB4", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "RM-RB4-2", "start": [ 22.5, 11, 18 ], "axis": [ 0, 0, -1 ], "length": 1.25, "diameter": 0.164, "headDiameter": 0.32, "receiver": "RB4", "step": 9, "group": "roof", "through": [ "P02", "MR" ], "product": "L06" }, { "id": "HP1", "start": [ 22.11, -0.07, 9 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.19, "headDiameter": 0.36, "receiver": "F01", "through": [ "HP-base" ], "product": "H05", "step": 13, "group": "front" }, { "id": "HP2", "start": [ 22.48, -0.07, 9.5 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.19, "headDiameter": 0.36, "receiver": "F01", "through": [ "HP-base" ], "product": "H05", "step": 13, "group": "front" }, { "id": "HP3", "start": [ 22.58, -0.07, 8.5 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.19, "headDiameter": 0.36, "receiver": "F01", "through": [ "HP-base" ], "product": "H05", "step": 13, "group": "front" }, { "id": "ST1", "start": [ 20.23, -0.07, 8.44 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.19, "headDiameter": 0.36, "receiver": "D01", "through": [ "ST-base" ], "product": "H05", "step": 13, "group": "door" }, { "id": "ST2", "start": [ 21.35, -0.07, 8.44 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.19, "headDiameter": 0.36, "receiver": "D01", "through": [ "ST-base" ], "product": "H05", "step": 13, "group": "door" }, { "id": "ST3", "start": [ 20.23, -0.07, 9.56 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.19, "headDiameter": 0.36, "receiver": "D01", "through": [ "ST-base" ], "product": "H05", "step": 13, "group": "door" }, { "id": "ST4", "start": [ 21.35, -0.07, 9.56 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.19, "headDiameter": 0.36, "receiver": "D01", "through": [ "ST-base" ], "product": "H05", "step": 13, "group": "door" }, { "id": "H1-fixed-s1", "start": [ 1.9192893700787401, -0.05905511811023623, 3.893700787401575 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "F01", "through": [ "H1-fixed" ], "product": "H02", "step": 12, "group": "front", "fieldTransfer": true }, { "id": "H1-fixed-s2", "start": [ 1.9192893700787401, -0.05905511811023623, 4.681102362204724 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "F01", "through": [ "H1-fixed" ], "product": "H02", "step": 12, "group": "front", "fieldTransfer": true }, { "id": "H1-moving-s1", "start": [ 2.5492106299212596, -0.05905511811023623, 3.893700787401575 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "D01", "through": [ "H1-moving" ], "product": "H02", "step": 12, "group": "door", "fieldTransfer": true }, { "id": "H1-moving-s2", "start": [ 2.5492106299212596, -0.05905511811023623, 4.681102362204724 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "D01", "through": [ "H1-moving" ], "product": "H02", "step": 12, "group": "door", "fieldTransfer": true }, { "id": "H2-fixed-s1", "start": [ 1.9192893700787401, -0.05905511811023623, 12.893700787401574 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "F01", "through": [ "H2-fixed" ], "product": "H02", "step": 12, "group": "front", "fieldTransfer": true }, { "id": "H2-fixed-s2", "start": [ 1.9192893700787401, -0.05905511811023623, 13.681102362204724 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "F01", "through": [ "H2-fixed" ], "product": "H02", "step": 12, "group": "front", "fieldTransfer": true }, { "id": "H2-moving-s1", "start": [ 2.5492106299212596, -0.05905511811023623, 12.893700787401574 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "D01", "through": [ "H2-moving" ], "product": "H02", "step": 12, "group": "door", "fieldTransfer": true }, { "id": "H2-moving-s2", "start": [ 2.5492106299212596, -0.05905511811023623, 13.681102362204724 ], "axis": [ 0, 1, 0 ], "length": 0.625, "diameter": 0.125, "headDiameter": 0.25, "receiver": "D01", "through": [ "H2-moving" ], "product": "H02", "step": 12, "group": "door", "fieldTransfer": true } ], "door": { "status": "Defined private engineering layout; received-hardware transfer and final model checks required", "construction": "One continuous plywood ring, separate continuous surround; no routed rebate or half-laps", "bareGapInches": 0.0625, "minimumFinishedGapInches": 0.03125, "maximumFinishedGapInches": 0.0625, "hinge": { "model": "NH-40R/SS", "quantity": 2, "orientation": "Front-face surface mounting with leaves coplanar at the shut-door position. Lower/pin leaf on fixed LEFT surround; upper/socket leaf on RIGHT door. Match manufacturer right-hand exploded drawing; both pins point upward. Do not use a mixed-handed pair.", "leafHeightMM": 40, "overallFlatWidthMM": 30, "leafThicknessMM": 1.5, "crossHolePitchMM": 16, "verticalHolePitchMM": 20, "holeDiameterMM": 3.5, "assembledBottomZInches": [ 3.5, 12.5 ], "mounting": "Seat actual assembled hinge flat across the joint; barrel out toward visitor. Center pin line over the gap; transfer all 4 holes from each actual hinge, never measure the exploded drawing as an installed template. Keep the two pin axes collinear with a straightedge.", "screwProduct": "H02", "screws": 8, "screwLengthInches": 0.625, "screwNominalEngagementInches": 0.5659448818897638, "axisXInches": 2.23425, "axisYInches": null, "axisYRule": "Measure actual pin centre from front seating plane after mounting. Drawing does not dimension this offset. Do not substitute illustration pixel measurement.", "fitCheck": "On same-thickness offcuts first: heads seat in hardware without opening countersinks; tips remain buried; leaves rotate freely from flat through 90 degrees; a 1/16-inch bare joint clears. Reject screws that do not seat; do not enlarge hinge holes.", "displayAxisYInches": -0.1377952755905512, "displayAxisBasis": "Nominal knuckle center for recognizable animation; received hinge sets actual offset under the retained fitting method." }, "removal": { "openDegrees": 90, "reserveLiftInches": 1.75, "method": "Release the swivel and swing the hasp clear, support door, swing to 90 degrees in clear front space, then lift both sockets together until clear. Refit both simultaneously. No removal with animals inside. Check actual release stroke below reserved 1-3/4 inch before fitting glazing.", "basis": "40mm complete hinge height bounds its pin engagement; 44.45mm reserved travel includes margin. Not a claimed manufacturer release stroke. Closed door top meets fixed surround after at most 1/16 inch lift." }, "glazing": { "viewOpeningInches": [ 15.469000000000001, 10.469000000000001 ], "paneCutInches": [ 16.469, 11.469000000000001 ], "paneOverlapInches": 0.5, "edgeClearanceInches": 0.0625, "nominalThicknessClearanceInches": 0.03, "caps": "1-inch-wide quarter-inch poplar, spacer strips 7/16 inch wide; 14 #8 x 1-inch pan screws outside pane edges.", "fitting": "Fit pane to FINISHED pocket with at least 1/16 inch at each edge and 1/64 inch front/back freedom; increase spacer thickness only enough to meet clearance and recheck fastener engagement. Do not compress, drill, glue or screw through acrylic. Clearance is a design allowance for this indoor shell, not a manufacturer thermal range certification." }, "latch": { "model": "National Hardware N305-979", "product": "H04", "quantity": 1, "everydayOperation": "Turn the staple a quarter turn to align with the slot, swing the hasp outward, then open the door. Close hasp and turn staple across slot to secure. No key required; padlock optional and not included.", "mounting": "Hasp hinge/base on fixed RIGHT surround, flap pointing LEFT when closed and covering its mounting screws. Square swivel-staple base on the wider RIGHT door border. Transfer holes from received hardware after trial.", "centerInches": [ 20.79, 0, 9 ], "displayHaspPivotInches": [ 23.08, -0.14, 9 ], "nominalBaseInches": [ 1.59, 1.59, 0.07 ], "nominalHolePitchInches": 1.12, "nominalSlotInches": [ 1.36, 0.44 ], "nominalTabWidthInches": 1.09, "drawing": "https://nationalhardwarestorage.blob.core.windows.net/documents/nh_td_v32_n305-979.pdf", "screwProduct": "H05", "screws": 7, "screwLengthInches": 0.625, "nominalWoodEngagementInches": 0.555, "nominalRearCoverInches": 0.148, "fitCheck": "On .703-inch stock offcuts separated by the specified gap: three hasp and four staple holes fully over solid wood; #10 heads seat without altering hardware; tips buried by at least 1/16 inch. Flap passes over aligned tab freely; quarter turn retains it. Transfer actual hardware, not illustration pixels. Repeat after coating.", "displayBasis": "Nominal manufacturer envelope and holes; formed offsets and hinge position are illustrative, not manufacturer CAD or a drilling template." } }, "deferredMaterials": [], "airflow": { "maxSubstrateAboveFloor": 1, "inletBottomAboveFloor": 3, "inletClearanceAboveFill": 2, "inletCount": 2, "inletOpening": [ 6, 1.5 ], "inletY": [ 6, 12 ], "meshAperture": 0.25, "meshOverlap": 0.75, "roofOpening": [ 20, 10 ], "claims": "Geometric low inlet/high outlet strategy only; no measured exchange, escape-proof or species claim", "roofOpeningOrigin": [ 2, 4 ] }, "withheld": [ "Received material and actual hardware measurements/trials", "Veneer supplier compatibility and full-size door balance/bond trial", "Prototype construction and physical testing", "Qualified review, species suitability and publication approval" ], "physicalTesting": "None claimed", "screenRetention": { "crossingEnvelopeInches": 0.0625, "coatedStackAllowanceInches": 0.012, "battenThicknessInches": 0.75, "screwLengthInches": 1.25, "pilotMethod": "Transfer received screw root diameter; stop before far batten face", "wireClearance": "Relieve obstructing wire only over solid plywood beneath batten; keep full 3/4-inch perimeter overlap and all cut ends covered", "noSpacer": true, "receivedCheck": "Measured crossing <=1/16 inch, no stand-off gap, no exposed cut wire" }, "finish": { "authority": "wbpu-r1-2026-09-24", "product": { "brand": "Varathane / Rust-Oleum", "name": "Triple Thick Polyurethane", "sheen": "satin", "appearance": "transparent clear finish with manufacturer-described soft amber hue", "format": "brush-on", "base": "water-based polyurethane/acrylic", "manufacturer_sku": "284473", "unit_upc": "020066273699", "lowes_item": "9181732", "lowes_seller_model": "284473-7482", "lowes_url": "https://www.lowes.com/pd/Varathane-Triple-Thick-Polyurethane-Clear-Wood-Finish-Self-Leveling-Formula-Scratch-And-Stain-Resistance-Durability-In-One-Coat-Satin-Quart/9181732", "seller": "Max Warehouse", "channel": "Lowe's Marketplace", "can_volume_quarts": 1, "cans_per_purchase_pack": 2, "purchase_pack_total_quarts": 2, "build_purchase_packs": 1, "affiliate_url": null, "creator_catalog_eligibility": "not_yet_checked", "availability": "Public page retrieved directly; cached fulfillment text is not current store stock or delivery evidence." }, "application": { "preparation": "Clean, dry, uncontaminated wood; sand 120 through 220 grit; vacuum and wipe with clean lint-free cloth.", "method": "Stir; do not shake. Use a quality synthetic-bristle brush along grain with adequate ventilation.", "ambient_temperature_f": { "minimum": 60, "maximum": 90 }, "relative_humidity_percent_exclusive_maximum": 85, "baseline_coats": 1, "coat_description": "One uniform coat per manufacturer; do not import a three-to-four-coat ordinary-polyurethane schedule.", "additional_coat": "If required, sand with 220 grit before recoating and include additional coat-area in quantity/fit calculation.", "recoat_hours_at_reference_conditions": 2, "light_use_hours_at_reference_conditions": 48, "full_cure_days_at_reference_conditions": 7, "full_cure_hours_at_reference_conditions": 168, "reference_conditions": { "temperature_f": 70, "relative_humidity_percent": 50, "ventilation": "adequate" }, "cure_variability": "Temperature, humidity and ventilation affect timing; colder/adverse conditions require longer. No universal adjustment formula supplied.", "occupancy_rule": "Complete full cure after final applied/repaired coat under recorded conditions; touch-dry, light use, odor alone and elapsed time on a defective coating are not sufficient.", "cleanup": "soap and water", "dry_film_mils_per_coat": 3, "dry_film_inches_per_coat": 0.003, "wet_film_mils_per_coat": 9, "wet_film_inches_per_coat": 0.009, "film_thickness_status": "Manufacturer nominal specification; verify actual finished interfaces." }, "coatingArea": { "revision": "v5-candidate-01", "method": "Whole rectangular wood-face upper bound, ignoring window deductions and buried-face exclusions. Add optional five-face preseal and another 15 percent contingency. The 50 sq ft/quart practical coverage already includes the manufacturer loss allowance.", "plainUpperBoundSqFt": 49.50914811111112, "optionalPresealUpperBoundSqFt": 11.176816895833333, "withAdditional15PercentContingencySqFt": 69.78885975798612, "practicalCoverageSqFtPerQuart": 50, "quartCansRequired": 2, "twoCanPurchasePacks": 1, "scope": "One final coat; optional preseal included. Additional coats require recalculation." }, "scope": "Ordinary indoor wood shells, typical moderate humidity, no immersion or permanent wet contact, fixtures separated from wood and radiant hotspots; complete exact-product cure.", "fit": "Nominal 3 mil dry film per face, verify all finished interfaces; source dimensions describe bare wood." }, "fabricationBasis": { "overall": [ 24, 18, 18 ], "stockRangeInches": [ 0.6875, 0.75 ], "sideHeight": "18 minus actual floor and roof thickness, transferred with one story stick", "backWidth": "scribe between actual sides on 24-inch floor", "cleats": "oversize fractional blanks, trim to actual mating faces", "rounding": "No independent rounding of mating parts", "exactSourceThicknessInches": 0.703, "sourceGeometry": "Versioned reference at measured-example .703 in stock; actual receiving fields remain blank.", "fitAcceptance": "faces meet without force or bowing; common flush edges; matching diagonals at dry fit; reject loose or short pieces", "front": "Scribe F01 to same actual cavity as P05. Mark 1-1/2 inch surround border. Fit separate door blank to that opening with 1/16 inch bare gaps; preserve minimum 1/32 inch finished gaps. Door borders 1-1/2 inch left/top/bottom, 2-1/2 inch right. Derive glazing from actual finished window, never independent decimal rounding." }, "modelContract": { "units": "inches in specification; metres in Blender and GLB", "geometry": "Machined wood, wire mesh, hardware envelopes, fastener paths and optional face veneers. Hardware profiles/pilots remain explicitly referenced, not received CAD.", "physicalTesting": "not performed", "inputPolicy": "No unrecorded independent rounding. Actual material changes require revised spec/model/layouts, not only text." }, "support": { "floorBearingInches": [ 24, 18 ], "requirement": "Continuous flat level support; actual furniture capacity selected for installed weight", "restraintStatus": "Proposed accessory, not a specified joint/bracing component; no universal requirement established. If intended installation requires it, attachment remains unresolved. No stability test claimed.", "equipmentScope": "One screen-top dome in the left supported lamp area. Internal lighting remains a separate fitted option; no external stand dependency." }, "roofBolts": [ { "id": "LB1-1", "center": [ 4.75, 3.5 ], "diameterInches": 0.25, "lengthInches": 2, "thread": "1/4-20", "head": "round machine-screw head above roof", "washers": 2, "nut": "Zinc-plated 1/4-20 Keps nut below retaining batten", "products": [ "L16", "L17", "L18" ], "stack": [ "P02", "MR", "LB1", "RB1" ] }, { "id": "LB1-2", "center": [ 4.75, 14.5 ], "diameterInches": 0.25, "lengthInches": 2, "thread": "1/4-20", "head": "round machine-screw head above roof", "washers": 2, "nut": "Zinc-plated 1/4-20 Keps nut below retaining batten", "products": [ "L16", "L17", "L18" ], "stack": [ "P02", "MR", "LB1", "RB2" ] }, { "id": "LB2-1", "center": [ 9.25, 3.5 ], "diameterInches": 0.25, "lengthInches": 2, "thread": "1/4-20", "head": "round machine-screw head above roof", "washers": 2, "nut": "Zinc-plated 1/4-20 Keps nut below retaining batten", "products": [ "L16", "L17", "L18" ], "stack": [ "P02", "MR", "LB2", "RB1" ] }, { "id": "LB2-2", "center": [ 9.25, 14.5 ], "diameterInches": 0.25, "lengthInches": 2, "thread": "1/4-20", "head": "round machine-screw head above roof", "washers": 2, "nut": "Zinc-plated 1/4-20 Keps nut below retaining batten", "products": [ "L16", "L17", "L18" ], "stack": [ "P02", "MR", "LB2", "RB2" ] } ], "lighting": { "scope": "Construction provision for one optional screen-top fixture; no species or wattage prescription", "example": { "manufacturer": "Fluker", "model": "27004", "name": "Mini Sun Dome", "url": "https://flukerfarms.com/mini-sun-dome/", "permittedMount": "Manufacturer permits placement on a screen top, external only", "electricalMaximumWatts": 100, "notRecommendedOperatingWatts": true }, "fixtureCenterInches": [ 7, 9 ], "maximumOverallDiameterInches": 6, "rimDiameterRangeInches": [ 5.5, 6 ], "maximumAssembledWeightPounds": 2, "weightBasis": "Proposed design load; weigh the received fixture and bulb. Not a manufacturer weight or tested roof rating.", "geometricWoodMarginInches": 2, "thermalBasis": "Geometric margin is not a universal thermal clearance. Use the fixture and bulb instructions, thermostat and actual temperature measurements before animals; keep heat off wood, finish and cables.", "supportParts": [ "LB1", "LB2" ], "placement": "Center the rigid flat rim over both strips, through the mesh, with all four contacts seated. No lamp elsewhere on unsupported cloth.", "coolSide": "Keep the right half free of heat fixtures; provide animal-specific shade and verify the finished temperature gradient.", "status": "Purchased steel and matching zinc-plated bolt/washer/Keps nut identified; assembled fit and thermal commissioning remain builder checks." }, "documentRevision": "illustrated-01", "baselineSha256": "c64c4f8d7a37770c54cf09e398b0ea2c491daafbe0eba60358169d7d439e680e", "auditSha256": "c98cf3e3797be55f8a0e69b5b914e1b0bdcef81ca2f9830d48ffbbd8c2a302e4", "inputs": { "width": 24, "depth": 18, "height": 18, "referencePlywoodThickness": 0.703, "squareCleat": 1.5, "kerf": 0.125, "sheetEdgeTrim": 0.25, "roughTrimPerEdge": 0.0625, "finishDryFilmPerFace": 0.003, "veneerReferenceThickness": 0.0245, "veneerMaximumThickness": 0.04, "veneerPresealFilm": 0.003, "veneerTopcoatFilm": 0.003 }, "configurations": { "plain": { "additionalFaceStack": 0 }, "veneer": { "additionalFaceStack": 0.0305, "maximumAdditionalFaceStack": 0.046, "product": "V01", "faces": [ "P03", "P04", "P05", "F01", "D01" ], "status": "Conditional option: complete full-sized door balance/bond trial before use" } }, "receivingHolds": [ { "id": "RH01", "item": "Wood and mesh", "before": "Final mating cuts", "method": "Measure actual plywood and square stock. Use floor/roof offcuts as story stick; scribe back and surround between actual sides. Mesh crossing at most 1/16 in (1.59 mm). Regenerate geometry for measured stock before calling the model an as-built record." }, { "id": "RH02", "item": "Hinge and screws", "before": "Cutting front/door", "method": "Offcut trial of received NH-40R/SS and 11325. Measure actual pin offset and release stroke; test two collinear pins, 90-degree sweep, buried tips and seated heads. Nominal display pin is not verified hardware CAD." }, { "id": "RH03", "item": "Swivel hasp", "before": "Drilling front/door", "method": "Transfer all seven holes from actual N305-979 at nominal center. Trial #10 x 5/8 screws; minimum 1/16 in rear wood cover. Verify slot clearance and retention after finish." }, { "id": "RH04", "item": "Veneer system", "before": "Applying optional veneer", "method": "Confirm 48 x 96 in standard maple / factory 3M PSA variant with supplier; ask about one-sided plywood balance, Varathane-presealed substrate, topcoat, and proposed heat/humidity. Full-size door trial must remain flat and preserve gaps. Measure veneer/backer/adhesive <=0.040 in (1.02 mm); no edge wrapping." }, { "id": "RH05", "item": "Fixture and completed environment", "before": "Occupancy", "method": "Qualified review and physical load/stability, heat, ventilation, moisture and containment testing remain unperformed. No species or roof load rating follows from this model." } ], "machining": { "clearanceInches": { "L06": 0.171875, "H03": 0.171875 }, "pilotReferenceInches": { "L06": 0.11, "H03": 0.11, "H02": 0.08, "H05": 0.13 }, "pilotStatus": "Visualization/reference bore only. Measure received screw root and prove the stopped pilot on same-stock offcuts; no supplied manufacturer root diameter. Never use these reference pilots as a drilling prescription.", "woodPilotTipCoverMinimum": 0.0625, "countersink": "Selected flat-head seating trial; pan-head H03 has no countersink. Do not enlarge hardware holes." }, "veneer": { "productURL": "https://oakwoodveneer.com/maple-veneer-flat-cut.html", "instructionsURL": "https://oakwoodveneer.com/content/PSA_Veneer_Installation_Guide.pdf", "publishedTotalThicknessInches": [ 0.023, 0.026 ], "publishedRangeQualifier": "Approximate supplier backer matrix, not a tolerance guarantee", "scope": "Outside side/back faces and outward surround/door faces only. No roof, floor, inside, edges, stops or joint bridging. Same stack on both hardware seating faces.", "sequence": "Dry-fit and drill all bare components; dismantle; mask bare glue contacts; preseal outward faces and fully cure; scuff/clean per PSA guide; veneer loose panels; trim flush and reopen holes/countersinks; dry trial; glue bare case joints; apply final finish; cure; refit removable hardware.", "bondWait": "No exact dwell published in selected PSA instruction. Obtain supplier dwell/finish approval before full-size trial; do not invent a fixed wait.", "balance": "Full-size door trial and supplier guidance unresolved; no guarantee from small coupons." }, "veneerParts": [ { "id": "V-P03", "name": "Optional maple face on P03", "lo": [ -0.0305, 0, 0.703 ], "size": [ 0.0305, 18.0, 16.594 ], "material": "veneer", "step": 2, "group": "shell", "opening": [ 6, 3.703, 6, 1.5 ], "product": "V01", "configuration": "veneer", "parentPart": "P03", "grainAxis": 2 }, { "id": "V-P04", "name": "Optional maple face on P04", "lo": [ 24.0, 0, 0.703 ], "size": [ 0.0305, 18.0, 16.594 ], "material": "veneer", "step": 2, "group": "shell", "opening": [ 6, 3.703, 6, 1.5 ], "product": "V01", "configuration": "veneer", "parentPart": "P04", "grainAxis": 2 }, { "id": "V-P05", "name": "Optional maple face on P05", "lo": [ 0.703, 18.0, 0.703 ], "size": [ 22.594, 0.0305, 16.594 ], "material": "veneer", "step": 5, "group": "shell", "product": "V01", "configuration": "veneer", "parentPart": "P05", "grainAxis": 2 }, { "id": "V-F01", "name": "Optional maple face on F01", "lo": [ 0.703, -0.0305, 0.703 ], "size": [ 22.594, 0.0305, 16.594 ], "material": "veneer", "step": 8, "group": "front", "opening": [ 2.203, 2.203, 19.594, 13.594000000000001 ], "openingAxis": 1, "product": "V01", "configuration": "veneer", "parentPart": "F01", "grainAxis": 2 }, { "id": "V-D01", "name": "Optional maple face on D01", "lo": [ 2.2655, -0.0305, 2.2655 ], "size": [ 19.469, 0.0305, 13.469000000000001 ], "material": "veneer", "step": 8, "group": "door", "opening": [ 3.7655, 3.7655, 15.469000000000001, 10.469000000000001 ], "openingAxis": 1, "product": "V01", "configuration": "veneer", "parentPart": "D01", "grainAxis": 2 } ], "purchasing": { "buildId": "p02-01", "entries": [ { "id": "L01", "title": "Birch sanded plywood, nominal 3/4 in, listed actual 0.703 in, 4 x 8 ft", "url": "https://www.lowes.com/pd/SoyStrong-NAF-3-4-in-HPVA-Birch-Plywood-Application-As-4-x-8/1000096524", "itemNumber": "786170", "model": "712849", "actualSpecifications": { "thicknessInches": 0.703, "listedWidthFeet": 4.039, "listedLengthFeet": 8.039, "cuttableBasisInches": [ 48, 96 ], "exposure": "Interior; not water resistant" }, "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 1, "partIds": [ "P01", "P02", "P03", "P04", "P05", "F01", "D01" ], "category": "construction material", "required": true, "manufacturerEvidence": [], "alternatives": [], "unresolvedCompatibility": [ "Measure received sheet thickness; .703 inch is the source basis, not a guarantee of every sheet." ], "cutPlan": "48 x 96 basis: row1 floor + side; row2 roof + side; row3 back + surround; row4 door. Leave saw kerf and trim blanks to actual stock.", "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Observed out of stock in the displayed Lowe’s storefront on September 24, 2026. Retained under owner authorization; temporary stock shortages do not require substitution.", "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. Out of stock in displayed storefront.", "checkedDate": "2026-10-09", "currentListingTitle": "3/4-in x 4-ft x 8-ft Birch Square Sanded Plywood", "currentListingURL": "https://www.lowes.com/pd/SoyStrong-NAF-3-4-in-HPVA-Birch-Plywood-Application-as-4-x-8/1000096524", "currentAvailability": "Out of stock in displayed storefront", "materialClaimLimit": "Current specifications say interior, non-structural and not water-resistant; NAF compliant is listed No. Do not infer NAF certification from the old URL." }, { "id": "L02", "title": "Pine board, actual 3/4 x 1-1/2 x 96 inches", "url": "https://www.lowes.com/pd/RELIABILT-1-in-x-2-in-x-8-ft-Pine-Board/5002020259", "itemNumber": "1206", "model": "L51244218", "actualSpecifications": { "actualInches": [ 0.75, 1.5, 96 ], "species": "Radiata pine", "treated": false }, "neededQuantity": 2, "purchasePackages": 2, "packageQuantity": 1, "partIds": [ "VLB", "VLT", "VLF", "VLR", "VRB", "VRT", "VRF", "VRR", "RB1", "RB2", "RB3", "RB4", "DSL", "DSR", "DSB", "DST" ], "category": "construction material", "required": true, "manufacturerEvidence": [], "alternatives": [], "unresolvedCompatibility": [ "Rip to 1 inch. Minimum nesting count excludes defects; inspect received dimensions and usable lengths." ], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Exact listing inspected September 24, 2026; the retrieved page did not expose a conclusive fulfillment status.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "cutPlan": "Two 96 in boards; partition 1-inch screen strips and 1/2-inch stops, allowing 1/8-inch kerf. Do not assume both widths can be ripped from the same 1.5-inch cross section.", "minimumLayoutBoards": 2, "checkedDate": "2026-10-09", "currentListingTitle": "RELIABILT 1-in x 2-in x 8-ft Unfinished Clear S4S Common Softwood Board", "currentListingURL": "https://www.lowes.com/pd/ReliaBilt-1-in-x-2-in-x-8-ft-Square-Unfinished-Pine-Board/5002020259", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "L12", "title": "Pine square board, actual 1-1/2 x 1-1/2 x 96 inches", "url": "https://www.lowes.com/pd/Common-2-in-x-2-in-x-8-ft-Actual-1-5-in-x-1-5-in-x-8-ft-Pine-Board/1000110413", "itemNumber": "810720", "model": "2X2 8 RPC", "actualSpecifications": { "actualInches": [ 1.5, 1.5, 96 ], "species": "Pine", "treated": false }, "neededQuantity": 2, "purchasePackages": 2, "packageQuantity": 1, "partIds": [ "C1", "C2", "C5", "C6", "C7", "C8", "FCB", "FCT", "FCL", "FCR" ], "category": "construction material", "required": true, "manufacturerEvidence": [], "alternatives": [], "unresolvedCompatibility": [ "Bought square stock replaces the tentative ripped stud proposal. Verify square edges, actual dimensions, straightness and clear usable lengths before machining half-laps. Minimum count excludes rejected stock." ], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Exact listing inspected September 24, 2026; the retrieved page did not expose a conclusive fulfillment status.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "minimumLayoutBoards": 2, "checkedDate": "2026-10-09", "currentListingTitle": "RELIABILT 2-in x 2-in x 8-ft Unfinished Clear S4S Common Softwood Board", "currentListingURL": "https://www.lowes.com/pd/Common-2-in-x-2-in-x-8-ft-Actual-1-5-in-x-1-5-in-x-8-ft-Pine-Board/1000110413", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "L04", "title": "Acorn galvanized hardware cloth", "url": "https://www.lowes.com/pd/Acorn-International-Acorn-5-ft-x-2-ft-Silver-Galvanized-Steel-Woven-Wire-Garden-Hardware-Cloth-Rolled-Fencing/5000200843", "itemNumber": "3210920", "model": "HC4245", "actualSpecifications": { "rollInches": [ 24, 60 ], "apertureInches": [ 0.25, 0.25 ], "gauge": 23, "material": "Galvanized steel", "cutsInches": [ [ 13.5, 11.5 ], [ 7.5, 3 ], [ 7.5, 3 ] ] }, "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 2, "partIds": [ "MR", "MSL", "MSR" ], "category": "construction material", "required": true, "manufacturerEvidence": [ "https://pdf.lowes.com/productdocuments/3f9fa71c-812f-427b-80a9-fe1c84bfa65b/64236925.pdf" ], "alternatives": [], "unresolvedCompatibility": [], "quantityEvidence": "Exact Lowe’s item 3210920 specifications list Package Quantity 2. Each roll is 2 x 5 ft. One roll supplies this build; buy one two-roll sale pack. Availability is separate and not promised.", "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Observed out of stock in the displayed Lowe’s storefront on September 24, 2026. Retained under owner authorization; temporary stock shortages do not require substitution.", "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. Out of stock in displayed storefront.", "cutPlan": "One 24 x 60 in roll: MR 21.5 x 11.5; MSL/MSR 7.5 x 3 in, covered 3/4 in overlap. Two-roll pack leaves one spare roll.", "checkedDate": "2026-10-09", "currentListingTitle": "Acorn Hardware 5-ft x 2-ft 23 -Gauge Silver Galvanized steel Hardware cloth Garden Fencing", "currentListingURL": "https://www.lowes.com/pd/Acorn-International-Acorn-5-ft-x-2-ft-Silver-Galvanized-Steel-Woven-Wire-Garden-Hardware-Cloth-Rolled-Fencing/5000200843", "currentAvailability": "Out of stock in displayed storefront" }, { "id": "L06", "title": "SPAX zinc flat-head Unidrive wood screws, #8 × 1 1/4 inches", "url": "https://www.lowes.com/pd/SPAX-8-x-1-1-4-in-SPAX-Flat-Head-Unidrive-Zinc-Coated-Screw-30CT/5001698621", "itemNumber": "3753157", "model": "4101010400322", "actualSpecifications": { "gauge": "#8", "lengthInches": 1.25, "head": "Flat MULTIhead", "drive": "Phillips/square combo" }, "neededQuantity": 106, "purchasePackages": 4, "packageQuantity": 30, "partIds": [ "VL1", "VL2", "VL3", "VL4", "VL5", "VL6", "VL7", "VL8", "VR1", "VR2", "VR3", "VR4", "VR5", "VR6", "VR7", "VR8", "RM1", "RM2", "RM3", "RM4", "RM5", "RM6", "RM7", "RM8", "RM9", "RM10", "RM11", "RM12", "RM13", "RM14", "SLB0", "SLB1", "SLB2", "SLR0", "SLR1", "SRB0", "SRB1", "SRB2", "SRR0", "SRR1", "BKB0", "BKB1", "BKB2", "BKT0", "BKT1", "BKT2", "BKV1.4529999999999998-3.703", "BKV1.4529999999999998-11.703", "BKV22.547-3.703", "BKV22.547-11.703", "FL1.4529999999999998-5", "FL1.4529999999999998-14", "FL22.547-5", "FL22.547-14", "FL5-16.547", "FL12-16.547", "FL19-16.547", "RF5-16.547", "RF12-16.547", "RF19-16.547", "FL4.5", "SL4.5", "FL9", "SL9", "FL14.5", "SL14.5", "FR4.5", "SR4.5", "FR6", "SR6", "FR12", "SR12", "FR14.5", "SR14.5", "FB6", "FT6", "BF6", "RF6", "FB12", "FT12", "BF12", "RF12", "FB18", "FT18", "BF18", "RF18", "STL4", "STL8", "STL12", "STL14", "STR4", "STR5.5", "STR12.5", "STR14", "STB5", "STT5", "STB11", "STT11", "STB17", "STT17" ], "category": "construction material", "required": true, "manufacturerEvidence": [], "alternatives": [], "unresolvedCompatibility": [ "60 settled preparation stations only. Final door/front and restraint hardware excluded. Received root diameter sets pilot; verify on same-stock offcut." ], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Official online listing and linked manufacturer evidence checked 2026-09-24. No store or ZIP selected; local stock, shipping date and cutting services are unverified.", "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. Out of stock in displayed storefront.", "checkedDate": "2026-10-09", "currentListingTitle": "SPAX Multi-Material #8 x 1-1/4-in Zinc-plated Interior Construction screws 30 -Per Box", "currentListingURL": "https://www.lowes.com/pd/SPAX-8-x-1-1-4-in-SPAX-Flat-Head-Unidrive-Zinc-Coated-Screw-30CT/5001698621", "currentAvailability": "Out of stock in displayed storefront" }, { "id": "L08", "title": "Titebond III Ultimate wood glue, 16 fluid ounces", "url": "https://www.lowes.com/pd/Titebond-Brown-Interior-Exterior-Wood-Adhesive-Actual-Net-Contents-16-fl-oz/1017425", "itemNumber": "1444", "model": "1414", "actualSpecifications": { "containerFluidOunces": 16, "applicationMinimumF": 45, "openMinutes": [ 8, 10 ], "totalAssemblyMinutes": [ 20, 25 ] }, "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 1, "partIds": [ "Optional bare-wood cleat mating faces" ], "category": "consumable", "required": false, "manufacturerEvidence": [ "https://www.titebond.com/print/product/e8d40b45-0ab3-49f7-8a9c-b53970f736af" ], "alternatives": [], "unresolvedCompatibility": [ "Not for continuous submersion, below waterline, or structural/load-bearing applications. Full cure per current label; do not equate food-contact approval with animal approval." ], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Official online listing and linked manufacturer evidence checked 2026-09-24. No store or ZIP selected; local stock, shipping date and cutting services are unverified.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "checkedDate": "2026-10-09", "currentListingTitle": "Titebond III Ultimate Wood Adhesive (Actual Net Contents: 16-fl oz )", "currentListingURL": "https://www.lowes.com/pd/Titebond-16-Oz-III-Ultimate-Wood-Glue/1017425", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "L14", "title": "Varathane Triple Thick water-based polyurethane clear satin", "url": "https://www.lowes.com/pd/Varathane-Triple-Thick-Polyurethane-Clear-Wood-Finish-Self-Leveling-Formula-Scratch-And-Stain-Resistance-Durability-In-One-Coat-Satin-Quart/9181732", "itemNumber": "9181732", "model": "284473-7482", "manufacturerSku": "284473", "unitUpc": "020066273699", "seller": "Max Warehouse", "channel": "Lowe’s Marketplace online; no local-stock claim", "canSizeQuarts": 1, "cansPerPack": 2, "requiredQuartCansSettledShell": 1, "purchasePacksSettledShell": 1, "coatingCalculation": { "sharedRevision": "wbpu-r1-2026-09-24", "coatCount": 1, "grossAllFaceAreaSqFt": 32.43708561111112, "excludedBuriedShellInterfacesSqFt": 4.9450242499999995, "actualSettledCoatedAreaSqFt": 27.492061361111123, "scope": "Accessible assembled shell surfaces plus all faces/edges of loose roof and detached battens; openings deducted, opening edges added. Buried shell glue interfaces excluded on both pieces. Mesh, hardware and unresolved front/door excluded. No screw-hole micro-surface correction.", "contacts": [ { "parts": [ "P01", "P03" ], "axis": 2, "contactSquareInches": 12.654 }, { "parts": [ "P01", "P04" ], "axis": 2, "contactSquareInches": 12.65399999999999 }, { "parts": [ "P01", "P05" ], "axis": 2, "contactSquareInches": 15.883581999999988 }, { "parts": [ "P01", "C1" ], "axis": 2, "contactSquareInches": 23.695500000000003 }, { "parts": [ "P01", "C2" ], "axis": 2, "contactSquareInches": 23.695500000000003 }, { "parts": [ "P01", "C5" ], "axis": 2, "contactSquareInches": 29.391000000000002 }, { "parts": [ "P03", "P05" ], "axis": 0, "contactSquareInches": 11.665581999999992 }, { "parts": [ "P03", "C1" ], "axis": 0, "contactSquareInches": 23.695500000000003 }, { "parts": [ "P03", "C7" ], "axis": 0, "contactSquareInches": 22.641000000000002 }, { "parts": [ "P04", "P05" ], "axis": 0, "contactSquareInches": 11.665581999999992 }, { "parts": [ "P04", "C2" ], "axis": 0, "contactSquareInches": 23.695500000000003 }, { "parts": [ "P04", "C8" ], "axis": 0, "contactSquareInches": 22.641000000000002 }, { "parts": [ "P05", "C1" ], "axis": 1, "contactSquareInches": 2.25 }, { "parts": [ "P05", "C2" ], "axis": 1, "contactSquareInches": 2.25 }, { "parts": [ "P05", "C5" ], "axis": 1, "contactSquareInches": 29.391000000000002 }, { "parts": [ "P05", "C6" ], "axis": 1, "contactSquareInches": 29.391000000000002 }, { "parts": [ "P05", "C7" ], "axis": 1, "contactSquareInches": 22.641000000000002 }, { "parts": [ "P05", "C8" ], "axis": 1, "contactSquareInches": 22.641000000000002 }, { "parts": [ "C1", "C5" ], "axis": 0, "contactSquareInches": 2.25 }, { "parts": [ "C1", "C7" ], "axis": 2, "contactSquareInches": 2.25 }, { "parts": [ "C2", "C5" ], "axis": 0, "contactSquareInches": 2.25 }, { "parts": [ "C2", "C8" ], "axis": 2, "contactSquareInches": 2.25 }, { "parts": [ "C6", "C7" ], "axis": 0, "contactSquareInches": 2.25 }, { "parts": [ "C6", "C8" ], "axis": 0, "contactSquareInches": 2.25 } ], "quartsConsumed": 0.5498412272222225, "quartCansRequired": 1, "twoCanPurchasePacks": 1, "practicalCoverageSqFtPerQuart": 50, "manufacturerLossAlreadyIncludedPercent": 15, "additionalReserveSqFt": 0, "packRemainderQuarts": 1.4501587727777774, "wholeBuildQuantityStatus": "Recalculate once door/front area is known; current quantity covers settled shell only." }, "authorityRevision": "wbpu-r1-2026-09-24", "quantityStatus": "settled shell only; not final whole-build affiliate BOM", "r08CoatingUpperBound": { "settledCoatedSqFt": 27.4920613611, "newWoodGrossSqFt": 9.680424041666665, "wholeBuildUpperBoundSqFt": 37.17248540276667, "method": "Settled net area plus gross new wood including buried faces; conservative procurement bound", "quartsConsumedUpperBound": 0.7434497080553334, "quartCansRequired": 1, "twoCanPurchasePacks": 1 }, "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 2, "partIds": [], "historicalVerifiedDate": null, "historicalAvailability": null, "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "checkedDate": "2026-10-09", "quantityBasis": { "revision": "v5-candidate-01", "method": "Whole rectangular wood-face upper bound, ignoring window deductions and buried-face exclusions. Add optional five-face preseal and another 15 percent contingency. The 50 sq ft/quart practical coverage already includes the manufacturer loss allowance.", "plainUpperBoundSqFt": 49.50914811111112, "optionalPresealUpperBoundSqFt": 11.176816895833333, "withAdditional15PercentContingencySqFt": 69.78885975798612, "practicalCoverageSqFtPerQuart": 50, "quartCansRequired": 2, "twoCanPurchasePacks": 1, "scope": "One final coat; optional preseal included. Additional coats require recalculation." }, "currentListingTitle": "Varathane Transparent Satin Clear Water-Based Polyurethane/Acrylic Triple Thick Polyurethane 1 qt 2 packs", "currentListingURL": "https://www.lowes.com/pd/Varathane-Transparent-Satin-Clear-Water-Based-Polyurethane-Acrylic-Triple-Thick-Polyurethane-1-qt/9181732", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "L03", "title": "OPTIX clear acrylic sheet", "url": "https://www.lowes.com/pd/OPTIX-0-22-in-T-x-18-in-W-x-24-in-L-Clear-Acrylic-Sheet/3502292", "itemNumber": "239981", "model": "1AG2123A", "actualSpecifications": { "actualInches": [ 0.22, 18, 24 ], "material": "Extruded acrylic" }, "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 1, "partIds": [ "G01" ], "category": "construction material", "required": true, "manufacturerEvidence": [ "https://plaskolite.com/docs/default-source/fab/fab004_opx_extruded.pdf" ], "alternatives": [], "unresolvedCompatibility": [ "Cut to actual finished pocket with declared edge and thickness freedom; no physical escape test." ], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Official online listing and linked manufacturer evidence checked 2026-09-24. No store or ZIP selected; local stock, shipping date and cutting services are unverified.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "checkedDate": "2026-10-09", "currentListingTitle": "OPTIX 0.22-in T x 18-in W x 24-in L Clear Acrylic Sheet", "currentListingURL": "https://www.lowes.com/pd/OPTIX-0-22-in-T-x-18-in-W-x-24-in-L-Clear-Acrylic-Sheet/3502292", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "L13", "title": "RELIABILT S4S poplar glazing-cap stock", "url": "https://www.lowes.com/pd/Common-4-ft-Actual-0-25-in-x-1-5-in-x-4-ft-Poplar-Board/1000118987", "itemNumber": "1220", "model": "L5201424", "actualSpecifications": { "actualInches": [ 0.25, 1.5, 48 ], "species": "Poplar", "treated": false }, "neededQuantity": 3, "purchasePackages": 3, "packageQuantity": 1, "partIds": [ "GSB", "GST", "GSL", "GSR", "GCB", "GCT", "GCL", "GCR" ], "category": "construction material", "required": true, "manufacturerEvidence": [], "alternatives": [], "unresolvedCompatibility": [ "Bought thickness; no cap resawing. Verify thickness and straightness for final glazing fit." ], "cutPlan": "Three 48-inch boards allocated as separate cap/spacer blanks in cuttingLayouts; allow 1/8-inch kerf. Rip each blank separately to 1 inch or 7/16 inch using guarded jig.", "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Official online listing and linked manufacturer evidence checked 2026-09-24. No store or ZIP selected; local stock, shipping date and cutting services are unverified.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "minimumLayoutBoards": 3, "checkedDate": "2026-10-09", "currentListingTitle": "RELIABILT 1/4-in x 2-in x 4-ft Unfinished FAS and Better S4S Common Hardwood Board", "currentListingURL": "https://www.lowes.com/pd/Common-4-ft-Actual-0-25-in-x-1-5-in-x-4-ft-Poplar-Board/1000118987", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "H01", "title": "Sugatsune lift-off hinge, RIGHT hand", "model": "NH-40R/SS", "url": "https://www.hingeoutlet.com/products/lift-off-hinges-1-37-64-x-1-3-16-for-cabinets-stainless-steel-sold-individually", "neededQuantity": 2, "packageQuantity": 1, "purchasePackages": 2, "required": true, "manufacturerEvidence": [ "https://www.sugatsune.com/lift-off-hinge-nh-40r-ss/", "https://www.sugatsune.com/content/site-assets/501_PDF/NH-40_KN.pdf" ], "sourceNotes": "Lowe item424846 is no longer sold. Exact right-hand SKU offered directly by HingeOutlet; verify selected handing before ordering. No delivery guarantee.", "partIds": [], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Exact right-hand listing displayed In Stock, Ships Next Business Day on September 24, 2026; not a reserved or address-specific delivery commitment.", "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. In Stock, Ships Next Business Day displayed; not reserved.", "checkedDate": "2026-10-09", "currentListingTitle": "Lift Off Hinges - For Cabinets 1-37/64\" X 1-3/16\" - Stainless Steel - Sold Individually", "currentListingURL": "https://www.hingeoutlet.com/products/lift-off-hinges-1-37-64-x-1-3-16-for-cabinets-stainless-steel-sold-individually", "currentAvailability": "In Stock, Ships Next Business Day displayed; not reserved" }, { "id": "H02", "title": "Quickscrews #5 x 5/8-inch flat Phillips hardware screws", "model": "11325", "url": "https://quickscrews.com/product/11325", "neededQuantity": 8, "packageQuantity": 100, "purchasePackages": 1, "required": true, "manufacturerEvidence": [ "https://quickscrews.com/product/11325" ], "sourceNotes": "Manufacturer directly sells100/pack. Sugatsune specifies3mm or#5. Verify actual countersink seating on offcuts; do not enlarge hinge holes.", "partIds": [], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Exact direct product page displayed price and Add to cart on September 24, 2026; delivery date unverified.", "verificationStatus": "Exact model identity retrieved; local fulfillment/variant confirmation remains required", "checkedDate": "2026-10-09" }, { "id": "H03", "title": "SPAX #8 x 1-inch PAN screws", "model": "4111010400252", "url": "https://www.lowes.com/pd/SPAX-8-x-1-in-SPAX-Pan-Head-Unidrive-Zinc-Coated-Screw-30CT/5001700969", "neededQuantity": 14, "packageQuantity": 30, "purchasePackages": 1, "required": true, "partIds": [ "GCB0", "GCB1", "GCB2", "GCB3", "GCT0", "GCT1", "GCT2", "GCT3", "GCL0", "GCL1", "GCL2", "GCR0", "GCR1", "GCR2" ], "historicalVerifiedDate": "2026-09-24", "historicalAvailability": null, "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. Out of stock in displayed storefront.", "checkedDate": "2026-10-09", "currentListingTitle": "SPAX Multi-Material #8 x 1-in Zinc-plated Interior Construction screws 30 -Per Box", "currentListingURL": "https://www.lowes.com/pd/SPAX-8-x-1-in-SPAX-Pan-Head-Unidrive-Zinc-Coated-Screw-30CT/5001700969", "currentAvailability": "Out of stock in displayed storefront" }, { "id": "H04", "title": "National Hardware black swivel-staple safety hasp, 3-1/4 inch", "model": "N305-979", "retailer": "Lowe’s", "itemNumber": "9180731", "listingModel": "N305-979-3026", "url": "https://www.lowes.com/pd/National-Hardware-Black-Steel-3-1-4-in-L-Swivel-Staple-Safety-Hasp-1-pk/9180731", "neededQuantity": 1, "packageQuantity": 1, "purchasePackages": 1, "required": true, "manufacturerEvidence": [ "https://nationalhardwarestorage.blob.core.windows.net/documents/nh_td_v32_n305-979.pdf", "https://www.national-hardware.com/p/32-swivel-staple-safety-hasps?model=N305-979" ], "partIds": [ "HP-base", "HP-pin", "HP-flap", "ST-base", "ST-washer", "ST-tab" ], "installation": "Use seven H05 screws after the offcut trial; do not use the longer supplied screws in thin plywood. Padlock optional, not required for closure.", "historicalVerifiedDate": "2026-09-25", "historicalAvailability": "Exact listing showed shipping availability (385), sold and shipped by Hearthshire marketplace. Pickup/delivery unavailable in displayed storefront. No address-specific fulfillment promise.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "checkedDate": "2026-10-09", "currentListingTitle": "National Hardware Black Steel 3 1/4 in. L Swivel Staple Safety Hasp 1 pk", "currentListingURL": "https://www.lowes.com/pd/National-Hardware-N305-979-V32-Swivel-Staple-Safety-Hasp-in-Black/9180731", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "L15", "title": "Hillman solid hot-rolled steel flat, 1 x 1/8 in x 36 in, model 11653", "model": "11653", "itemNumber": "44119", "retailer": "Lowe’s", "url": "https://www.lowes.com/pd/Hillman-3-ft-x-1-in-Hot-Rolled-Weldable-Steel-Slotted-Metal-Flat-Bar/3057587", "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 1, "partIds": [ "LB1", "LB2" ], "required": true, "category": "construction material", "affiliateStatus": "ordinary direct link", "affiliateUrl": null, "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Live store page showed pickup and delivery availability September 24, 2026. One bar yields two 12-inch pieces with saw kerf.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "minimumLayoutBoards": 1, "checkedDate": "2026-10-09", "currentListingTitle": "Hillman 1-in x 3-ft x 1/8-in Thick Exterior Plain Hot rolled steel Solid", "currentListingURL": "https://www.lowes.com/pd/Hillman-3-ft-x-1-in-Hot-Rolled-Steel-Solid/3057587", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "L16", "title": "Everbilt 1/4-20 × 2-inch zinc-plated round-head machine screws", "model": "831561", "itemNumber": "1006547984", "retailer": "Home Depot", "url": "https://www.homedepot.com/p/Everbilt-1-4-in-20-x-2-in-Combo-Round-Head-Zinc-Plated-Machine-Screw-3-Pack-831561/317479069", "neededQuantity": 4, "purchasePackages": 2, "packageQuantity": 3, "partIds": [ "B-LB1-1", "B-LB1-2", "B-LB2-1", "B-LB2-2" ], "required": true, "category": "construction material", "affiliateStatus": "ordinary direct link", "affiliateUrl": null, "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Exact 3-pack listing verified September 24, 2026. Address-specific stock unverified.", "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. Pickup and delivery offered in displayed storefront; not reserved.", "checkedDate": "2026-10-09", "currentListingTitle": "1/4 in.-20 x 2 in. Combo Round Head Zinc Plated Machine Screw (3-Pack)", "currentListingURL": "https://www.homedepot.com/p/Everbilt-1-4-in-20-x-2-in-Combo-Round-Head-Zinc-Plated-Machine-Screw-3-Pack-831561/317479069", "currentAvailability": "Pickup and delivery offered in displayed storefront; not reserved" }, { "id": "L17", "title": "Hillman 1/4-inch zinc-plated flat washers, 3/4-inch OD × 1/16 inch thick", "model": "270055", "itemNumber": "63306", "retailer": "Lowe’s", "url": "https://www.lowes.com/pd/Hillman-1-4-in-Zinc-Plated-Standard-SAE-Flat-Washer/3058557", "neededQuantity": 8, "purchasePackages": 8, "packageQuantity": 1, "partIds": [], "required": true, "category": "construction material", "affiliateStatus": "ordinary direct link", "affiliateUrl": null, "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Exact single-washer listing verified September 24, 2026. Address-specific stock unverified.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "checkedDate": "2026-10-09", "currentListingTitle": "Hillman 1/4-in Zinc-plated Standard Flat Washer", "currentListingURL": "https://www.lowes.com/pd/Hillman-1-4-in-Zinc-Plated-Standard-SAE-Flat-Washer/3058557", "currentAvailability": "Listing active; local fulfillment requires confirmation", "geometryHold": "Listing identifies 1/4-inch hole and one washer per package; outer diameter/thickness must be measured for the bolt stack." }, { "id": "L18", "title": "Hillman 1/4-20 zinc-plated Keps nuts", "model": "880483", "itemNumber": "137011", "retailer": "Lowe’s", "url": "https://www.lowes.com/pd/Hillman-2-Count-1-4-in-Zinc-Plated-Standard-SAE-Keps-Lock-Nuts/3012456", "neededQuantity": 4, "purchasePackages": 2, "packageQuantity": 2, "partIds": [], "required": true, "category": "construction material", "affiliateStatus": "ordinary direct link", "affiliateUrl": null, "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Exact 2-pack listing verified September 24, 2026. Address-specific stock unverified.", "verificationStatus": "Exact product identity and listed dimensions/package checked on 2026-10-09; local fulfillment requires confirmation.", "checkedDate": "2026-10-09", "currentListingTitle": "Hillman 1/4-in x 20 Zinc-plated Steel Keps Nut 2 Count", "currentListingURL": "https://www.lowes.com/pd/Hillman-2-Count-1-4-in-Zinc-Plated-Standard-SAE-Keps-Lock-Nuts/3012456", "currentAvailability": "Listing active; local fulfillment requires confirmation" }, { "id": "E01", "title": "Fluker Mini Sun Dome — optional screen-top fixture", "model": "27004", "itemNumber": "27004", "retailer": "Fluker", "url": "https://flukerfarms.com/mini-sun-dome/", "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 1, "partIds": [], "required": false, "category": "optional equipment", "affiliateStatus": "ordinary direct link", "affiliateUrl": null, "historicalVerifiedDate": "2026-09-24", "historicalAvailability": "Manufacturer listing and screen-top mounting permission verified September 24, 2026. Check received rim, full housing and weight against the guide before use.", "verificationStatus": "Exact model identity retrieved; local fulfillment/variant confirmation remains required", "checkedDate": "2026-10-09" }, { "id": "H05", "title": "Everbilt #10 × 5/8-inch zinc-plated Phillips flat-head wood screws, 12-pack", "model": "825391", "retailer": "Home Depot", "itemNumber": "317479421", "storeSKU": "1006524871", "url": "https://www.homedepot.com/p/Everbilt-10-x-5-8-in-Zinc-Plated-Phillips-Flat-Head-Wood-Screw-12-Pack-825391/317479421", "neededQuantity": 7, "packageQuantity": 12, "purchasePackages": 1, "required": true, "partIds": [ "HP1", "HP2", "HP3", "ST1", "ST2", "ST3", "ST4" ], "installation": "Trial actual flat heads in the hardware countersinks; use a stopped pilot and hand-tighten. Minimum 1/16-inch rear wood cover.", "historicalVerifiedDate": "2026-09-25", "historicalAvailability": "Exact model, size and 12-pack listing verified. Store/address-specific stock not exposed by retrieved page.", "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. Selected #10 / 5/8 inch / 12-pack, pickup and delivery offered; not reserved.", "checkedDate": "2026-10-09", "currentListingTitle": "#10 x 5/8 in. Zinc Plated Phillips Flat Head Wood Screw (12-Pack)", "currentListingURL": "https://www.homedepot.com/p/Everbilt-10-x-5-8-in-Zinc-Plated-Phillips-Flat-Head-Wood-Screw-12-Pack-825391/317479421", "currentAvailability": "Selected #10 / 5/8 inch / 12-pack, pickup and delivery offered; not reserved" }, { "id": "V01", "title": "Optional flat-cut maple, standard quality, 48 x 96 in, factory 3M PSA", "url": "https://oakwoodveneer.com/maple-veneer-flat-cut.html", "model": "MapleFC4x8PSA-I", "neededQuantity": 1, "purchasePackages": 1, "packageQuantity": 1, "partIds": [ "V-P03", "V-P04", "V-P05", "V-F01", "V-D01" ], "required": false, "category": "conditional exterior finish", "verificationStatus": "Exact listing/selection checked in rendered supplier page on 2026-10-09. Configured variant observed; general availability statement is not delivery confirmation. Special order, non-returnable. Application suitability remains RH04.", "actualSpecifications": { "publishedApproximateThicknessInches": [ 0.023, 0.026 ], "designMaximumInches": 0.04 }, "checkedDate": "2026-10-09", "selection": "Standard / 4 ft x 8 ft / Peel & Stick: 3M/PSA", "orderTerms": "Special order, non-returnable; confirm application before ordering", "currentListingTitle": "Maple Veneer Flat Cut", "currentListingURL": "https://oakwoodveneer.com/maple-veneer-flat-cut.html", "currentAvailability": "Configured variant observed; general availability statement is not delivery confirmation" } ], "remainingFulfillmentIssue": "Retailer availability is regional. See current research receipt; unconfirmed listings are not represented as in stock.", "revision": "v5-candidate-01", "sourcingPolicy": "Lowe’s and Home Depot primary; Amazon/direct suppliers as fallbacks. Temporary out-of-stock selections retained and labelled by owner instruction." }, "cuttingLayouts": [ { "id": "L01-plywood", "width": 48, "height": 96, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "P01", "x": 0.25, "y": 0.25, "w": 24.125, "h": 18.125 }, { "id": "P03", "x": 24.5, "y": 0.25, "w": 18.125, "h": 16.75 }, { "id": "P02", "x": 0.25, "y": 18.5, "w": 24.125, "h": 18.125 }, { "id": "P04", "x": 24.5, "y": 18.5, "w": 18.125, "h": 16.75 }, { "id": "P05", "x": 0.25, "y": 36.75, "w": 22.75, "h": 16.75 }, { "id": "F01", "x": 23.125, "y": 36.75, "w": 22.75, "h": 16.75 }, { "id": "D01", "x": 0.25, "y": 53.625, "w": 19.625, "h": 13.625 }, { "id": "RH04-door-trial", "x": 0.25, "y": 67.375, "w": 19.625, "h": 13.625 } ] }, { "id": "V01-maple", "width": 48, "height": 96, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "V-P03", "x": 0.25, "y": 0.25, "w": 18.25, "h": 16.875 }, { "id": "V-P04", "x": 18.625, "y": 0.25, "w": 18.25, "h": 16.875 }, { "id": "V-P05", "x": 0.25, "y": 17.25, "w": 22.875, "h": 16.875 }, { "id": "V-F01", "x": 23.25, "y": 17.25, "w": 22.875, "h": 16.875 }, { "id": "V-D01", "x": 0.25, "y": 34.25, "w": 19.75, "h": 13.75 }, { "id": "RH04-door-trial", "x": 20.125, "y": 34.25, "w": 19.75, "h": 13.75 } ] }, { "id": "L04-mesh-roll", "width": 24, "height": 60, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "MR", "x": 0.25, "y": 0.25, "w": 21.5, "h": 11.5 }, { "id": "MSL", "x": 0.25, "y": 11.875, "w": 7.5, "h": 3 }, { "id": "MSR", "x": 7.875, "y": 11.875, "w": 7.5, "h": 3 } ] }, { "id": "L03-acrylic", "width": 24, "height": 18, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "G01", "x": 0.25, "y": 0.25, "w": 16.5, "h": 11.5 } ] }, { "id": "L12-board-1", "width": 96, "height": 1.5, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "C5", "x": 0.25, "y": 0, "w": 19.75, "h": 1.5, "finishedWidth": 1.5 }, { "id": "C6", "x": 20.125, "y": 0, "w": 19.75, "h": 1.5, "finishedWidth": 1.5 }, { "id": "FCB", "x": 40.0, "y": 0, "w": 19.75, "h": 1.5, "finishedWidth": 1.5 }, { "id": "FCT", "x": 59.875, "y": 0, "w": 19.75, "h": 1.5, "finishedWidth": 1.5 }, { "id": "C1", "x": 79.75, "y": 0, "w": 16.0, "h": 1.5, "finishedWidth": 1.5 } ] }, { "id": "L12-board-2", "width": 96, "height": 1.5, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "C2", "x": 0.25, "y": 0, "w": 16.0, "h": 1.5, "finishedWidth": 1.5 }, { "id": "C7", "x": 16.375, "y": 0, "w": 15.25, "h": 1.5, "finishedWidth": 1.5 }, { "id": "C8", "x": 31.75, "y": 0, "w": 15.25, "h": 1.5, "finishedWidth": 1.5 }, { "id": "FCL", "x": 47.125, "y": 0, "w": 13.75, "h": 1.5, "finishedWidth": 1.5 }, { "id": "FCR", "x": 61.0, "y": 0, "w": 13.75, "h": 1.5, "finishedWidth": 1.5 } ] }, { "id": "L02-board-1", "width": 96, "height": 1.5, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "RB1", "x": 0.25, "y": 0, "w": 22.125, "h": 1.5, "finishedWidth": 1 }, { "id": "RB2", "x": 22.5, "y": 0, "w": 22.125, "h": 1.5, "finishedWidth": 1 }, { "id": "DSB", "x": 44.75, "y": 0, "w": 18.75, "h": 1.5, "finishedWidth": 0.5 }, { "id": "DST", "x": 63.625, "y": 0, "w": 18.75, "h": 1.5, "finishedWidth": 0.5 }, { "id": "RB3", "x": 82.5, "y": 0, "w": 10.125, "h": 1.5, "finishedWidth": 1 }, { "id": "VLF", "x": 92.75, "y": 0, "w": 1.625, "h": 1.5, "finishedWidth": 1 } ] }, { "id": "L02-board-2", "width": 96, "height": 1.5, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "DSL", "x": 0.25, "y": 0, "w": 13.75, "h": 1.5, "finishedWidth": 0.5 }, { "id": "DSR", "x": 14.125, "y": 0, "w": 13.75, "h": 1.5, "finishedWidth": 0.5 }, { "id": "RB4", "x": 28.0, "y": 0, "w": 10.125, "h": 1.5, "finishedWidth": 1 }, { "id": "VLB", "x": 38.25, "y": 0, "w": 8.125, "h": 1.5, "finishedWidth": 1 }, { "id": "VLT", "x": 46.5, "y": 0, "w": 8.125, "h": 1.5, "finishedWidth": 1 }, { "id": "VRB", "x": 54.75, "y": 0, "w": 8.125, "h": 1.5, "finishedWidth": 1 }, { "id": "VRT", "x": 63.0, "y": 0, "w": 8.125, "h": 1.5, "finishedWidth": 1 }, { "id": "VLR", "x": 71.25, "y": 0, "w": 1.625, "h": 1.5, "finishedWidth": 1 }, { "id": "VRF", "x": 73.0, "y": 0, "w": 1.625, "h": 1.5, "finishedWidth": 1 }, { "id": "VRR", "x": 74.75, "y": 0, "w": 1.625, "h": 1.5, "finishedWidth": 1 } ] }, { "id": "L13-board-1", "width": 48, "height": 1.5, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "GSB", "x": 0.25, "y": 0, "w": 17.625, "h": 1.5, "finishedWidth": 0.4375 }, { "id": "GST", "x": 18.0, "y": 0, "w": 17.625, "h": 1.5, "finishedWidth": 0.4375 }, { "id": "GSL", "x": 35.75, "y": 0, "w": 11.75, "h": 1.5, "finishedWidth": 0.4375 } ] }, { "id": "L13-board-2", "width": 48, "height": 1.5, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "GCB", "x": 0.25, "y": 0, "w": 17.625, "h": 1.5, "finishedWidth": 1 }, { "id": "GCT", "x": 18.0, "y": 0, "w": 17.625, "h": 1.5, "finishedWidth": 1 }, { "id": "GSR", "x": 35.75, "y": 0, "w": 11.75, "h": 1.5, "finishedWidth": 0.4375 } ] }, { "id": "L13-board-3", "width": 48, "height": 1.5, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "GCL", "x": 0.25, "y": 0, "w": 10.625, "h": 1.5, "finishedWidth": 1 }, { "id": "GCR", "x": 11.0, "y": 0, "w": 10.625, "h": 1.5, "finishedWidth": 1 } ] }, { "id": "L15-board-1", "width": 36, "height": 1, "edgeTrim": 0.25, "kerf": 0.125, "pieces": [ { "id": "LB1", "x": 0.25, "y": 0, "w": 12.0, "h": 1, "finishedWidth": 1 }, { "id": "LB2", "x": 12.375, "y": 0, "w": 12.0, "h": 1, "finishedWidth": 1 } ] } ], "cuts": [ { "id": "P01", "name": "Floor", "material": "plywood", "length": 24.0, "width": 18.0, "thickness": 0.703, "roughLength": 24.125, "roughWidth": 18.125, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "P02", "name": "Roof", "material": "plywood", "length": 24.0, "width": 18.0, "thickness": 0.703, "roughLength": 24.125, "roughWidth": 18.125, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "P03", "name": "Left side", "material": "plywood", "length": 18.0, "width": 16.594, "thickness": 0.703, "roughLength": 18.125, "roughWidth": 16.75, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "P04", "name": "Right side", "material": "plywood", "length": 18.0, "width": 16.594, "thickness": 0.703, "roughLength": 18.125, "roughWidth": 16.75, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "P05", "name": "Back", "material": "plywood", "length": 22.594, "width": 16.594, "thickness": 0.703, "roughLength": 22.75, "roughWidth": 16.75, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "C1", "name": "Solid cleat C1", "material": "pine", "length": 15.797, "width": 1.5, "thickness": 1.5, "roughLength": 16.0, "roughWidth": 1.5, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "C2", "name": "Solid cleat C2", "material": "pine", "length": 15.797, "width": 1.5, "thickness": 1.5, "roughLength": 16.0, "roughWidth": 1.5, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "C5", "name": "Solid cleat C5", "material": "pine", "length": 19.594, "width": 1.5, "thickness": 1.5, "roughLength": 19.75, "roughWidth": 1.5, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "C6", "name": "Solid cleat C6", "material": "pine", "length": 19.594, "width": 1.5, "thickness": 1.5, "roughLength": 19.75, "roughWidth": 1.5, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "C7", "name": "Solid cleat C7", "material": "pine", "length": 15.094000000000001, "width": 1.5, "thickness": 1.5, "roughLength": 15.25, "roughWidth": 1.5, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "C8", "name": "Solid cleat C8", "material": "pine", "length": 15.094000000000001, "width": 1.5, "thickness": 1.5, "roughLength": 15.25, "roughWidth": 1.5, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "MSL", "name": "L side vent mesh", "material": "mesh", "length": 7.5, "width": 3, "thickness": 0.0625, "roughLength": 7.5, "roughWidth": 3, "grainAxis": 1, "quantity": 1, "basis": "Finished reference size" }, { "id": "VLB", "name": "L vent retaining batten B", "material": "pine", "length": 8, "width": 1, "thickness": 0.75, "roughLength": 8.125, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "VLT", "name": "L vent retaining batten T", "material": "pine", "length": 8, "width": 1, "thickness": 0.75, "roughLength": 8.125, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "VLF", "name": "L vent retaining batten F", "material": "pine", "length": 1.5, "width": 1, "thickness": 0.75, "roughLength": 1.625, "roughWidth": 1, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "VLR", "name": "L vent retaining batten R", "material": "pine", "length": 1.5, "width": 1, "thickness": 0.75, "roughLength": 1.625, "roughWidth": 1, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "MSR", "name": "R side vent mesh", "material": "mesh", "length": 7.5, "width": 3, "thickness": 0.0625, "roughLength": 7.5, "roughWidth": 3, "grainAxis": 1, "quantity": 1, "basis": "Finished reference size" }, { "id": "VRB", "name": "R vent retaining batten B", "material": "pine", "length": 8, "width": 1, "thickness": 0.75, "roughLength": 8.125, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "VRT", "name": "R vent retaining batten T", "material": "pine", "length": 8, "width": 1, "thickness": 0.75, "roughLength": 8.125, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "VRF", "name": "R vent retaining batten F", "material": "pine", "length": 1.5, "width": 1, "thickness": 0.75, "roughLength": 1.625, "roughWidth": 1, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "VRR", "name": "R vent retaining batten R", "material": "pine", "length": 1.5, "width": 1, "thickness": 0.75, "roughLength": 1.625, "roughWidth": 1, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "MR", "name": "Roof mesh", "material": "mesh", "length": 21.5, "width": 11.5, "thickness": 0.0625, "roughLength": 21.5, "roughWidth": 11.5, "grainAxis": 0, "quantity": 1, "basis": "Finished reference size" }, { "id": "RB1", "name": "Roof retaining batten", "material": "pine", "length": 22, "width": 1, "thickness": 0.75, "roughLength": 22.125, "roughWidth": 1, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "RB2", "name": "Roof retaining batten", "material": "pine", "length": 22, "width": 1, "thickness": 0.75, "roughLength": 22.125, "roughWidth": 1, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "RB3", "name": "Roof retaining batten", "material": "pine", "length": 10, "width": 1, "thickness": 0.75, "roughLength": 10.125, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "RB4", "name": "Roof retaining batten", "material": "pine", "length": 10, "width": 1, "thickness": 0.75, "roughLength": 10.125, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "F01", "name": "Continuous plywood front surround", "material": "plywood", "length": 22.594, "width": 16.594, "thickness": 0.703, "roughLength": 22.75, "roughWidth": 16.75, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "FCB", "name": "Front lower receiver", "material": "pine", "length": 19.594, "width": 1.5, "thickness": 1.5, "roughLength": 19.75, "roughWidth": 1.5, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "FCT", "name": "Front roof receiver", "material": "pine", "length": 19.594, "width": 1.5, "thickness": 1.5, "roughLength": 19.75, "roughWidth": 1.5, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "FCL", "name": "Front left receiver", "material": "pine", "length": 13.594000000000001, "width": 1.5, "thickness": 1.5, "roughLength": 13.75, "roughWidth": 1.5, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "FCR", "name": "Continuous right receiver", "material": "pine", "length": 13.594, "width": 1.5, "thickness": 1.5, "roughLength": 13.75, "roughWidth": 1.5, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "D01", "name": "Continuous plywood door ring", "material": "plywood", "length": 19.469, "width": 13.469000000000001, "thickness": 0.703, "roughLength": 19.625, "roughWidth": 13.625, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "G01", "name": "Floating undrilled acrylic pane", "material": "acrylic", "length": 16.469, "width": 11.469000000000001, "thickness": 0.22, "roughLength": 16.5, "roughWidth": 11.469000000000001, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GSB", "name": "Glazing spacer B", "material": "poplar", "length": 17.469, "width": 0.4375, "thickness": 0.25, "roughLength": 17.625, "roughWidth": 0.4375, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GST", "name": "Glazing spacer T", "material": "poplar", "length": 17.469, "width": 0.4375, "thickness": 0.25, "roughLength": 17.625, "roughWidth": 0.4375, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GSL", "name": "Glazing spacer L", "material": "poplar", "length": 11.594000000000001, "width": 0.4375, "thickness": 0.25, "roughLength": 11.75, "roughWidth": 0.4375, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GSR", "name": "Glazing spacer R", "material": "poplar", "length": 11.594000000000001, "width": 0.4375, "thickness": 0.25, "roughLength": 11.75, "roughWidth": 0.4375, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GCB", "name": "Glazing cap B", "material": "poplar", "length": 17.469, "width": 1, "thickness": 0.25, "roughLength": 17.625, "roughWidth": 1, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GCT", "name": "Glazing cap T", "material": "poplar", "length": 17.469, "width": 1, "thickness": 0.25, "roughLength": 17.625, "roughWidth": 1, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GCL", "name": "Glazing cap L", "material": "poplar", "length": 10.469000000000001, "width": 1, "thickness": 0.25, "roughLength": 10.625, "roughWidth": 1, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "GCR", "name": "Glazing cap R", "material": "poplar", "length": 10.469000000000001, "width": 1, "thickness": 0.25, "roughLength": 10.625, "roughWidth": 1, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "DSL", "name": "Door stop DSL", "material": "pine", "length": 13.594000000000001, "width": 0.5, "thickness": 0.75, "roughLength": 13.75, "roughWidth": 0.5, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "DSR", "name": "Continuous right door stop", "material": "pine", "length": 13.594, "width": 0.5, "thickness": 0.75, "roughLength": 13.75, "roughWidth": 0.5, "grainAxis": 2, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "DSB", "name": "Door stop DSB", "material": "pine", "length": 18.594, "width": 0.5, "thickness": 0.75, "roughLength": 18.75, "roughWidth": 0.5, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "DST", "name": "Door stop DST", "material": "pine", "length": 18.594, "width": 0.5, "thickness": 0.75, "roughLength": 18.75, "roughWidth": 0.5, "grainAxis": 0, "quantity": 1, "basis": "Reference; fit against actual mating parts" }, { "id": "LB1", "name": "Steel support under lamp area", "material": "steel", "length": 12, "width": 1, "thickness": 0.125, "roughLength": 12.0, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Finished reference size" }, { "id": "LB2", "name": "Steel support under lamp area", "material": "steel", "length": 12, "width": 1, "thickness": 0.125, "roughLength": 12.0, "roughWidth": 1, "grainAxis": 1, "quantity": 1, "basis": "Finished reference size" }, { "id": "V-P03", "name": "Optional maple face on P03", "material": "veneer", "length": 18.0, "width": 16.594, "thickness": 0.0305, "roughLength": 18.25, "roughWidth": 16.875, "grainAxis": 2, "quantity": 1, "basis": "Finished reference size" }, { "id": "V-P04", "name": "Optional maple face on P04", "material": "veneer", "length": 18.0, "width": 16.594, "thickness": 0.0305, "roughLength": 18.25, "roughWidth": 16.875, "grainAxis": 2, "quantity": 1, "basis": "Finished reference size" }, { "id": "V-P05", "name": "Optional maple face on P05", "material": "veneer", "length": 22.594, "width": 16.594, "thickness": 0.0305, "roughLength": 22.875, "roughWidth": 16.875, "grainAxis": 2, "quantity": 1, "basis": "Finished reference size" }, { "id": "V-F01", "name": "Optional maple face on F01", "material": "veneer", "length": 22.594, "width": 16.594, "thickness": 0.0305, "roughLength": 22.875, "roughWidth": 16.875, "grainAxis": 2, "quantity": 1, "basis": "Finished reference size" }, { "id": "V-D01", "name": "Optional maple face on D01", "material": "veneer", "length": 19.469, "width": 13.469000000000001, "thickness": 0.0305, "roughLength": 19.75, "roughWidth": 13.75, "grainAxis": 2, "quantity": 1, "basis": "Finished reference size" } ] }